From patchwork Fri Jul 10 11:08:48 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ben Chuang X-Patchwork-Id: 11656259 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id A4280618 for ; Fri, 10 Jul 2020 11:08:08 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 707CC2078B for ; Fri, 10 Jul 2020 11:08:08 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="bIxqegoo" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727955AbgGJLIH (ORCPT ); Fri, 10 Jul 2020 07:08:07 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:40938 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726725AbgGJLIG (ORCPT ); Fri, 10 Jul 2020 07:08:06 -0400 Received: from mail-pl1-x642.google.com (mail-pl1-x642.google.com [IPv6:2607:f8b0:4864:20::642]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id DBBB7C08C5CE; Fri, 10 Jul 2020 04:08:05 -0700 (PDT) Received: by mail-pl1-x642.google.com with SMTP id x8so2107633plm.10; Fri, 10 Jul 2020 04:08:05 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=vfUx15GR7O9nIZG475DM65r/5oMnn9qDrYaUxktKuL4=; b=bIxqegooV1M02fhdbgORJPbQq6Lj78R12LLQWFm91KtvLyN7UpKI4ilpKgysOccyzJ tPBR55xQElA4IlDMMbsf2flS2o2/vthjKOM7fOtIAiSHpni3YPC1U6Cw4yLpRjnIphGQ unwXXJA8zM9bah8rMjqMxCZTgkZunvA+0v/LzRlC6ctbU9k0eRELq8BTldDz1qd3xKLH 9CN6zqye+vsTFkxNS0tKAU1pTSDVCsTeH5wiZOnbOV07llq60KOCnnTtXdmVlSyR9q2+ x7khLrGZHRnAfPyb8oSOEgoPoVpAvPJlL34H13/Kcya2RHBf85guJTyLNsWTAo8I8qlo uASg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=vfUx15GR7O9nIZG475DM65r/5oMnn9qDrYaUxktKuL4=; b=JmX1wzDlVPtAcw3hb1bdMyRj2lXl1Oa//odUuRs8WsN7vSjlKZDu0/Zybr5pbrBmO7 Ze0cNmBspdI44wLBsZqS+v/Ha5YGXU/hbuNeBIkrUWlRVqFvTlA7h5j6IuUfITYGxDg0 zxbg09CKw3FFBPvt001eU746yVX2dLmxh8WfQ5QDQ84fYUBXoJ+wm/cyAK6SPT8CKI+g ZGCbH9aKiWCGcp7kx4FgOxZyWnBJ4XpDSvnXyPVlFxL3+Sqc+PNhS1N0w7tQcuTRmocA x+A0K1Gl7iBAlU3VVyB1GtRtCUc4sC2T79OQE5K3WyZd0qq4Lk8ByKHHrMYATx+HzhUa 7KfQ== X-Gm-Message-State: AOAM530Mq6PX6vrxnocfcDhpSYSctCqEnv/2D5Dh54gicCvlXBFBoEE9 EsYBQxRXDi4qxYP+v4WLLHb9X52r X-Google-Smtp-Source: ABdhPJw0zey3vGrBHyilPwk4ImIvbzkvVYjqzJcGJVMSd/IQnCPTa2vSekMR1GvFX6PRZFOBfjvtaw== X-Received: by 2002:a17:90a:fc90:: with SMTP id ci16mr4908652pjb.1.1594379285131; Fri, 10 Jul 2020 04:08:05 -0700 (PDT) Received: from gli-arch.genesyslogic.com.tw (60-251-58-169.HINET-IP.hinet.net. [60.251.58.169]) by smtp.gmail.com with ESMTPSA id f14sm5336890pjq.36.2020.07.10.04.08.03 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 10 Jul 2020 04:08:04 -0700 (PDT) From: Ben Chuang To: adrian.hunter@intel.com, ulf.hansson@linaro.org Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org, ben.chuang@genesyslogic.com.tw, takahiro.akashi@linaro.org, greg.tu@genesyslogic.com.tw, Ben Chuang Subject: [RFC PATCH V3 04/21] mmc: core: UHS-II support, try to select UHS-II interface Date: Fri, 10 Jul 2020 19:08:48 +0800 Message-Id: <20200710110848.29114-1-benchuanggli@gmail.com> X-Mailer: git-send-email 2.27.0 MIME-Version: 1.0 Sender: linux-mmc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org From: Ben Chuang The flow of "interface selection and initialization" was a bit modified for UHS-II card. This commit follows the sequence defined in SD specification (Part 1). See section 7.2.3 in "UHS-II Simplified Addendum." Signed-off-by: Ben Chuang Signed-off-by: AKASHI Takahiro --- drivers/mmc/core/Makefile | 2 +- drivers/mmc/core/bus.c | 5 +- drivers/mmc/core/core.c | 33 +- drivers/mmc/core/sd.c | 26 ++ drivers/mmc/core/uhs2.c | 800 ++++++++++++++++++++++++++++++++++++++ drivers/mmc/core/uhs2.h | 20 + 6 files changed, 882 