| Message ID | 20140217100241.15040.24836.stgit@pagira.o2s.ch (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Feb 17, 2014 at 11:02:41AM +0100, David Lanzendörfer wrote: > Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch> > Signed-off-by: Hans de Goede <hdegoede@redhat.com> > --- > arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 8 +++ > arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 8 +++ > arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 23 +++++++++ > arch/arm/boot/dts/sun7i-a20.dtsi | 61 +++++++++++++++++++++++ > 4 files changed, 100 insertions(+) > I'd prefer to have three patches here: - One that add the controllers - One that add the pin muxing options - One that enable the controllers on the various boards. > diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts > index 5c51cb8..ae800b6 100644 > --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts > +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts > @@ -34,6 +34,14 @@ > }; > }; > > + mmc0: mmc@01c0f000 { > + pinctrl-names = "default", "default"; > + pinctrl-0 = <&mmc0_pins_a>; > + pinctrl-1 = <&mmc0_cd_pin_reference_design>; This can be made a single pinctrl group, you don't need the pinctrl-1 stuff, it only complicates the node. > + cd-gpios = <&pio 7 1 0>; /* PH1 */ > + status = "okay"; > + }; > + > pinctrl@01c20800 { > led_pins_cubieboard2: led_pins@0 { > allwinner,pins = "PH20", "PH21"; > diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts > index f9dcb61..370cef84 100644 > --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts > +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts > @@ -19,6 +19,14 @@ > compatible = "cubietech,cubietruck", "allwinner,sun7i-a20"; > > soc@01c00000 { > + mmc0: mmc@01c0f000 { > + pinctrl-names = "default", "default"; > + pinctrl-0 = <&mmc0_pins_a>; > + pinctrl-1 = <&mmc0_cd_pin_reference_design>; > + cd-gpios = <&pio 7 1 0>; /* PH1 */ > + status = "okay"; > + }; > + > pinctrl@01c20800 { > led_pins_cubietruck: led_pins@0 { > allwinner,pins = "PH7", "PH11", "PH20", "PH21"; > diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts > index ead3013..685ec06 100644 > --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts > +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts > @@ -34,7 +34,30 @@ > }; > }; > > + mmc0: mmc@01c0f000 { > + pinctrl-names = "default", "default"; > + pinctrl-0 = <&mmc0_pins_a>; > + pinctrl-1 = <&mmc0_cd_pin_reference_design>; > + cd-gpios = <&pio 7 1 0>; /* PH1 */ > + status = "okay"; > + }; > + > + mmc3: mmc@01c12000 { > + pinctrl-names = "default", "default"; > + pinctrl-0 = <&mmc3_pins_a>; > + pinctrl-1 = <&mmc3_cd_pin_olinuxinom>; > + cd-gpios = <&pio 7 11 0>; /* PH11 */ > + status = "okay"; > + }; > + > pinctrl@01c20800 { > + mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { > + allwinner,pins = "PH11"; > + allwinner,function = "gpio_in"; > + allwinner,drive = <0>; > + allwinner,pull = <1>; > + }; > + > led_pins_olinuxino: led_pins@0 { > allwinner,pins = "PH2"; > allwinner,function = "gpio_out"; > diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi > index 9ff0948..5b55414 100644 > --- a/arch/arm/boot/dts/sun7i-a20.dtsi > +++ b/arch/arm/boot/dts/sun7i-a20.dtsi > @@ -355,6 +355,46 @@ > #size-cells = <0>; > }; > > + mmc0: mmc@01c0f000 { > + compatible = "allwinner,sun5i-a13-mmc"; > + reg = <0x01c0f000 0x1000>; > + clocks = <&ahb_gates 8>, <&mmc0_clk>; > + clock-names = "ahb", "mod"; > + interrupts = <0 32 4>; > + bus-width = <4>; This belongs to the board, the controller itself is able to handle several bus width. > + status = "disabled"; > + }; > + > + mmc1: mmc@01c10000 { > + compatible = "allwinner,sun5i-a13-mmc"; > + reg = <0x01c10000 0x1000>; > + clocks = <&ahb_gates 9>, <&mmc1_clk>; > + clock-names = "ahb", "mod"; > + interrupts = <0 33 4>; > + bus-width = <4>; > + status = "disabled"; > + }; > + > + mmc2: mmc@01c11000 { > + compatible = "allwinner,sun5i-a13-mmc"; > + reg = <0x01c11000 0x1000>; > + clocks = <&ahb_gates 10>, <&mmc2_clk>; > + clock-names = "ahb", "mod"; > + interrupts = <0 34 4>; > + bus-width = <4>; > + status = "disabled"; > + }; > + > + mmc3: mmc@01c12000 { > + compatible = "allwinner,sun5i-a13-mmc"; > + reg = <0x01c12000 0x1000>; > + clocks = <&ahb_gates 11>, <&mmc3_clk>; > + clock-names = "ahb", "mod"; > + interrupts = <0 35 4>; > + bus-width = <4>; > + status = "disabled"; > + }; > + > pio: pinctrl@01c20800 { > compatible = "allwinner,sun7i-a20-pinctrl"; > reg = <0x01c20800 0x400>; > @@ -432,6 +472,27 @@ > allwinner,drive = <0>; > allwinner,pull = <0>; > }; > + > + mmc0_pins_a: mmc0@0 { > + allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; > + allwinner,function = "mmc0"; > + allwinner,drive = <3>; > + allwinner,pull = <0>; > + }; > + > + mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { > + allwinner,pins = "PH1"; > + allwinner,function = "gpio_in"; > + allwinner,drive = <0>; > + allwinner,pull = <1>; > + }; > + > + mmc3_pins_a: mmc3@0 { > + allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9"; > + allwinner,function = "mmc3"; > + allwinner,drive = <3>; > + allwinner,pull = <0>; > + }; > }; > > timer@01c20c00 { > Looks good otherwise. Thanks! Maxime
Hi, On 02/18/2014 03:22 PM, Maxime Ripard wrote: > On Mon, Feb 17, 2014 at 11:02:41AM +0100, David Lanzendörfer wrote: >> Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch> >> Signed-off-by: Hans de Goede <hdegoede@redhat.com> >> --- >> arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 8 +++ >> arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 8 +++ >> arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 23 +++++++++ >> arch/arm/boot/dts/sun7i-a20.dtsi | 61 +++++++++++++++++++++++ >> 4 files changed, 100 insertions(+) >> > > I'd prefer to have three patches here: > - One that add the controllers > - One that add the pin muxing options > - One that enable the controllers on the various boards. > >> diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts >> index 5c51cb8..ae800b6 100644 >> --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts >> +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts >> @@ -34,6 +34,14 @@ >> }; >> }; >> >> + mmc0: mmc@01c0f000 { >> + pinctrl-names = "default", "default"; >> + pinctrl-0 = <&mmc0_pins_a>; >> + pinctrl-1 = <&mmc0_cd_pin_reference_design>; > > This can be made a single pinctrl group, you don't need the pinctrl-1 > stuff, it only complicates the node. Then how do we deal with boards which use a different gpio for card-detect ? In that case we don't want to change the mux setting of the reference design cd pin. IOW I believe that having 2 separate pinctrl settings for this is the rigt thing todo. I would prefer using just mmc0_cd_pin_a instead of _reference_design though. Oh wait, you're probably talking about using: pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; Yes that would be better. > >> + cd-gpios = <&pio 7 1 0>; /* PH1 */ >> + status = "okay"; >> + }; >> + >> pinctrl@01c20800 { >> led_pins_cubieboard2: led_pins@0 { >> allwinner,pins = "PH20", "PH21"; >> diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts >> index f9dcb61..370cef84 100644 >> --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts >> +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts >> @@ -19,6 +19,14 @@ >> compatible = "cubietech,cubietruck", "allwinner,sun7i-a20"; >> >> soc@01c00000 { >> + mmc0: mmc@01c0f000 { >> + pinctrl-names = "default", "default"; >> + pinctrl-0 = <&mmc0_pins_a>; >> + pinctrl-1 = <&mmc0_cd_pin_reference_design>; >> + cd-gpios = <&pio 7 1 0>; /* PH1 */ >> + status = "okay"; >> + }; >> + >> pinctrl@01c20800 { >> led_pins_cubietruck: led_pins@0 { >> allwinner,pins = "PH7", "PH11", "PH20", "PH21"; >> diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts >> index ead3013..685ec06 100644 >> --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts >> +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts >> @@ -34,7 +34,30 @@ >> }; >> }; >> >> + mmc0: mmc@01c0f000 { >> + pinctrl-names = "default", "default"; >> + pinctrl-0 = <&mmc0_pins_a>; >> + pinctrl-1 = <&mmc0_cd_pin_reference_design>; >> + cd-gpios = <&pio 7 1 0>; /* PH1 */ >> + status = "okay"; >> + }; >> + >> + mmc3: mmc@01c12000 { >> + pinctrl-names = "default", "default"; >> + pinctrl-0 = <&mmc3_pins_a>; >> + pinctrl-1 = <&mmc3_cd_pin_olinuxinom>; >> + cd-gpios = <&pio 7 11 0>; /* PH11 */ >> + status = "okay"; >> + }; >> + >> pinctrl@01c20800 { >> + mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { >> + allwinner,pins = "PH11"; >> + allwinner,function = "gpio_in"; >> + allwinner,drive = <0>; >> + allwinner,pull = <1>; >> + }; >> + >> led_pins_olinuxino: led_pins@0 { >> allwinner,pins = "PH2"; >> allwinner,function = "gpio_out"; >> diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi >> index 9ff0948..5b55414 100644 >> --- a/arch/arm/boot/dts/sun7i-a20.dtsi >> +++ b/arch/arm/boot/dts/sun7i-a20.dtsi >> @@ -355,6 +355,46 @@ >> #size-cells = <0>; >> }; >> >> + mmc0: mmc@01c0f000 { >> + compatible = "allwinner,sun5i-a13-mmc"; >> + reg = <0x01c0f000 0x1000>; >> + clocks = <&ahb_gates 8>, <&mmc0_clk>; >> + clock-names = "ahb", "mod"; >> + interrupts = <0 32 4>; >> + bus-width = <4>; > > This belongs to the board, the controller itself is able to handle > several bus width. I believe that providing some form of default in the dtsi makes sense here and all boards we've seen sofar always use 4 bits, we can always override this from the dts file itself. > >> + status = "disabled"; >> + }; >> + >> + mmc1: mmc@01c10000 { >> + compatible = "allwinner,sun5i-a13-mmc"; >> + reg = <0x01c10000 0x1000>; >> + clocks = <&ahb_gates 9>, <&mmc1_clk>; >> + clock-names = "ahb", "mod"; >> + interrupts = <0 33 4>; >> + bus-width = <4>; >> + status = "disabled"; >> + }; >> + >> + mmc2: mmc@01c11000 { >> + compatible = "allwinner,sun5i-a13-mmc"; >> + reg = <0x01c11000 0x1000>; >> + clocks = <&ahb_gates 10>, <&mmc2_clk>; >> + clock-names = "ahb", "mod"; >> + interrupts = <0 34 4>; >> + bus-width = <4>; >> + status = "disabled"; >> + }; >> + >> + mmc3: mmc@01c12000 { >> + compatible = "allwinner,sun5i-a13-mmc"; >> + reg = <0x01c12000 0x1000>; >> + clocks = <&ahb_gates 11>, <&mmc3_clk>; >> + clock-names = "ahb", "mod"; >> + interrupts = <0 35 4>; >> + bus-width = <4>; >> + status = "disabled"; >> + }; >> + >> pio: pinctrl@01c20800 { >> compatible = "allwinner,sun7i-a20-pinctrl"; >> reg = <0x01c20800 0x400>; >> @@ -432,6 +472,27 @@ >> allwinner,drive = <0>; >> allwinner,pull = <0>; >> }; >> + >> + mmc0_pins_a: mmc0@0 { >> + allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; >> + allwinner,function = "mmc0"; >> + allwinner,drive = <3>; >> + allwinner,pull = <0>; >> + }; >> + >> + mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { >> + allwinner,pins = "PH1"; >> + allwinner,function = "gpio_in"; >> + allwinner,drive = <0>; >> + allwinner,pull = <1>; >> + }; >> + >> + mmc3_pins_a: mmc3@0 { >> + allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9"; >> + allwinner,function = "mmc3"; >> + allwinner,drive = <3>; >> + allwinner,pull = <0>; >> + }; >> }; >> >> timer@01c20c00 { >> > > Looks good otherwise. > > Thanks! > Maxime > Regards, Hans -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Feb 18, 2014 at 04:10:38PM +0100, Hans de Goede wrote: > Hi, > > On 02/18/2014 03:22 PM, Maxime Ripard wrote: > >On Mon, Feb 17, 2014 at 11:02:41AM +0100, David Lanzendörfer wrote: > >>Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch> > >>Signed-off-by: Hans de Goede <hdegoede@redhat.com> > >>--- > >> arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 8 +++ > >> arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 8 +++ > >> arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 23 +++++++++ > >> arch/arm/boot/dts/sun7i-a20.dtsi | 61 +++++++++++++++++++++++ > >> 4 files changed, 100 insertions(+) > >> > > > >I'd prefer to have three patches here: > > - One that add the controllers > > - One that add the pin muxing options > > - One that enable the controllers on the various boards. > > > >>diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts > >>index 5c51cb8..ae800b6 100644 > >>--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts > >>+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts > >>@@ -34,6 +34,14 @@ > >> }; > >> }; > >> > >>+ mmc0: mmc@01c0f000 { > >>+ pinctrl-names = "default", "default"; > >>+ pinctrl-0 = <&mmc0_pins_a>; > >>+ pinctrl-1 = <&mmc0_cd_pin_reference_design>; > > > >This can be made a single pinctrl group, you don't need the pinctrl-1 > >stuff, it only complicates the node. > > Then how do we deal with boards which use a different gpio for card-detect ? > > In that case we don't want to change the mux setting of the reference > design cd pin. IOW I believe that having 2 separate pinctrl settings for > this is the rigt thing todo. I would prefer using just mmc0_cd_pin_a instead > of _reference_design though. > > Oh wait, you're probably talking about using: > pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; > > Yes that would be better. Yep, exactly :) > > > >>+ cd-gpios = <&pio 7 1 0>; /* PH1 */ > >>+ status = "okay"; > >>+ }; > >>+ > >> pinctrl@01c20800 { > >> led_pins_cubieboard2: led_pins@0 { > >> allwinner,pins = "PH20", "PH21"; > >>diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts > >>index f9dcb61..370cef84 100644 > >>--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts > >>+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts > >>@@ -19,6 +19,14 @@ > >> compatible = "cubietech,cubietruck", "allwinner,sun7i-a20"; > >> > >> soc@01c00000 { > >>+ mmc0: mmc@01c0f000 { > >>+ pinctrl-names = "default", "default"; > >>+ pinctrl-0 = <&mmc0_pins_a>; > >>+ pinctrl-1 = <&mmc0_cd_pin_reference_design>; > >>+ cd-gpios = <&pio 7 1 0>; /* PH1 */ > >>+ status = "okay"; > >>+ }; > >>+ > >> pinctrl@01c20800 { > >> led_pins_cubietruck: led_pins@0 { > >> allwinner,pins = "PH7", "PH11", "PH20", "PH21"; > >>diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts > >>index ead3013..685ec06 100644 > >>--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts > >>+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts > >>@@ -34,7 +34,30 @@ > >> }; > >> }; > >> > >>+ mmc0: mmc@01c0f000 { > >>+ pinctrl-names = "default", "default"; > >>+ pinctrl-0 = <&mmc0_pins_a>; > >>+ pinctrl-1 = <&mmc0_cd_pin_reference_design>; > >>+ cd-gpios = <&pio 7 1 0>; /* PH1 */ > >>+ status = "okay"; > >>+ }; > >>+ > >>+ mmc3: mmc@01c12000 { > >>+ pinctrl-names = "default", "default"; > >>+ pinctrl-0 = <&mmc3_pins_a>; > >>+ pinctrl-1 = <&mmc3_cd_pin_olinuxinom>; > >>+ cd-gpios = <&pio 7 11 0>; /* PH11 */ > >>+ status = "okay"; > >>+ }; > >>+ > >> pinctrl@01c20800 { > >>+ mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { > >>+ allwinner,pins = "PH11"; > >>+ allwinner,function = "gpio_in"; > >>+ allwinner,drive = <0>; > >>+ allwinner,pull = <1>; > >>+ }; > >>+ > >> led_pins_olinuxino: led_pins@0 { > >> allwinner,pins = "PH2"; > >> allwinner,function = "gpio_out"; > >>diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi > >>index 9ff0948..5b55414 100644 > >>--- a/arch/arm/boot/dts/sun7i-a20.dtsi > >>+++ b/arch/arm/boot/dts/sun7i-a20.dtsi > >>@@ -355,6 +355,46 @@ > >> #size-cells = <0>; > >> }; > >> > >>+ mmc0: mmc@01c0f000 { > >>+ compatible = "allwinner,sun5i-a13-mmc"; > >>+ reg = <0x01c0f000 0x1000>; > >>+ clocks = <&ahb_gates 8>, <&mmc0_clk>; > >>+ clock-names = "ahb", "mod"; > >>+ interrupts = <0 32 4>; > >>+ bus-width = <4>; > > > >This belongs to the board, the controller itself is able to handle > >several bus width. > > I believe that providing some form of default in the dtsi makes sense > here and all boards we've seen sofar always use 4 bits, we can always > override this from the dts file itself. There's already a documented default that is 1. Plus, I still believe in a strict separation between what's in the SoC being in the DTSI and what's in the board being in the DTS. Apart from being more rigorous, it also has the advantage of being *much* clearer whenever your read a board DTS, since you don't have to actually open several DTS(I) to get what's going on.
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 5c51cb8..ae800b6 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -34,6 +34,14 @@ }; }; + mmc0: mmc@01c0f000 { + pinctrl-names = "default", "default"; + pinctrl-0 = <&mmc0_pins_a>; + pinctrl-1 = <&mmc0_cd_pin_reference_design>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + status = "okay"; + }; + pinctrl@01c20800 { led_pins_cubieboard2: led_pins@0 { allwinner,pins = "PH20", "PH21"; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index f9dcb61..370cef84 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -19,6 +19,14 @@ compatible = "cubietech,cubietruck", "allwinner,sun7i-a20"; soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default", "default"; + pinctrl-0 = <&mmc0_pins_a>; + pinctrl-1 = <&mmc0_cd_pin_reference_design>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + status = "okay"; + }; + pinctrl@01c20800 { led_pins_cubietruck: led_pins@0 { allwinner,pins = "PH7", "PH11", "PH20", "PH21"; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index ead3013..685ec06 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -34,7 +34,30 @@ }; }; + mmc0: mmc@01c0f000 { + pinctrl-names = "default", "default"; + pinctrl-0 = <&mmc0_pins_a>; + pinctrl-1 = <&mmc0_cd_pin_reference_design>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + status = "okay"; + }; + + mmc3: mmc@01c12000 { + pinctrl-names = "default", "default"; + pinctrl-0 = <&mmc3_pins_a>; + pinctrl-1 = <&mmc3_cd_pin_olinuxinom>; + cd-gpios = <&pio 7 11 0>; /* PH11 */ + status = "okay"; + }; + pinctrl@01c20800 { + mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { + allwinner,pins = "PH11"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + led_pins_olinuxino: led_pins@0 { allwinner,pins = "PH2"; allwinner,function = "gpio_out"; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 9ff0948..5b55414 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -355,6 +355,46 @@ #size-cells = <0>; }; + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mod"; + interrupts = <0 32 4>; + bus-width = <4>; + status = "disabled"; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ahb_gates 9>, <&mmc1_clk>; + clock-names = "ahb", "mod"; + interrupts = <0 33 4>; + bus-width = <4>; + status = "disabled"; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb_gates 10>, <&mmc2_clk>; + clock-names = "ahb", "mod"; + interrupts = <0 34 4>; + bus-width = <4>; + status = "disabled"; + }; + + mmc3: mmc@01c12000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c12000 0x1000>; + clocks = <&ahb_gates 11>, <&mmc3_clk>; + clock-names = "ahb", "mod"; + interrupts = <0 35 4>; + bus-width = <4>; + status = "disabled"; + }; + pio: pinctrl@01c20800 { compatible = "allwinner,sun7i-a20-pinctrl"; reg = <0x01c20800 0x400>; @@ -432,6 +472,27 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <3>; + allwinner,pull = <0>; + }; + + mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { + allwinner,pins = "PH1"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + + mmc3_pins_a: mmc3@0 { + allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9"; + allwinner,function = "mmc3"; + allwinner,drive = <3>; + allwinner,pull = <0>; + }; }; timer@01c20c00 {