diff mbox

[v3,09/10] ARM: dts: sun8i: a83t: cubietruck-plus: Enable micro-SD card and eMMC

Message ID 20170724135905.28855-10-wens@csie.org (mailing list archive)
State New, archived
Headers show

Commit Message

Chen-Yu Tsai July 24, 2017, 1:59 p.m. UTC 
Now that we support the MMC controllers on the A83T SoC, we can enable
them on some boards.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts | 27 ++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

Comments

Maxime Ripard July 25, 2017, 7:38 a.m. UTC | #1 
On Mon, Jul 24, 2017 at 09:59:04PM +0800, Chen-Yu Tsai wrote:
> Now that we support the MMC controllers on the A83T SoC, we can enable
> them on some boards.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>

Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Thanks!
Maxime
diff mbox

Patch

diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
index cff33454fc24..163ddf8868b5 100644
--- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -83,6 +83,13 @@ 
 		};
 	};
 
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "On-board SPDIF";
@@ -102,6 +109,26 @@ 
 	};
 };
 
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
 &spdif {
 	status = "okay";
 };