Message ID | 20200408072105.422-2-yamada.masahiro@socionext.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [1/2] mmc: sdhci: move SDHCI_CAPABILITIES_1 to a more suitable place | expand |
On 8/04/20 10:21 am, Masahiro Yamada wrote: > Use FIELD_GET and FIELD_PREP to get access to the register fields. > Delete the shift macros. I used GENMASK() for touched macros. That has the side-effect of changing the constants to 64-bit on 64-bit platforms, which needs to be mentioned in the commit message. > > Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Apart from above: Acked-by: Adrian Hunter <adrian.hunter@intel.com> > --- > > drivers/mmc/host/sdhci-esdhc-imx.c | 4 +++- > drivers/mmc/host/sdhci-of-at91.c | 5 +++-- > drivers/mmc/host/sdhci-pci-core.c | 8 ++------ > drivers/mmc/host/sdhci.c | 19 +++++++------------ > drivers/mmc/host/sdhci.h | 17 ++++++----------- > 5 files changed, 21 insertions(+), 32 deletions(-) > > diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c > index 5ec8e4bf1ac7..38cd83118082 100644 > --- a/drivers/mmc/host/sdhci-esdhc-imx.c > +++ b/drivers/mmc/host/sdhci-esdhc-imx.c > @@ -8,6 +8,7 @@ > * Author: Wolfram Sang <kernel@pengutronix.de> > */ > > +#include <linux/bitfield.h> > #include <linux/io.h> > #include <linux/iopoll.h> > #include <linux/delay.h> > @@ -399,7 +400,8 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg) > val = SDHCI_SUPPORT_DDR50 | SDHCI_SUPPORT_SDR104 > | SDHCI_SUPPORT_SDR50 > | SDHCI_USE_SDR50_TUNING > - | (SDHCI_TUNING_MODE_3 << SDHCI_RETUNING_MODE_SHIFT); > + | FIELD_PREP(SDHCI_RETUNING_MODE_MASK, > + SDHCI_TUNING_MODE_3); > > if (imx_data->socdata->flags & ESDHC_FLAG_HS400) > val |= SDHCI_SUPPORT_HS400; > diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c > index c79bff5e2280..25f4e0f4f53b 100644 > --- a/drivers/mmc/host/sdhci-of-at91.c > +++ b/drivers/mmc/host/sdhci-of-at91.c > @@ -6,6 +6,7 @@ > * 2015 Ludovic Desroches <ludovic.desroches@atmel.com> > */ > > +#include <linux/bitfield.h> > #include <linux/clk.h> > #include <linux/delay.h> > #include <linux/err.h> > @@ -179,9 +180,9 @@ static int sdhci_at91_set_clks_presets(struct device *dev) > clk_mul = gck_rate / clk_base_rate - 1; > > caps0 &= ~SDHCI_CLOCK_V3_BASE_MASK; > - caps0 |= (clk_base << SDHCI_CLOCK_BASE_SHIFT) & SDHCI_CLOCK_V3_BASE_MASK; > + caps0 |= FIELD_PREP(SDHCI_CLOCK_V3_BASE_MASK, clk_base); > caps1 &= ~SDHCI_CLOCK_MUL_MASK; > - caps1 |= (clk_mul << SDHCI_CLOCK_MUL_SHIFT) & SDHCI_CLOCK_MUL_MASK; > + caps1 |= FIELD_PREP(SDHCI_CLOCK_MUL_MASK, clk_mul); > /* Set capabilities in r/w mode. */ > writel(SDMMC_CACR_KEY | SDMMC_CACR_CAPWREN, host->ioaddr + SDMMC_CACR); > writel(caps0, host->ioaddr + SDHCI_CAPABILITIES); > diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c > index 525de2454a4d..a98c9476bfc8 100644 > --- a/drivers/mmc/host/sdhci-pci-core.c > +++ b/drivers/mmc/host/sdhci-pci-core.c > @@ -249,12 +249,8 @@ static int ricoh_probe(struct sdhci_pci_chip *chip) > static int ricoh_mmc_probe_slot(struct