insertions(+), 4 deletions(-) create mode 100644 drivers/mmc/core/uhs2.c create mode 100644 drivers/mmc/core/uhs2.h diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile index 95ffe008ebdf..e2a90dc98afc 100644 --- a/drivers/mmc/core/Makefile +++ b/drivers/mmc/core/Makefile @@ -8,7 +8,7 @@ mmc_core-y := core.o bus.o host.o \ mmc.o mmc_ops.o sd.o sd_ops.o \ sdio.o sdio_ops.o sdio_bus.o \ sdio_cis.o sdio_io.o sdio_irq.o \ - slot-gpio.o regulator.o + slot-gpio.o regulator.o uhs2.o mmc_core-$(CONFIG_OF) += pwrseq.o obj-$(CONFIG_PWRSEQ_SIMPLE) += pwrseq_simple.o obj-$(CONFIG_PWRSEQ_SD8787) += pwrseq_sd8787.o diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index 70207f11a654..66d3e942f3fc 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -350,8 +350,9 @@ int mmc_add_card(struct mmc_card *card) } else { pr_info("%s: new %s%s%s%s%s%s card at address %04x\n", mmc_hostname(card->host), - mmc_card_uhs(card) ? "ultra high speed " : - (mmc_card_hs(card) ? "high speed " : ""), + mmc_card_uhs2(card) ? "ultra high speed 2 " : + (mmc_card_uhs(card) ? "ultra high speed 1 " : + (mmc_card_hs(card) ? "high speed " : "")), mmc_card_hs400(card) ? "HS400 " : (mmc_card_hs200(card) ? "HS200 " : ""), mmc_card_hs400es(card) ? "Enhanced strobe " : "", diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index c6540d56646b..e2534f3446ce 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -31,6 +31,7 @@ #include #include #include +#include #define CREATE_TRACE_POINTS #include @@ -41,6 +42,7 @@ #include "host.h" #include "sdio_bus.h" #include "pwrseq.h" +#include "uhs2.h" #include "mmc_ops.h" #include "sd_ops.h" @@ -51,6 +53,7 @@ #define SD_DISCARD_TIMEOUT_MS (250) static const unsigned freqs[] = { 400000, 300000, 200000, 100000 }; +static const unsigned int uhs2_freqs[] = { 52000000, 26000000 }; /* * Enabling software CRCs on the data blocks can be a significant (30%) @@ -2165,9 +2168,10 @@ static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq) if (!mmc_attach_sdio(host)) return 0; - if (!(host->caps2 & MMC_CAP2_NO_SD)) + if (!(host->caps2 & MMC_CAP2_NO_SD)) { if (!mmc_attach_sd(host)) return 0; + } if (!(host->caps2 & MMC_CAP2_NO_MMC)) if (!mmc_attach_mmc(host)) @@ -2300,6 +2304,33 @@ void mmc_rescan(struct work_struct *work) goto out; } + if (host->caps & MMC_CAP_UHS2) { + /* + * Start to try UHS-II initialization from 52MHz to 26MHz + * (RCLK range) per spec. + */ + for (i = 0; i < ARRAY_SIZE(uhs2_freqs); i++) { + unsigned int freq = uhs2_freqs[i]; + int err; + + err = mmc_uhs2_rescan_try_freq(host, + max(freq, host->f_min)); + if (!err) { + mmc_release_host(host); + goto out; + } + + if (err == UHS2_PHY_INIT_ERR) + /* UHS2 IF detect or Lane Sync error. + * Try legacy interface. + */ + break; + + if (freq <= host->f_min) + break; + } + } + for (i = 0; i < ARRAY_SIZE(freqs); i++) { unsigned int freq = freqs[i]; if (freq > host->f_max) { diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 5a2210c25aa7..c5b071bd98b3 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -901,6 +901,20 @@ int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card, err = mmc_read_switch(card); if (err) return err; + if (host->flags & MMC_UHS2_INITIALIZED) { + u8 status[64]; + /* + * send CMD6 to set Maximum Power Consumption + * to get better performance + */ + err = mmc_sd_switch(card, 0, 3, + SD_SET_CURRENT_LIMIT_1000, status); + if (!err) { + err = mmc_sd_switch(card, 1, 3, + SD_SET_CURRENT_LIMIT_1000, + status); + } + } } /* @@ -1043,6 +1057,11 