diff mbox

Revert "mmc: sdhci-s3c: Add clk_(enable/disable) in runtime suspend/resume"

Message ID 201211072357.15572.heiko@sntech.de (mailing list archive)
State New, archived
Headers show

Commit Message

Heiko Stübner Nov. 7, 2012, 10:57 p.m. UTC
This reverts commit 2abeb5c5ded2e7f7d288058426fb0ae852adc77f, as it breaks
machines using the gpio-based card-detect option with a loop of

        mmc0: Timeout waiting for hardware interrupt.
        mmc0: Internal clock never stabilised.
        mmc0: Timeout waiting for hardware interrupt.
        mmc0: Internal clock never stabilised.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
This is of course meant for 3.7-rc

 drivers/mmc/host/sdhci-s3c.c |   29 ++---------------------------
 1 file changed, 2 insertions(+), 27 deletions(-)

Comments

Chris Ball Nov. 17, 2012, 9:14 p.m. UTC | #1
Hi Heiko,

On Wed, Nov 07 2012, Heiko Stübner wrote:
> This reverts commit 2abeb5c5ded2e7f7d288058426fb0ae852adc77f, as it breaks
> machines using the gpio-based card-detect option with a loop of
>
>         mmc0: Timeout waiting for hardware interrupt.
>         mmc0: Internal clock never stabilised.
>         mmc0: Timeout waiting for hardware interrupt.
>         mmc0: Internal clock never stabilised.
>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>

This doesn't apply to mmc-next, please could you rebase/resend?

Thanks,

- Chris.
Chris Ball Nov. 18, 2012, 7:05 p.m. UTC | #2
Hi,

On Sun, Nov 18 2012, Heiko Stübner wrote:
> Commit 2abeb5c5ded2 (Add clk_(enable/disable) in runtime suspend/resume)
> added the capability to stop the clocks when the device is runtime
> suspended, but forgot to handle the case of the card-detect using
> an external gpio.
>
> Therefore in the case that runtime-pm is enabled, start the io-clock
> when a card is inserted and stop it again once it is removed.
>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Thanks, pushed to mmc-next for 3.7.

- Chris.
diff mbox

Patch

diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 2903949..e019672 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -637,9 +637,7 @@  static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
 		goto err_no_busclks;
 	}
 
-#ifndef CONFIG_PM_RUNTIME
 	clk_enable(sc->clk_bus[sc->cur_clk]);
-#endif
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	host->ioaddr = devm_request_and_ioremap(&pdev->dev, res);
@@ -746,15 +744,10 @@  static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
 	    gpio_is_valid(pdata->ext_cd_gpio))
 		sdhci_s3c_setup_card_detect_gpio(sc);
 
-#ifdef CONFIG_PM_RUNTIME
-	clk_disable(sc->clk_io);
-#endif
 	return 0;
 
  err_req_regs:
-#ifndef CONFIG_PM_RUNTIME
 	clk_disable(sc->clk_bus[sc->cur_clk]);
-#endif
 	for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
 		if (sc->clk_bus[ptr]) {
 			clk_put(sc->clk_bus[ptr]);
@@ -793,17 +786,12 @@  static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
 	if (gpio_is_valid(sc->ext_cd_gpio))
 		gpio_free(sc->ext_cd_gpio);
 
-#ifdef CONFIG_PM_RUNTIME
-	clk_enable(sc->clk_io);
-#endif
 	sdhci_remove_host(host, 1);
 
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
-#ifndef CONFIG_PM_RUNTIME
 	clk_disable(sc->clk_bus[sc->cur_clk]);
-#endif
 	for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
 		if (sc->clk_bus[ptr]) {
 			clk_put(sc->clk_bus[ptr]);
@@ -843,28 +831,15 @@  static int sdhci_s3c_resume(struct device *dev)
 static int sdhci_s3c_runtime_suspend(struct device *dev)
 {
 	struct sdhci_host *host = dev_get_drvdata(dev);
-	struct sdhci_s3c *ourhost = to_s3c(host);
-	struct clk *busclk = ourhost->clk_io;
-	int ret;
-
-	ret = sdhci_runtime_suspend_host(host);
 
-	clk_disable(ourhost->clk_bus[ourhost->cur_clk]);
-	clk_disable(busclk);
-	return ret;
+	return sdhci_runtime_suspend_host(host);
 }
 
 static int sdhci_s3c_runtime_resume(struct device *dev)
 {
 	struct sdhci_host *host = dev_get_drvdata(dev);
-	struct sdhci_s3c *ourhost = to_s3c(host);
-	struct clk *busclk = ourhost->clk_io;
-	int ret;
 
-	clk_enable(busclk);
-	clk_enable(ourhost->clk_bus[ourhost->cur_clk]);
-	ret = sdhci_runtime_resume_host(host);
-	return ret;
+	return sdhci_runtime_resume_host(host);
 }
 #endif