sdhci_pci_slot *slot) > { > slot->host->caps = > - ((0x21 << SDHCI_TIMEOUT_CLK_SHIFT) > - & SDHCI_TIMEOUT_CLK_MASK) | > - > - ((0x21 << SDHCI_CLOCK_BASE_SHIFT) > - & SDHCI_CLOCK_BASE_MASK) | > - > + FIELD_PREP(SDHCI_TIMEOUT_CLK_MASK, 0x21) | > + FIELD_PREP(SDHCI_CLOCK_BASE_MASK, 0x21) | > SDHCI_TIMEOUT_CLK_UNIT | > SDHCI_CAN_VDD_330 | > SDHCI_CAN_DO_HISPD | > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c > index 3f716466fcfd..344a7e0e33fe 100644 > --- a/drivers/mmc/host/sdhci.c > +++ b/drivers/mmc/host/sdhci.c > @@ -4117,11 +4117,9 @@ int sdhci_setup_host(struct sdhci_host *host) > } > > if (host->version >= SDHCI_SPEC_300) > - host->max_clk = (host->caps & SDHCI_CLOCK_V3_BASE_MASK) > - >> SDHCI_CLOCK_BASE_SHIFT; > + host->max_clk = FIELD_GET(SDHCI_CLOCK_V3_BASE_MASK, host->caps); > else > - host->max_clk = (host->caps & SDHCI_CLOCK_BASE_MASK) > - >> SDHCI_CLOCK_BASE_SHIFT; > + host->max_clk = FIELD_GET(SDHCI_CLOCK_BASE_MASK, host->caps); > > host->max_clk *= 1000000; > if (host->max_clk == 0 || host->quirks & > @@ -4139,8 +4137,7 @@ int sdhci_setup_host(struct sdhci_host *host) > * In case of Host Controller v3.00, find out whether clock > * multiplier is supported. > */ > - host->clk_mul = (host->caps1 & SDHCI_CLOCK_MUL_MASK) >> > - SDHCI_CLOCK_MUL_SHIFT; > + host->clk_mul = FIELD_GET(SDHCI_CLOCK_MUL_MASK, host->caps1); > > /* > * In case the value in Clock Multiplier is 0, then programmable > @@ -4173,8 +4170,7 @@ int sdhci_setup_host(struct sdhci_host *host) > mmc->f_max = max_clk; > > if (!(host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) { > - host->timeout_clk = (host->caps & SDHCI_TIMEOUT_CLK_MASK) >> > - SDHCI_TIMEOUT_CLK_SHIFT; > + host->timeout_clk = FIELD_GET(SDHCI_TIMEOUT_CLK_MASK, host->caps); > > if (host->caps & SDHCI_TIMEOUT_CLK_UNIT) > host->timeout_clk *= 1000; > @@ -4326,8 +4322,8 @@ int sdhci_setup_host(struct sdhci_host *host) > mmc->caps |= MMC_CAP_DRIVER_TYPE_D; > > /* Initial value for re-tuning timer count */ > - host->tuning_count = (host->caps1 & SDHCI_RETUNING_TIMER_COUNT_MASK) >> > - SDHCI_RETUNING_TIMER_COUNT_SHIFT; > + host->tuning_count = FIELD_GET(SDHCI_RETUNING_TIMER_COUNT_MASK, > + host->caps1); > > /* > * In case Re-tuning Timer is not disabled, the actual value of > @@ -4337,8 +4333,7 @@ int sdhci_setup_host(struct sdhci_host *host) > host->tuning_count = 1 << (host->tuning_count - 1); > > /* Re-tuning mode supported by the Host Controller */ > - host->tuning_mode = (host->caps1 & SDHCI_RETUNING_MODE_MASK) >> > - SDHCI_RETUNING_MODE_SHIFT; > + host->tuning_mode = FIELD_GET(SDHCI_RETUNING_MODE_MASK, host->caps1); > > ocr_avail = 0; > > diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h > index b786b68e0302..d7f1441b0fc3 100644 > --- a/drivers/mmc/host/sdhci.h > +++ b/drivers/mmc/host/sdhci.h > @@ -200,12 +200,10 @@ > #define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000 > > #define SDHCI_CAPABILITIES 0x40 > -#define SDHCI_TIMEOUT_CLK_MASK 0x0000003F > -#define SDHCI_TIMEOUT_CLK_SHIFT 0 > +#define SDHCI_TIMEOUT_CLK_MASK GENMASK(5, 0) > #define SDHCI_TIMEOUT_CLK_UNIT 0x00000080 > -#define SDHCI_CLOCK_BASE_MASK 0x00003F00 > -#define SDHCI_CLOCK_V3_BASE_MASK 0x0000FF00 > -#define SDHCI_CLOCK_BASE_SHIFT 8 > +#define SDHCI_CLOCK_BASE_MASK GENMASK(13, 8) > +#define SDHCI_CLOCK_V3_BASE_MASK GENMASK(15, 8) > #define SDHCI_MAX_BLOCK_MASK 0x00030000 > #define SDHCI_MAX_BLOCK_SHIFT 16 > #define SDHCI_CAN_DO_8BIT 0x00040000 > @@ -227,13 +225,10 @@ > #define SDHCI_DRIVER_TYPE_A 0x00000010 > #define SDHCI_DRIVER_TYPE_C 0x00000020 > #define SDHCI_DRIVER_TYPE_D 0x00000040 > -#define SDHCI_RETUNING_TIMER_COUNT_MASK 0x00000F00 > -#define SDHCI_RETUNING_TIMER_COUNT_SHIFT 8 > +#define SDHCI_RETUNING_TIMER_COUNT_MASK GENMASK(11, 8) > #define SDHCI_USE_SDR50_TUNING 0x00002000 > -#define SDHCI_RETUNING_MODE_MASK 0x0000C000 > -#define SDHCI_RETUNING_MODE_SHIFT 14 > -#define SDHCI_CLOCK_MUL_MASK 0x00FF0000 > -#define SDHCI_CLOCK_MUL_SHIFT 16 > +#define SDHCI_RETUNING_MODE_MASK GENMASK(15, 14) > +#define SDHCI_CLOCK_MUL_MASK GENMASK(23, 16) > #define SDHCI_CAN_DO_ADMA3 0x08000000 > #define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */ > >
On Wed, 15 Apr 2020 at 11:35, Adrian Hunter <adrian.hunter@intel.com> wrote: > > On 8/04/20 10:21 am, Masahiro Yamada wrote: > > Use FIELD_GET and FIELD_PREP to get access to the register fields. > > Delete the shift macros. I used GENMASK() for touched macros. > > That has the side-effect of changing the constants to 64-bit on 64-bit > platforms, which needs to be mentioned in the commit message. > > > > > Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> > > Apart from above: > > Acked-by: Adrian Hunter <adrian.hunter@intel.com> Applied for next, by amending the changelog according to the suggestion by Adrian. Kind regards Uffe > > > --- > > > > drivers/mmc/host/sdhci-esdhc-imx.c | 4 +++- > > drivers/mmc/host/sdhci-of-at91.c | 5 +++-- > > drivers/mmc/host/sdhci-pci-core.c | 8 ++------ > > drivers/mmc/host/sdhci.c | 19 +++++++------------ > > drivers/mmc/host/sdhci.h | 17 ++++++----------- > > 5 files changed, 21 insertions(+), 32 deletions(-) > > > > diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c > > index 5ec8e4bf1ac7..38cd83118082 100644 > > --- a/drivers/mmc/host/sdhci-esdhc-imx.c > > +++ b/drivers/mmc/host/sdhci-esdhc-imx.c > > @@ -8,6 +8,7 @@ > > * Author: Wolfram Sang <kernel@pengutronix.de> > > */ > > > > +#include <linux/bitfield.h> > > #include <linux/io.h> > > #include <linux/iopoll.h> > > #include <linux/delay.h> > > @@ -399,7 +400,8 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg) > > val = SDHCI_SUPPORT_DDR50 | SDHCI_SUPPORT_SDR104 > > | SDHCI_SUPPORT_SDR50 > > | SDHCI_USE_SDR50_TUNING > > - | (SDHCI_TUNING_MODE_3 << SDHCI_RETUNING_MODE_SHIFT); > > + | FIELD_PREP(SDHCI_RETUNING_MODE_MASK, > > + SDHCI_TUNING_MODE_3); > > > > if (imx_data->socdata->flags & ESDHC_FLAG_HS400) > > val |= SDHCI_SUPPORT_HS400; > > diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c > > index c79bff5e2280..25f4e0f4f53b 100644 > > --- a/drivers/mmc/host/sdhci-of-at91.c > > +++ b/drivers/mmc/host/sdhci-of-at91.c > > @@ -6,6 +6,7 @@ > > * 2015 Ludovic Desroches <ludovic.desroches@atmel.com> > > */ > > > > +#include <linux/bitfield.h> > > #include <linux/clk.h> > > #include <linux/delay.h> > > #include <linux/err.h> > > @@ -179,9 +180,9 @@ static int sdhci_at91_set_clks_presets(struct device *dev) > > clk_mul = gck_rate / clk_base_rate - 1; > > > > caps0 &= ~SDHCI_CLOCK_V3_BASE_MASK; > > - caps0 |= (clk_base << SDHCI_CLOCK_BASE_SHIFT) & SDHCI_CLOCK_V3_BASE_MASK; > > + caps0 |= FIELD_PREP(SDHCI_CLOCK_V3_BASE_MASK, clk_base); > > caps1 &= ~SDHCI_CLOCK_MUL_MASK; > > - caps1 |= (clk_mul << SDHCI_CLOCK_MUL_SHIFT) & SDHCI_CLOCK_MUL_MASK; > > + caps1 |= FIELD_PREP(SDHCI_CLOCK_MUL_MASK, clk_mul); > > /* Set capabilities in r/w mode. */ > > writel(SDMMC_CACR_KEY | SDMMC_CACR_CAPWREN, host->ioaddr + SDMMC_CACR); > > writel(caps0, host->ioaddr + SDHCI_CAPABILITIES); > > diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c > > index 525de2454a4d..a98c9476bfc8 100644 > > --- a/drivers/mmc/host/sdhci-pci-core.c > > +++ b/drivers/mmc/host/sdhci-pci-core.c > > @@ -249,12 +249,8 @@ static int ricoh_probe(struct sdhci_pci_chip *chip) > > static int ricoh_mmc_probe_slot(struct sdhci_pci_slot *slot) > > { > > slot->host->caps = > > - ((0x21 << SDHCI_TIMEOUT_CLK_SHIFT) > > - & SDHCI_TIMEOUT_CLK_MASK) | > > - > > - ((0x21 << SDHCI_CLOCK_BASE_SHIFT) > > - & SDHCI_CLOCK_BASE_MASK) | > > - > > + FIELD_PREP(SDHCI_TIMEOUT_CLK_MASK, 0x21) | > > + FIELD_PREP(SDHCI_CLOCK_BASE_MASK, 0x21) | > > SDHCI_TIMEOUT_CLK_UNIT | > > SDHCI_CAN_VDD_330 | > > SDHCI_CAN_DO_HISPD | > > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c > > index 3f716466fcfd..344a7e0e33fe 100644 > > --- a/drivers/mmc/host/sdhci.c > > +++ b/drivers/mmc/host/sdhci.c > > @@ -4117,11 +4117,9 @@ int sdhci_setup_host(struct sdhci_host *host) > > } > > > > if (host->version >= SDHCI_SPEC_300) > > - host->max_clk = (host->caps & SDHCI_CLOCK_V3_BASE_MASK) > > - >> SDHCI_CLOCK_BASE_SHIFT; > > + host->max_clk = FIELD_GET(SDHCI_CLOCK_V3_BASE_MASK, host->caps); > > else > > - host->max_clk = (host->caps & SDHCI_CLOCK_BASE_MASK) > > - >> SDHCI_CLOCK_BASE_SHIFT; > > + host->max_clk = FIELD_GET(SDHCI_CLOCK_BASE_MASK, host->caps); > > > > host->max_clk *= 1000000; > > if (host->max_clk == 0 || host->quirks & > > @@ -4139,8 +4137,7 @@ int sdhci_setup_host(struct sdhci_host *host) > > * In case of Host Controller v3.00, find out whether clock > > * multiplier is supported. > > */ > > - host->clk_mul = (host->caps1 & SDHCI_CLOCK_MUL_MASK) >> > > - SDHCI_CLOCK_MUL_SHIFT; > > + host->clk_mul = FIELD_GET(SDHCI_CLOCK_MUL_MASK, host->caps1); > > > > /* > > * In case the value in Clock Multiplier is 0, then programmable > > @@ -4173,8 +4170,7 @@ int sdhci_setup_host(struct sdhci_host *host) > > mmc->f_max = max_clk; > > > > if (!