@@ -619,6 +619,7 @@ config MMC_SDHCI_SPRD
depends on ARCH_SPRD
depends on MMC_SDHCI_PLTFM
select MMC_SDHCI_IO_ACCESSORS
+ select MMC_SQHCI
help
This selects the SDIO Host Controller in Spreadtrum
SoCs, this driver supports R11(IP version: R11P0).
@@ -19,6 +19,7 @@
#include <linux/slab.h>
#include "sdhci-pltfm.h"
+#include "sqhci.h"
/* SDHCI_ARGUMENT2 register high 16bit */
#define SDHCI_SPRD_ARG2_STUFF GENMASK(31, 16)
@@ -379,6 +380,16 @@ static unsigned int sdhci_sprd_get_ro(struct sdhci_host *host)
return 0;
}
+static void sdhci_sprd_request_done(struct sdhci_host *host,
+ struct mmc_request *mrq)
+{
+ /* Validate if the request was from software queue firstly. */
+ if (sqhci_finalize_request(host->mmc, mrq))
+ return;
+
+ mmc_request_done(host->mmc, mrq);
+}
+
static struct sdhci_ops sdhci_sprd_ops = {
.read_l = sdhci_sprd_readl,
.write_l = sdhci_sprd_writel,
@@ -392,6 +403,7 @@ static unsigned int sdhci_sprd_get_ro(struct sdhci_host *host)
.hw_reset = sdhci_sprd_hw_reset,
.get_max_timeout_count = sdhci_sprd_get_max_timeout_count,
.get_ro = sdhci_sprd_get_ro,
+ .request_done = sdhci_sprd_request_done,
};
static void sdhci_sprd_request(struct mmc_host *mmc, struct mmc_request *mrq)
@@ -521,6 +533,7 @@ static int sdhci_sprd_probe(struct platform_device *pdev)
{
struct sdhci_host *host;
struct sdhci_sprd_host *sprd_host;
+ struct sqhci_host *sq_host;
struct clk *clk;
int ret = 0;
@@ -631,6 +644,16 @@ static int sdhci_sprd_probe(struct platform_device *pdev)
sprd_host->flags = host->flags;
+ sq_host = devm_kzalloc(&pdev->dev, sizeof(*sq_host), GFP_KERNEL);
+ if (!sq_host) {
+ ret = -ENOMEM;
+ goto err_cleanup_host;
+ }
+
+ ret = sqhci_init(sq_host, host->mmc);
+ if (ret)
+ goto err_cleanup_host;
+
ret = __sdhci_add_host(host);
if (ret)
goto err_cleanup_host;
@@ -689,6 +712,7 @@ static int sdhci_sprd_runtime_suspend(struct device *dev)
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host);
+ sqhci_suspend(host->mmc);
sdhci_runtime_suspend_host(host);
clk_disable_unprepare(sprd_host->clk_sdio);
@@ -717,6 +741,8 @@ static int sdhci_sprd_runtime_resume(struct device *dev)
goto clk_disable;
sdhci_runtime_resume_host(host, 1);
+ sqhci_resume(host->mmc);
+
return 0;
clk_disable:
Add software queue support to improve the performance. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> --- drivers/mmc/host/Kconfig | 1 + drivers/mmc/host/sdhci-sprd.c | 26 ++++++++++++++++++++++++++ 2 files changed, 27 insertions(+)