[2/2] mmc: sdhci-of-esdhc: fix clock setting for different controller versions

Commit Message

Yangbo Lu Dec. 24, 2019, 8:41 a.m. UTC

This patch is to fix clock setting code for different controller
versions. Two of HW changes after vendor version 2.2 are removing
PEREN/HCKEN/IPGEN bits in system control register, and adding SD
clock stable bit in present state register. This patch cleans up
related code too.

Signed-off-by: Yangbo Lu <[e-mail]>
---
 drivers/mmc/host/sdhci-of-esdhc.c | 125 +++++++++++++++++++++-----------------
 1 file changed, 69 insertions(+), 56 deletions(-)

Patch

diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index 502e317..58d4cbe 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -562,32 +562,44 @@  static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host)
 
 static void esdhc_clock_enable(struct sdhci_host *host, bool enable)
 {
-	u32 val;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
 	ktime_t timeout;
+	u32 val, clk_en;
+
+	clk_en = ESDHC_CLOCK_SDCLKEN;
+
+	/* IPGEN/HCKEN/PEREN bits exist on eSDHC whose vendor version
+	 * is 2.2 or lower.
+	 */
+	if (esdhc->vendor_ver <= VENDOR_V_22)
+		clk_en |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN |
+			   ESDHC_CLOCK_PEREN);
 
 	val = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
 
 	if (enable)
-		val |= ESDHC_CLOCK_SDCLKEN;
+		val |= clk_en;
 	else
-		val &= ~ESDHC_CLOCK_SDCLKEN;
+		val &= ~clk_en;
 
 	sdhci_writel(host, val, ESDHC_SYSTEM_CONTROL);
 
-	/* Wait max 20 ms */
+	/* Wait max 20 ms. If vendor version is 2.2 or lower, do not
+	 * wait clock stable bit which does not exist.
+	 */
 	timeout = ktime_add_ms(ktime_get(), 20);
-	val = ESDHC_CLOCK_STABLE;
-	while  (1) {
+	while (esdhc->vendor_ver > VENDOR_V_22) {
 		bool timedout = ktime_after(ktime_get(), timeout);
 
-		if (sdhci_readl(host, ESDHC_PRSSTAT) & val)
+		if (sdhci_readl(host, ESDHC_PRSSTAT) & ESDHC_CLOCK_STABLE)
 			break;
 		if (timedout) {
 			pr_err("%s: Internal clock never stabilised.\n",
 				mmc_hostname(host->mmc));
 			break;
 		}
-		udelay(10);
+		usleep_range(10, 20);
 	}
 }
 
@@ -621,77 +633,96 @@  static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
-	int pre_div = 1;
-	int div = 1;
-	int division;
+	unsigned int pre_div = 1, div = 1;
+	unsigned int clock_fixup = 0;
 	ktime_t timeout;
-	long fixup = 0;
 	u32 temp;
 
-	host->mmc->actual_clock = 0;
-
 	if (clock == 0) {
+		host->mmc->actual_clock = 0;
 		esdhc_clock_enable(host, false);
 		return;
 	}
 
-	/* Workaround to start pre_div at 2 for VNN < VENDOR_V_23 */
+	/* Start pre_div at 2 for vendor version < 2.3. */
 	if (esdhc->vendor_ver < VENDOR_V_23)
 		pre_div = 2;
 
+	/* Fix clock value. */
 	if (host->mmc->card && mmc_card_sd(host->mmc->card) &&
-		esdhc->clk_fixup && host->mmc->ios.timing == MMC_TIMING_LEGACY)
-		fixup = esdhc->clk_fixup->sd_dflt_max_clk;
+	    esdhc->clk_fixup && host->mmc->ios.timing == MMC_TIMING_LEGACY)
+		clock_fixup = esdhc->clk_fixup->sd_dflt_max_clk;
 	else if (esdhc->clk_fixup)
-		fixup = esdhc->clk_fixup->max_clk[host->mmc->ios.timing];
-
-	if (fixup && clock > fixup)
-		clock = fixup;
+		clock_fixup = esdhc->clk_fixup->max_clk[host->mmc->ios.timing];
 
