diff mbox series

[03/11,v4] mmc: s3cmci: Use the slot GPIO descriptor

Message ID 20181202084328.25546-4-linus.walleij@linaro.org (mailing list archive)
State New, archived
Headers show
Series Use GPIO descriptors for CD/WP | expand

Commit Message

Linus Walleij Dec. 2, 2018, 8:43 a.m. UTC 
Simplify things by making the S3CMCI driver just use
slot GPIO with descriptors instead of passing around the
global GPIO numbers that we want to get rid of.

Getting the names of the GPIO chips into the machine
descriptor tables was a bit of a challenge but I think
I have them right.

The platform data supports passing in inversion flags, but
no platform is using them, and it is highly unlikely
that we will add more, so drop them. The long term plan
is to let the inversion flags on the GPIO machine
descriptor do the job.

The lines are flagged as GPIO_ACTIVE_[LOW|HIGH] as that is
what they are, and since we can now rely on the descriptors
to have the right polarity, we set the
"override_active_level" to false in mmc_gpiod_request_cd()
and mmc_gpiod_request_ro().

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Sergio Prado <sergio.prado@e-labworks.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v3->v4:
- Collect Krzysztof's review tag.
- Fix commit message to say why we do not override the active
  level anymore.
ChangeLog v2->v3:
- Fix the missed write protect inversion on mini2440
  so restored the ability to pass this flag to the core.
  Also adding the ACTIVE_HIGH flag to the GPIO in the
  lookup table so the polarity will be correct in the
  descriptor even if we are not using it yet.
- Keep the snippet dropping the card detect inversion flag
  as no host was using that.
ChangeLog v1->v2:
- Fix erroneous gpiochip labels "GPIOG" to just "GPG" etc.

Some testing of this would be greatly appreciated.
---
 arch/arm/mach-s3c24xx/mach-at2440evb.c   | 14 ++++++++++--
 arch/arm/mach-s3c24xx/mach-h1940.c       | 15 ++++++++++--
 arch/arm/mach-s3c24xx/mach-mini2440.c    | 15 ++++++++++--
 arch/arm/mach-s3c24xx/mach-n30.c         | 15 ++++++++++--
 arch/arm/mach-s3c24xx/mach-rx1950.c      | 15 ++++++++++--
 drivers/mmc/host/s3cmci.c                | 29 +++++++++---------------
 include/linux/platform_data/mmc-s3cmci.h |  4 ----
 7 files changed, 75 insertions(+), 32 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index 68a4fa94257a..58c5ef3cf1d7 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -9,7 +9,7 @@ 
 
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
 #include <linux/timer.h>
@@ -136,7 +136,16 @@  static struct platform_device at2440evb_device_eth = {
 };
 
 static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = {
-	.gpio_detect	= S3C2410_GPG(10),
+	/* Intentionally left blank */
+};
+
+static struct gpiod_lookup_table at2440evb_mci_gpio_table = {
+	.dev_id = "s3c2410-sdi",
+	.table = {
+		/* Card detect S3C2410_GPG(10) */
+		GPIO_LOOKUP("GPG", 10, "cd", GPIO_ACTIVE_LOW),
+		{ },
+	},
 };
 
 /* 7" LCD panel */
@@ -200,6 +209,7 @@  static void __init at2440evb_init_time(void)
 static void __init at2440evb_init(void)
 {
 	s3c24xx_fb_set_platdata(&at2440evb_fb_info);
+	gpiod_add_lookup_table(&at2440evb_mci_gpio_table);
 	s3c24xx_mci_set_platdata(&at2440evb_mci_pdata);
 	s3c_nand_set_platdata(&at2440evb_nand_info);
 	s3c_i2c0_set_platdata(NULL);
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index e064c73a57d3..74d6b68e91c7 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -18,6 +18,7 @@ 
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <linux/pwm.h>
@@ -459,12 +460,21 @@  static void h1940_set_mmc_power(unsigned char power_mode, unsigned short vdd)
 }
 
 static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
-	.gpio_detect   = S3C2410_GPF(5),
-	.gpio_wprotect = S3C2410_GPH(8),
 	.set_power     = h1940_set_mmc_power,
 	.ocr_avail     = MMC_VDD_32_33,
 };
 
