diff mbox

[RFC,2/2] mmc: sdhci-msm: enable SDHCI_QUIRK2_BROKEN_SDMA_BOUNDARY_BUFFER

Message ID 20170628133504.17422-3-srinivas.kandagatla@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Srinivas Kandagatla June 28, 2017, 1:35 p.m. UTC 
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

Programming legacy HOST SDMA Buffer Boundary bits in Block Size Register
(0x04) is not supported in Qualcomm sdhci controllers. Writing to this
would cause the controller not to transfer last block in case block size
is 4 bytes or less.

This issue was noticed while testing sdio wlan card on Qcom DB410c board.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 drivers/mmc/host/sdhci-msm.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 9d601dc0d646..50f650301ae6 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -1114,7 +1114,8 @@  static const struct sdhci_pltfm_data sdhci_msm_pdata = {
 		  SDHCI_QUIRK_NO_CARD_NO_RESET |
 		  SDHCI_QUIRK_SINGLE_POWER_WRITE |
 		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
-	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+		   SDHCI_QUIRK2_BROKEN_SDMA_BOUNDARY_BUFFER,
 	.ops = &sdhci_msm_ops,
 };