| Message ID | 20171003112417.31860-2-martin.blumenstingl@googlemail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 3 October 2017 at 13:24, Martin Blumenstingl <martin.blumenstingl@googlemail.com> wrote: > From: Carlo Caione <carlo@endlessm.com> > > This documents the devicetree bindings for the SDIO/MMC host found in > Amlogic Meson8 and Meson8b SoCs. It supports the SD specification v2.0 > and the eMMC specification v4.41. > It has an internal "mux" which allows connecting up to three MMC devices > to it. The maximum supported bus-width is 4-bits. > > Amlogic's GPL kernel sources call it "SDIO" to differentiate it from the > other MMC controller in (at least the Meson8 and Meson8b) the SoCs (they > call the other one "SDHC", which supports a bus-width of up to 8-bits). > > Signed-off-by: Carlo Caione <carlo@endlessm.com> > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > Acked-by: Rob Herring <robh@kernel.org> Thanks, applied for next! Kind regards Uffe > --- > .../bindings/mmc/amlogic,meson-mx-sdio.txt | 54 ++++++++++++++++++++++ > 1 file changed, 54 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt > > diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt > new file mode 100644 > index 000000000000..8765c605e6bc > --- /dev/null > +++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt > @@ -0,0 +1,54 @@ > +* Amlogic Meson6, Meson8 and Meson8b SDIO/MMC controller > + > +The highspeed MMC host controller on Amlogic SoCs provides an interface > +for MMC, SD, SDIO and SDHC types of memory cards. > + > +Supported maximum speeds are the ones of the eMMC standard 4.41 as well > +as the speed of SD standard 2.0. > + > +The hardware provides an internal "mux" which allows up to three slots > +to be controlled. Only one slot can be accessed at a time. > + > +Required properties: > + - compatible : must be one of > + - "amlogic,meson8-sdio" > + - "amlogic,meson8b-sdio" > + along with the generic "amlogic,meson-mx-sdio" > + - reg : mmc controller base registers > + - interrupts : mmc controller interrupt > + - #address-cells : must be 1 > + - size-cells : must be 0 > + - clocks : phandle to clock providers > + - clock-names : must contain "core" and "clkin" > + > +Required child nodes: > +A node for each slot provided by the MMC controller is required. > +NOTE: due to a driver limitation currently only one slot (= child node) > + is supported! > + > +Required properties on each child node (= slot): > + - compatible : must be "mmc-slot" (see mmc.txt within this directory) > + - reg : the slot (or "port") ID > + > +Optional properties on each child node (= slot): > + - bus-width : must be 1 or 4 (8-bit bus is not supported) > + - for cd and all other additional generic mmc parameters > + please refer to mmc.txt within this directory > + > +Examples: > + mmc@c1108c20 { > + compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio"; > + reg = <0xc1108c20 0x20>; > + interrupts = <0 28 1>; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>; > + clock-names = "core", "clkin"; > + > + slot@1 { > + compatible = "mmc-slot"; > + reg = <1>; > + > + bus-width = <4>; > + }; > + }; > -- > 2.14.2 > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt new file mode 100644 index 000000000000..8765c605e6bc --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt @@ -0,0 +1,54 @@ +* Amlogic Meson6, Meson8 and Meson8b SDIO/MMC controller + +The highspeed MMC host controller on Amlogic SoCs provides an interface +for MMC, SD, SDIO and SDHC types of memory cards. + +Supported maximum speeds are the ones of the eMMC standard 4.41 as well +as the speed of SD standard 2.0. + +The hardware provides an internal "mux" which allows up to three slots +to be controlled. Only one slot can be accessed at a time. + +Required properties: + - compatible : must be one of + - "amlogic,meson8-sdio" + - "amlogic,meson8b-sdio" + along with the generic "amlogic,meson-mx-sdio" + - reg : mmc controller base registers + - interrupts : mmc controller interrupt + - #address-cells : must be 1 + - size-cells : must be 0 + - clocks : phandle to clock providers + - clock-names : must contain "core" and "clkin" + +Required child nodes: +A node for each slot provided by the MMC controller is required. +NOTE: due to a driver limitation currently only one slot (= child node) + is supported! + +Required properties on each child node (= slot): + - compatible : must be "mmc-slot" (see mmc.txt within this directory) + - reg : the slot (or "port") ID + +Optional properties on each child node (= slot): + - bus-width : must be 1 or 4 (8-bit bus is not supported) + - for cd and all other additional generic mmc parameters + please refer to mmc.txt within this directory + +Examples: + mmc@c1108c20 { + compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio"; + reg = <0xc1108c20 0x20>; + interrupts = <0 28 1>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>; + clock-names = "core", "clkin"; + + slot@1 { + compatible = "mmc-slot"; + reg = <1>; + + bus-width = <4>; + }; + };