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, if (err) goto free_card; + /* For UHS2, skip the UHS-I initialization. */ + if ((host->flags & MMC_UHS2_SUPPORT) && + (host->flags & MMC_UHS2_INITIALIZED)) + goto done; + /* * If the card has not been power cycled, it may still be using 1.8V * signaling. Detect that situation and try to initialize a UHS-I (1.8V) @@ -1334,6 +1353,13 @@ int mmc_attach_sd(struct mmc_host *host) rocr = mmc_select_voltage(host, ocr); + /* + * Some cards have zero value of rocr in UHS-II mode. Assign host's ocr + * value to rocr. + */ + if ((host->flags & MMC_UHS2_INITIALIZED) && !rocr) + rocr = host->ocr_avail; + /* * Can we support the voltage(s) of the card(s)? */ diff --git a/drivers/mmc/core/uhs2.c b/drivers/mmc/core/uhs2.c new file mode 100644 index 000000000000..a3b20ac6f315 --- /dev/null +++ b/drivers/mmc/core/uhs2.c @@ -0,0 +1,800 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * linux/drivers/mmc/core/uhs2.c - UHS-II driver + * + * Copyright (C) 2014 Intel Corp, All Rights Reserved. + * Copyright (C) 2020 Genesys Logic, Inc. + * Authors: Ben Chuang + * Copyright (C) 2020 Linaro Limited + * Author: AKASHI Takahiro + */ + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "uhs2.h" +#include "mmc_ops.h" +#include "sd_ops.h" +#include "core.h" + +#define DBG(f, x...) \ + pr_warn("[%s()]: " f, __func__, ## x) + +/** + * uhs2_cmd_assemble - assemble and build up uhs2 command + * @cmd: MMC command + * @uhs2_cmd: UHS2 command + * @header: Value of packet header + * @arg: Argument of packet + * @payload: Payload of packet + * @plen: Payload length + * @resp: Buffer for response + * @resp_len: Response buffer length + * + * resp is inputted outside which should be a variable created by caller + * so caller should handle it. For SD command, there is no uhs2_resp and + * response should be stored in resp of mmc_command. + */ +static void uhs2_cmd_assemble(struct mmc_command *cmd, + struct uhs2_command *uhs2_cmd, + u16 header, u16 arg, + u32 *payload, u8 plen, u8 *resp, u8 resp_len) +{ + uhs2_cmd->header = header; + uhs2_cmd->arg = arg; + uhs2_cmd->payload = payload; + uhs2_cmd->payload_len = plen * sizeof(u32); + uhs2_cmd->packet_len = uhs2_cmd->payload_len + 4; + + cmd->uhs2_cmd = uhs2_cmd; + cmd->uhs2_resp = resp; + cmd->uhs2_resp_len = resp_len; + + pr_debug("%s: uhs2_cmd: header=0x%x arg=0x%x\n", + __func__, uhs2_cmd->header, uhs2_cmd->arg); + pr_debug("%s: payload_len=%d packet_len=%d resp_len=%d\n", + __func__, uhs2_cmd->payload_len, uhs2_cmd->packet_len, + cmd->uhs2_resp_len); +} + +static int uhs2_dev_init(struct mmc_host *host) +{ + struct mmc_command cmd = {0}; + struct uhs2_command uhs2_cmd = {}; + u32 cnt; + u32 dap, gap, gap1; + u16 header = 0, arg = 0; + u32 payload[1]; + u8 plen = 1; + u8 gd = 0, cf = 1; + u8 resp[6] = {0}; + u8 resp_len = 6; + int err; + + dap = host->uhs2_caps.dap; + gap = host->uhs2_caps.gap; + + header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD; + arg = ((UHS2_DEV_CMD_DEVICE_INIT & 0xFF) << 8) | + UHS2_NATIVE_CMD_WRITE | + UHS2_NATIVE_CMD_PLEN_4B | + (UHS2_DEV_CMD_DEVICE_INIT >> 8); + + /* need this for some cards */ + cmd.busy_timeout = 1000; + + for (cnt = 0; cnt < 30; cnt++) { + payload[0] = ((dap & 0xF) << 12) | + (cf << 11) | + ((gd & 0xF) << 4) | + (gap & 0xF); + + uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, + payload, plen, resp, resp_len); + + DBG("Begin DEVICE_INIT, header=0x%x, arg=0x%x, payload=0x%x.