+static struct gpiod_lookup_table h1940_mmc_gpio_table = {
+	.dev_id = "s3c2410-sdi",
+	.table = {
+		/* Card detect S3C2410_GPF(5) */
+		GPIO_LOOKUP("GPF", 5, "cd", GPIO_ACTIVE_LOW),
+		/* Write protect S3C2410_GPH(8) */
+		GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct pwm_lookup h1940_pwm_lookup[] = {
 	PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight", NULL, 36296,
 		   PWM_POLARITY_NORMAL),
@@ -680,6 +690,7 @@  static void __init h1940_init(void)
 	u32 tmp;
 
 	s3c24xx_fb_set_platdata(&h1940_fb_info);
+	gpiod_add_lookup_table(&h1940_mmc_gpio_table);
 	s3c24xx_mci_set_platdata(&h1940_mmc_cfg);
  	s3c24xx_udc_set_platdata(&h1940_udc_cfg);
 	s3c24xx_ts_set_platdata(&h1940_ts_cfg);
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 50d67d760efd..9035f868fb34 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -15,6 +15,7 @@ 
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/input.h>
 #include <linux/io.h>
 #include <linux/serial_core.h>
@@ -234,13 +235,22 @@  static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
 /* MMC/SD  */
 
 static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
-	.gpio_detect		= S3C2410_GPG(8),
-	.gpio_wprotect		= S3C2410_GPH(8),
 	.wprotect_invert	= 1,
 	.set_power		= NULL,
 	.ocr_avail		= MMC_VDD_32_33|MMC_VDD_33_34,
 };
 
+static struct gpiod_lookup_table mini2440_mmc_gpio_table = {
+	.dev_id = "s3c2410-sdi",
+	.table = {
+		/* Card detect S3C2410_GPG(8) */
+		GPIO_LOOKUP("GPG", 8, "cd", GPIO_ACTIVE_LOW),
+		/* Write protect S3C2410_GPH(8) */
+		GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 /* NAND Flash on MINI2440 board */
 
 static struct mtd_partition mini2440_default_nand_part[] __initdata = {
@@ -696,6 +706,7 @@  static void __init mini2440_init(void)
 	}
 
 	s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
+	gpiod_add_lookup_table(&mini2440_mmc_gpio_table);
 	s3c24xx_mci_set_platdata(&mini2440_mmc_cfg);
 	s3c_nand_set_platdata(&mini2440_nand_info);
 	s3c_i2c0_set_platdata(NULL);
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index eec51fadb14a..d856f23939af 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -17,6 +17,7 @@ 
 #include <linux/gpio_keys.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
@@ -350,12 +351,21 @@  static void n30_sdi_set_power(unsigned char power_mode, unsigned short vdd)
 }
 
 static struct s3c24xx_mci_pdata n30_mci_cfg __initdata = {
-	.gpio_detect	= S3C2410_GPF(1),
-	.gpio_wprotect  = S3C2410_GPG(10),
 	.ocr_avail	= MMC_VDD_32_33,
 	.set_power	= n30_sdi_set_power,
 };
 
+static struct gpiod_lookup_table n30_mci_gpio_table = {
+	.dev_id = "s3c2410-sdi",
+	.table = {
+		/* Card detect S3C2410_GPF(1) */
+		GPIO_LOOKUP("GPF", 1, "cd", GPIO_ACTIVE_LOW),
+		/* Write protect S3C2410_GPG(10) */
+		GPIO_LOOKUP("GPG", 10, "wp", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct platform_device *n30_devices[] __initdata = {
 	&s3c_device_lcd,
 	&s3c_device_wdt,
@@ -549,6 +559,7 @@  static void __init n30_init(void)
 
 	s3c24xx_fb_set_platdata(&n30_fb_info);
 	s3c24xx_udc_set_platdata(&n30_udc_cfg);
+	gpiod_add_lookup_table(&n30_mci_gpio_table);
 	s3c24xx_mci_set_platdata(&n30_mci_cfg);
 	s3c_i2c0_set_platdata(&n30_i2ccfg);
 
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 7f5a18fa305b..29f9b345a531 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -14,6 +14,7 @@ 
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
 #include <linux/serial_s3c.h>
@@ -558,12 +559,21 @@  static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd)
 }
 
 static struct s3c24xx_mci_pdata rx1950_mmc_cfg __initdata = {
-	.gpio_detect = S3C2410_GPF(5),
-	.gpio_wprotect = S3C2410_GPH(8),
 	.set_power = rx1950_set_mmc_power,
 	.ocr_avail = MMC_VDD_32_33,
 };
 
