+ sdhci-add-auto-cmd12-support-for-esdhc-driver.patch added to -mm tree

Commit Message

Andrew Morton Aug. 3, 2010, 11:45 p.m. UTC

None

Patch

diff -puN drivers/mmc/host/sdhci-of-core.c~sdhci-add-auto-cmd12-support-for-esdhc-driver drivers/mmc/host/sdhci-of-core.c
--- a/drivers/mmc/host/sdhci-of-core.c~sdhci-add-auto-cmd12-support-for-esdhc-driver
+++ a/drivers/mmc/host/sdhci-of-core.c
@@ -154,6 +154,10 @@  static int __devinit sdhci_of_probe(stru
 		host->ops = &sdhci_of_data->ops;
 	}
 
+	if (of_get_property(np, "sdhci,auto-cmd12", NULL))
+		host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
+
+
 	if (of_get_property(np, "sdhci,1-bit-only", NULL))
 		host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;
 
diff -puN drivers/mmc/host/sdhci.c~sdhci-add-auto-cmd12-support-for-esdhc-driver drivers/mmc/host/sdhci.c
--- a/drivers/mmc/host/sdhci.c~sdhci-add-auto-cmd12-support-for-esdhc-driver
+++ a/drivers/mmc/host/sdhci.c
@@ -820,8 +820,12 @@  static void sdhci_set_transfer_mode(stru
 	WARN_ON(!host->data);
 
 	mode = SDHCI_TRNS_BLK_CNT_EN;
-	if (data->blocks > 1)
-		mode |= SDHCI_TRNS_MULTI;
+	if (data->blocks > 1) {
+		if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12)
+			mode |= SDHCI_TRNS_MULTI | SDHCI_TRNS_ACMD12;
+		else
+			mode |= SDHCI_TRNS_MULTI;
+	}
 	if (data->flags & MMC_DATA_READ)
 		mode |= SDHCI_TRNS_READ;
 	if (host->flags & SDHCI_REQ_USE_DMA)
@@ -1109,6 +1113,12 @@  static void sdhci_request(struct mmc_hos
 #ifndef SDHCI_USE_LEDS_CLASS
 	sdhci_activate_led(host);
 #endif
+	if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12) {
+		if (mrq->stop) {
+			mrq->data->stop = NULL;
+			mrq->stop = NULL;
+		}
+	}
 
 	host->mrq = mrq;
 
diff -puN drivers/mmc/host/sdhci.h~sdhci-add-auto-cmd12-support-for-esdhc-driver drivers/mmc/host/sdhci.h
--- a/drivers/mmc/host/sdhci.h~sdhci-add-auto-cmd12-support-for-esdhc-driver
+++ a/drivers/mmc/host/sdhci.h
@@ -247,6 +247,8 @@  struct sdhci_host {
 #define SDHCI_QUIRK_NO_HISPD_BIT			(1<<27)
 /* Controller is missing device caps. Use caps provided by host */
 #define SDHCI_QUIRK_MISSING_CAPS			(1<<28)
+/* Controller uses Auto CMD12 command to stop the transfer */
+#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12		(1<<29)
 
 	int			irq;		/* Device IRQ */
 	void __iomem *		ioaddr;		/* Mapped address */