@@ -288,9 +288,9 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
struct device *dev = omap_host->dev;
struct mmc_ios *ios = &mmc->ios;
u32 start_window = 0, max_window = 0;
+ bool dcrc_was_enabled = false;
u8 cur_match, prev_match = 0;
u32 length = 0, max_len = 0;
- u32 ier = host->ier;
u32 phase_delay = 0;
int ret = 0;
u32 reg;
@@ -317,9 +317,10 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
* during the tuning procedure. So disable it during the
* tuning procedure.
*/
- ier &= ~SDHCI_INT_DATA_CRC;
- sdhci_writel(host, ier, SDHCI_INT_ENABLE);
- sdhci_writel(host, ier, SDHCI_SIGNAL_ENABLE);
+ if (host->ier & SDHCI_INT_DATA_CRC) {
+ host->ier &= ~SDHCI_INT_DATA_CRC;
+ dcrc_was_enabled = true;
+ }
while (phase_delay <= MAX_PHASE_DELAY) {
sdhci_omap_set_dll(omap_host, phase_delay);
@@ -366,6 +367,9 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
ret:
sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
+ /* Reenable forbidden interrupt */
+ if (dcrc_was_enabled)
+ host->ier |= SDHCI_INT_DATA_CRC;
sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
return ret;
Commit 7d33c3581536 ("mmc: sdhci-omap: Workaround for Errata i802") disabled DCRC interrupts during tuning. This write to the interrupt enable register gets overwritten in sdhci_prepare_data() and the interrupt is not in fact disabled. Fix this by disabling the interrupt in the host->ier variable. Fixes: 7d33c3581536 ("mmc: sdhci-omap: Workaround for Errata i802") Cc: <stable@vger.kernel.org> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> --- drivers/mmc/host/sdhci-omap.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)