+static struct gpiod_lookup_table rx1950_mmc_gpio_table = {
+	.dev_id = "s3c2410-sdi",
+	.table = {
+		/* Card detect S3C2410_GPF(5) */
+		GPIO_LOOKUP("GPF", 5, "cd", GPIO_ACTIVE_LOW),
+		/* Write protect S3C2410_GPH(8) */
+		GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct mtd_partition rx1950_nand_part[] = {
 	[0] = {
 			.name = "Boot0",
@@ -762,6 +772,7 @@  static void __init rx1950_init_machine(void)
 	s3c24xx_fb_set_platdata(&rx1950_lcd_cfg);
 	s3c24xx_udc_set_platdata(&rx1950_udc_cfg);
 	s3c24xx_ts_set_platdata(&rx1950_ts_cfg);
+	gpiod_add_lookup_table(&rx1950_mmc_gpio_table);
 	s3c24xx_mci_set_platdata(&rx1950_mmc_cfg);
 	s3c_i2c0_set_platdata(NULL);
 	s3c_nand_set_platdata(&rx1950_nand_info);
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index f77493604312..e1811ffd7b70 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -26,7 +26,6 @@ 
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_gpio.h>
 #include <linux/mmc/slot-gpio.h>
 
 #include <plat/gpio-cfg.h>
@@ -1545,25 +1544,19 @@  static int s3cmci_probe_pdata(struct s3cmci_host *host)
 	if (pdata->wprotect_invert)
 		mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
 
-	if (pdata->detect_invert)
-		 mmc->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
-
-	if (gpio_is_valid(pdata->gpio_detect)) {
-		ret = mmc_gpio_request_cd(mmc, pdata->gpio_detect, 0);
-		if (ret) {
-			dev_err(&pdev->dev, "error requesting GPIO for CD %d\n",
-				ret);
-			return ret;
-		}
+	/* If we get -ENOENT we have no card detect GPIO line */
+	ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL);
+	if (ret != -ENOENT) {
+		dev_err(&pdev->dev, "error requesting GPIO for CD %d\n",
+			ret);
+		return ret;
 	}
 
-	if (gpio_is_valid(pdata->gpio_wprotect)) {
-		ret = mmc_gpio_request_ro(mmc, pdata->gpio_wprotect);
-		if (ret) {
-			dev_err(&pdev->dev, "error requesting GPIO for WP %d\n",
-				ret);
-			return ret;
-		}
+	ret = mmc_gpiod_request_ro(host->mmc, "wp", 0, false, 0, NULL);
+	if (ret != -ENOENT) {
+		dev_err(&pdev->dev, "error requesting GPIO for WP %d\n",
+			ret);
+		return ret;
 	}
 
 	return 0;
diff --git a/include/linux/platform_data/mmc-s3cmci.h b/include/linux/platform_data/mmc-s3cmci.h
index b68d9f0bdd9e..33310b11cbdd 100644
--- a/include/linux/platform_data/mmc-s3cmci.h
+++ b/include/linux/platform_data/mmc-s3cmci.h
@@ -7,7 +7,6 @@ 
  * @no_wprotect: Set this to indicate there is no write-protect switch.
  * @no_detect: Set this if there is no detect switch.
  * @wprotect_invert: Invert the default sense of the write protect switch.
- * @detect_invert: Invert the default sense of the write protect switch.
  * @use_dma: Set to allow the use of DMA.
  * @gpio_detect: GPIO number for the card detect line.
  * @gpio_wprotect: GPIO number for the write protect line.
@@ -31,11 +30,8 @@  struct s3c24xx_mci_pdata {
 	unsigned int	no_wprotect:1;
 	unsigned int	no_detect:1;
 	unsigned int	wprotect_invert:1;
-	unsigned int	detect_invert:1;	/* set => detect active high */
 	unsigned int	use_dma:1;
 
-	unsigned int	gpio_detect;
-	unsigned int	gpio_wprotect;
 	unsigned long	ocr_avail;
 	void		(*set_power)(unsigned char power_mode,
 				     unsigned short vdd);