-	temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
-	temp &= ~(ESDHC_CLOCK_SDCLKEN | ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN |
-		  ESDHC_CLOCK_PEREN | ESDHC_CLOCK_MASK);
-	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
+	if (clock_fixup == 0 || clock < clock_fixup)
+		clock_fixup = clock;
 
-	while (host->max_clk / pre_div / 16 > clock && pre_div < 256)
+	/* Calculate pre_div and div. */
+	while (host->max_clk / pre_div / 16 > clock_fixup && pre_div < 256)
 		pre_div *= 2;
 
-	while (host->max_clk / pre_div / div > clock && div < 16)
+	while (host->max_clk / pre_div / div > clock_fixup && div < 16)
 		div++;
 
+	esdhc->div_ratio = pre_div * div;
+
+	/* Limit clock division for HS400 200MHz clock for quirk. */
 	if (esdhc->quirk_limited_clk_division &&
 	    clock == MMC_HS200_MAX_DTR &&
 	    (host->mmc->ios.timing == MMC_TIMING_MMC_HS400 ||
 	     host->flags & SDHCI_HS400_TUNING)) {
-		division = pre_div * div;
-		if (division <= 4) {
+		if (esdhc->div_ratio <= 4) {
 			pre_div = 4;
 			div = 1;
-		} else if (division <= 8) {
+		} else if (esdhc->div_ratio <= 8) {
 			pre_div = 4;
 			div = 2;
-		} else if (division <= 12) {
+		} else if (esdhc->div_ratio <= 12) {
 			pre_div = 4;
 			div = 3;
 		} else {
 			pr_warn("%s: using unsupported clock division.\n",
 				mmc_hostname(host->mmc));
 		}
+		esdhc->div_ratio = pre_div * div;
 	}
 
+	host->mmc->actual_clock = host->max_clk / esdhc->div_ratio;
+
 	dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
-		clock, host->max_clk / pre_div / div);
-	host->mmc->actual_clock = host->max_clk / pre_div / div;
-	esdhc->div_ratio = pre_div * div;
+		clock, host->mmc->actual_clock);
+
+	/* Set clock division into register. */
 	pre_div >>= 1;
 	div--;
 
+	esdhc_clock_enable(host, false);
+
 	temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
-	temp |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
-		| (div << ESDHC_DIVIDER_SHIFT)
-		| (pre_div << ESDHC_PREDIV_SHIFT));
+	temp &= ~ESDHC_CLOCK_MASK;
+	temp |= ((div << ESDHC_DIVIDER_SHIFT) |
+		(pre_div << ESDHC_PREDIV_SHIFT));
 	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
 
+	/* Wait max 20 ms. If vendor version is 2.2 or lower, do not
+	 * wait clock stable bit which does not exist.
+	 */
+	timeout = ktime_add_ms(ktime_get(), 20);
+	while (esdhc->vendor_ver > VENDOR_V_22) {
+		bool timedout = ktime_after(ktime_get(), timeout);
+
+		if (sdhci_readl(host, ESDHC_PRSSTAT) & ESDHC_CLOCK_STABLE)
+			break;
+		if (timedout) {
+			pr_err("%s: Internal clock never stabilised.\n",
+				mmc_hostname(host->mmc));
+			break;
+		}
+		usleep_range(10, 20);
+	}
+
+	/* Additional setting for HS400. */
 	if (host->mmc->ios.timing == MMC_TIMING_MMC_HS400 &&
 	    clock == MMC_HS200_MAX_DTR) {
 		temp = sdhci_readl(host, ESDHC_TBCTL);
@@ -711,25 +742,7 @@  static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
 		esdhc_clock_enable(host, false);
 		esdhc_flush_async_fifo(host);
 	}
-
-	/* Wait max 20 ms */
-	timeout = ktime_add_ms(ktime_get(), 20);
-	while (1) {
-		bool timedout = ktime_after(ktime_get(), timeout);
-
-		if (sdhci_readl(host, ESDHC_PRSSTAT) & ESDHC_CLOCK_STABLE)
-			break;
-		if (timedout) {
-			pr_err("%s: Internal clock never stabilised.\n",
-				mmc_hostname(host->mmc));
-			return;
-		}
-		udelay(10);
-	}
-
-	temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
-	temp |= ESDHC_CLOCK_SDCLKEN;
-	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
+	esdhc_clock_enable(host, false);
 }
 
 static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width)