(host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) { > > - host->timeout_clk = (host->caps & SDHCI_TIMEOUT_CLK_MASK) >> > > - SDHCI_TIMEOUT_CLK_SHIFT; > > + host->timeout_clk = FIELD_GET(SDHCI_TIMEOUT_CLK_MASK, host->caps); > > > > if (host->caps & SDHCI_TIMEOUT_CLK_UNIT) > > host->timeout_clk *= 1000; > > @@ -4326,8 +4322,8 @@ int sdhci_setup_host(struct sdhci_host *host) > > mmc->caps |= MMC_CAP_DRIVER_TYPE_D; > > > > /* Initial value for re-tuning timer count */ > > - host->tuning_count = (host->caps1 & SDHCI_RETUNING_TIMER_COUNT_MASK) >> > > - SDHCI_RETUNING_TIMER_COUNT_SHIFT; > > + host->tuning_count = FIELD_GET(SDHCI_RETUNING_TIMER_COUNT_MASK, > > + host->caps1); > > > > /* > > * In case Re-tuning Timer is not disabled, the actual value of > > @@ -4337,8 +4333,7 @@ int sdhci_setup_host(struct sdhci_host *host) > > host->tuning_count = 1 << (host->tuning_count - 1); > > > > /* Re-tuning mode supported by the Host Controller */ > > - host->tuning_mode = (host->caps1 & SDHCI_RETUNING_MODE_MASK) >> > > - SDHCI_RETUNING_MODE_SHIFT; > > + host->tuning_mode = FIELD_GET(SDHCI_RETUNING_MODE_MASK, host->caps1); > > > > ocr_avail = 0; > > > > diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h > > index b786b68e0302..d7f1441b0fc3 100644 > > --- a/drivers/mmc/host/sdhci.h > > +++ b/drivers/mmc/host/sdhci.h > > @@ -200,12 +200,10 @@ > > #define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000 > > > > #define SDHCI_CAPABILITIES 0x40 > > -#define SDHCI_TIMEOUT_CLK_MASK 0x0000003F > > -#define SDHCI_TIMEOUT_CLK_SHIFT 0 > > +#define SDHCI_TIMEOUT_CLK_MASK GENMASK(5, 0) > > #define SDHCI_TIMEOUT_CLK_UNIT 0x00000080 > > -#define SDHCI_CLOCK_BASE_MASK 0x00003F00 > > -#define SDHCI_CLOCK_V3_BASE_MASK 0x0000FF00 > > -#define SDHCI_CLOCK_BASE_SHIFT 8 > > +#define SDHCI_CLOCK_BASE_MASK GENMASK(13, 8) > > +#define SDHCI_CLOCK_V3_BASE_MASK GENMASK(15, 8) > > #define SDHCI_MAX_BLOCK_MASK 0x00030000 > > #define SDHCI_MAX_BLOCK_SHIFT 16 > > #define SDHCI_CAN_DO_8BIT 0x00040000 > > @@ -227,13 +225,10 @@ > > #define SDHCI_DRIVER_TYPE_A 0x00000010 > > #define SDHCI_DRIVER_TYPE_C 0x00000020 > > #define SDHCI_DRIVER_TYPE_D 0x00000040 > > -#define SDHCI_RETUNING_TIMER_COUNT_MASK 0x00000F00 > > -#define SDHCI_RETUNING_TIMER_COUNT_SHIFT 8 > > +#define SDHCI_RETUNING_TIMER_COUNT_MASK GENMASK(11, 8) > > #define SDHCI_USE_SDR50_TUNING 0x00002000 > > -#define SDHCI_RETUNING_MODE_MASK 0x0000C000 > > -#define SDHCI_RETUNING_MODE_SHIFT 14 > > -#define SDHCI_CLOCK_MUL_MASK 0x00FF0000 > > -#define SDHCI_CLOCK_MUL_SHIFT 16 > > +#define SDHCI_RETUNING_MODE_MASK GENMASK(15, 14) > > +#define SDHCI_CLOCK_MUL_MASK GENMASK(23, 16) > > #define SDHCI_CAN_DO_ADMA3 0x08000000 > > #define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */ > > > > >
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 5ec8e4bf1ac7..38cd83118082 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -8,6 +8,7 @@ * Author: Wolfram Sang <kernel@pengutronix.de> */ +#include <linux/bitfield.h> #include <linux/io.h> #include <linux/iopoll.h> #include <linux/delay.h> @@ -399,7 +400,8 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg) val = SDHCI_SUPPORT_DDR50 | SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 | SDHCI_USE_SDR50_TUNING - | (SDHCI_TUNING_MODE_3 << SDHCI_RETUNING_MODE_SHIFT); + | FIELD_PREP(SDHCI_RETUNING_MODE_MASK, + SDHCI_TUNING_MODE_3); if (imx_data->socdata->flags & ESDHC_FLAG_HS400) val |= SDHCI_SUPPORT_HS400; diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c index c79bff5e2280..25f4e0f4f53b 100644 --- a/drivers/mmc/host/sdhci-of-at91.c +++ b/drivers/mmc/host/sdhci-of-at91.c @@ -6,6 +6,7 @@ * 2015 Ludovic Desroches <ludovic.desroches@atmel.com> */ +#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/err.h> @@ -179,9 +180,9 @@ static int sdhci_at91_set_clks_presets(struct device *dev) clk_mul = gck_rate / clk_base_rate - 1; caps0 &= ~SDHCI_CLOCK_V3_BASE_MASK; - caps0 |= (clk_base << SDHCI_CLOCK_BASE_SHIFT) & SDHCI_CLOCK_V3_BASE_MASK; + caps0 |= FIELD_PREP(SDHCI_CLOCK_V3_BASE_MASK, clk_base); caps1 &= ~SDHCI_CLOCK_MUL_MASK; - caps1 |= (clk_mul << SDHCI_CLOCK_MUL_SHIFT) & SDHCI_CLOCK_MUL_MASK; + caps1 |= FIELD_PREP(SDHCI_CLOCK_MUL_MASK, clk_mul); /* Set capabilities in r/w mode. */ writel(SDMMC_CACR_KEY | SDMMC_CACR_CAPWREN, host->ioaddr + SDMMC_CACR); writel(caps0, host->ioaddr + SDHCI_CAPABILITIES); diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index 525de2454a4d..a98c9476bfc8 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -249,12 +249,8 @@ static int ricoh_probe(struct sdhci_pci_chip *chip) static int ricoh_mmc_probe_slot(struct sdhci_pci_slot *slot) { slot->host->caps = - ((0x21 << SDHCI_TIMEOUT_CLK_SHIFT) - & SDHCI_TIMEOUT_CLK_MASK) | - - ((0x21 << SDHCI_CLOCK_BASE_SHIFT) - & SDHCI_CLOCK_BASE_MASK) | - + FIELD_PREP(SDHCI_TIMEOUT_CLK_MASK, 0x21) | + FIELD_PREP(SDHCI_CLOCK_BASE_MASK, 0x21) | SDHCI_TIMEOUT_CLK_UNIT | SDHCI_CAN_VDD_330 | SDHCI_CAN_DO_HISPD | diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 3f716466fcfd..344a7e0e33fe 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -4117,11 +4117,9 @@ int sdhci_setup_host(struct sdhci_host *host) } if (host->version >= SDHCI_SPEC_300) - host->max_clk = (host->caps & SDHCI_CLOCK_V3_BASE_MASK) - >> SDHCI_CLOCK_BASE_SHIFT; + host->max_clk = FIELD_GET(SDHCI_CLOCK_V3_BASE_MASK, host->caps); else - host->max_clk = (host->caps & SDHCI_CLOCK_BASE_MASK) - >> SDHCI_CLOCK_BASE_SHIFT; + host->max_clk = FIELD_GET(SDHCI_CLOCK_BASE_MASK, host->caps); host->max_clk *= 1000000; if (host->max_clk == 0 || host->quirks & @@ -4139,8 +4137,7 @@ int sdhci_setup_host(struct sdhci_host *host) * In case of Host Controller v3.00, find out whether clock * multiplier is supported. */ - host->clk_mul = (host->caps1 & SDHCI_CLOCK_MUL_MASK) >> - SDHCI_CLOCK_MUL_SHIFT; + host->clk_mul = FIELD_GET(SDHCI_CLOCK_MUL_MASK, host->caps1); /* * In case the value in Clock Multiplier is 0, then programmable @@ -4173,8 +4170,7 @@ int sdhci_setup_host(struct sdhci_host *host) mmc->f_max = max_clk; if (!