@@ -611,11 +611,6 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
host->card_busy = sh_mobile_sdhi_card_busy;
host->start_signal_voltage_switch =
sh_mobile_sdhi_start_signal_voltage_switch;
- host->init_tuning = sh_mobile_sdhi_init_tuning;
- host->prepare_tuning = sh_mobile_sdhi_prepare_tuning;
- host->select_tuning = sh_mobile_sdhi_select_tuning;
- host->check_scc_error = sh_mobile_sdhi_check_scc_error;
- host->hw_reset = sh_mobile_sdhi_hw_reset;
}
/* Orginally registers were 16 bit apart, could be 32 or 64 nowadays */
@@ -656,6 +651,7 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
if (ret < 0)
goto efree;
+ /* Enable tuning iff we have an SCC and a supported mode */
if (of_data && of_data->scc_offset && host->mmc->caps & MMC_CAP_UHS_SDR104) {
const struct sh_mobile_sdhi_scc *taps = of_data->taps;
bool hit = false;
@@ -675,6 +671,11 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
dev_warn(&host->pdev->dev, "Unknown clock rate for SDR104\n");
priv->scc_ctl = host->ctl + of_data->scc_offset;
+ host->init_tuning = sh_mobile_sdhi_init_tuning;
+ host->prepare_tuning = sh_mobile_sdhi_prepare_tuning;
+ host->select_tuning = sh_mobile_sdhi_select_tuning;
+ host->check_scc_error = sh_mobile_sdhi_check_scc_error;
+ host->hw_reset = sh_mobile_sdhi_hw_reset;
}
i = 0;
Prerequisites for tuning are the same as for hw_reset. We need an SCC and a supported mode. Populate the tuning related functions only when those conditions are met. This also removes a tiny race window. Previously, the functions were populated when the SCC offset was not initialized which could have led to an OOPS. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> --- drivers/mmc/host/sh_mobile_sdhi.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)