(host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) { - host->timeout_clk = (host->caps & SDHCI_TIMEOUT_CLK_MASK) >> - SDHCI_TIMEOUT_CLK_SHIFT; + host->timeout_clk = FIELD_GET(SDHCI_TIMEOUT_CLK_MASK, host->caps); if (host->caps & SDHCI_TIMEOUT_CLK_UNIT) host->timeout_clk *= 1000; @@ -4326,8 +4322,8 @@ int sdhci_setup_host(struct sdhci_host *host) mmc->caps |= MMC_CAP_DRIVER_TYPE_D; /* Initial value for re-tuning timer count */ - host->tuning_count = (host->caps1 & SDHCI_RETUNING_TIMER_COUNT_MASK) >> - SDHCI_RETUNING_TIMER_COUNT_SHIFT; + host->tuning_count = FIELD_GET(SDHCI_RETUNING_TIMER_COUNT_MASK, + host->caps1); /* * In case Re-tuning Timer is not disabled, the actual value of @@ -4337,8 +4333,7 @@ int sdhci_setup_host(struct sdhci_host *host) host->tuning_count = 1 << (host->tuning_count - 1); /* Re-tuning mode supported by the Host Controller */ - host->tuning_mode = (host->caps1 & SDHCI_RETUNING_MODE_MASK) >> - SDHCI_RETUNING_MODE_SHIFT; + host->tuning_mode = FIELD_GET(SDHCI_RETUNING_MODE_MASK, host->caps1); ocr_avail = 0; diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index b786b68e0302..d7f1441b0fc3 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -200,12 +200,10 @@ #define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000 #define SDHCI_CAPABILITIES 0x40 -#define SDHCI_TIMEOUT_CLK_MASK 0x0000003F -#define SDHCI_TIMEOUT_CLK_SHIFT 0 +#define SDHCI_TIMEOUT_CLK_MASK GENMASK(5, 0) #define SDHCI_TIMEOUT_CLK_UNIT 0x00000080 -#define SDHCI_CLOCK_BASE_MASK 0x00003F00 -#define SDHCI_CLOCK_V3_BASE_MASK 0x0000FF00 -#define SDHCI_CLOCK_BASE_SHIFT 8 +#define SDHCI_CLOCK_BASE_MASK GENMASK(13, 8) +#define SDHCI_CLOCK_V3_BASE_MASK GENMASK(15, 8) #define SDHCI_MAX_BLOCK_MASK 0x00030000 #define SDHCI_MAX_BLOCK_SHIFT 16 #define SDHCI_CAN_DO_8BIT 0x00040000 @@ -227,13 +225,10 @@ #define SDHCI_DRIVER_TYPE_A 0x00000010 #define SDHCI_DRIVER_TYPE_C 0x00000020 #define SDHCI_DRIVER_TYPE_D 0x00000040 -#define SDHCI_RETUNING_TIMER_COUNT_MASK 0x00000F00 -#define SDHCI_RETUNING_TIMER_COUNT_SHIFT 8 +#define SDHCI_RETUNING_TIMER_COUNT_MASK GENMASK(11, 8) #define SDHCI_USE_SDR50_TUNING 0x00002000 -#define SDHCI_RETUNING_MODE_MASK 0x0000C000 -#define SDHCI_RETUNING_MODE_SHIFT 14 -#define SDHCI_CLOCK_MUL_MASK 0x00FF0000 -#define SDHCI_CLOCK_MUL_SHIFT 16 +#define SDHCI_RETUNING_MODE_MASK GENMASK(15, 14) +#define SDHCI_CLOCK_MUL_MASK GENMASK(23, 16) #define SDHCI_CAN_DO_ADMA3 0x08000000 #define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */
Use FIELD_GET and FIELD_PREP to get access to the register fields. Delete the shift macros. I used GENMASK() for touched macros. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- drivers/mmc/host/sdhci-esdhc-imx.c | 4 +++- drivers/mmc/host/sdhci-of-at91.c | 5 +++-- drivers/mmc/host/sdhci-pci-core.c | 8 ++------ drivers/mmc/host/sdhci.c | 19 +++++++------------ drivers/mmc/host/sdhci.h | 17 ++++++----------- 5 files changed, 21 insertions(+), 32 deletions(-)