\n", + header, arg, payload[0]); + + DBG("Sending DEVICE_INIT. Count = %d\n", cnt); + err = mmc_wait_for_cmd(host, &cmd, 0); + + if (err) { + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n", + mmc_hostname(host), __func__, err); + return -EIO; + } + + if (IS_ENABLED(CONFIG_MMC_DEBUG)) { + int i; + + pr_warn("%s: DEVICE_INIT response is: ", + mmc_hostname(host)); + for (i = 0; i < resp_len; i++) + pr_warn("0x%x ", resp[i]); + pr_warn("\n"); + } + + if (resp[3] != (UHS2_DEV_CMD_DEVICE_INIT & 0xFF)) { + pr_err("%s: DEVICE_INIT response is wrong!\n", + mmc_hostname(host)); + return -EIO; + } + + if (resp[5] & 0x8) { + DBG("CF is set, device is initialized!\n"); + host->group_desc = gd; + break; + } + gap1 = resp[4] & 0x0F; + if (gap == gap1) + gd++; + } + if (cnt == 30) { + pr_err("%s: DEVICE_INIT fail, already 30 times!\n", + mmc_hostname(host)); + return -EIO; + } + + return 0; +} + +static int uhs2_enum(struct mmc_host *host) +{ + struct mmc_command cmd = {0}; + struct uhs2_command uhs2_cmd = {}; + u16 header = 0, arg = 0; + u32 payload[1]; + u8 plen = 1; + u8 id_f = 0xF, id_l = 0x0; + u8 resp[8] = {0}; + u8 resp_len = 8; + int err; + + header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD; + arg = ((UHS2_DEV_CMD_ENUMERATE & 0xFF) << 8) | + UHS2_NATIVE_CMD_WRITE | + UHS2_NATIVE_CMD_PLEN_4B | + (UHS2_DEV_CMD_ENUMERATE >> 8); + + payload[0] = (id_f << 4) | id_l; + + DBG("Begin ENUMERATE, header=0x%x, arg=0x%x, payload=0x%x.\n", + header, arg, payload[0]); + uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, plen, + resp, resp_len); + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) { + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n", + mmc_hostname(host), __func__, err); + return -EIO; + } + + if (IS_ENABLED(CONFIG_MMC_DEBUG)) { + int i; + + pr_warn("%s: ENUMERATE response is: ", mmc_hostname(host)); + for (i = 0; i < resp_len; i++) + pr_warn("0x%x ", resp[i]); + pr_warn("\n"); + } + + if (resp[3] != (UHS2_DEV_CMD_ENUMERATE & 0xFF)) { + pr_err("%s: ENUMERATE response is wrong!\n", + mmc_hostname(host)); + return -EIO; + } + + id_f = (resp[4] >> 4) & 0xF; + id_l = resp[4] & 0xF; + DBG("id_f = %d, id_l = %d.\n", id_f, id_l); + DBG("Enumerate Cmd Completed. No. of Devices connected = %d\n", + id_l - id_f + 1); + host->uhs2_dev_prop.node_id = id_f; + + return 0; +} + +static int uhs2_config_read(struct mmc_host *host) +{ + struct mmc_command cmd = {0}; + struct uhs2_command uhs2_cmd = {}; + u16 header = 0, arg = 0; + u32 cap; + int err; + + DBG("INQUIRY_CFG: read Generic Caps.\n"); + header = UHS2_NATIVE_PACKET | + UHS2_PACKET_TYPE_CCMD | + host->uhs2_dev_prop.node_id; + arg = ((UHS2_DEV_CONFIG_GEN_CAPS & 0xFF) << 8) | + UHS2_NATIVE_CMD_READ | + UHS2_NATIVE_CMD_PLEN_4B | + (UHS2_DEV_CONFIG_GEN_CAPS >> 8); + + DBG("Begin INQUIRY_CFG, header=0x%x, arg=0x%x.\n", + header, arg); + /* There is no payload because per spec, there should be + * no payload field for read CCMD. + * Plen is set in arg. Per spec, plen for read CCMD + * represents the len of read data which is assigned in payload + * of following RES (p136). + */ + uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0); + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) { + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n", + mmc_hostname(host), __func__, err); + return -EIO; + } + + if (IS_ENABLED(CONFIG_MMC_DEBUG)) { + int i; + + pr_warn("%s: INQUIRY_CFG generic response is: ", + mmc_hostname(host)); + for (i = 0; i < 2; i++) + pr_warn("0x%x ", cmd.resp[i]); + pr_warn("\n"); + } + + cap = cmd.resp[0]; + DBG("Device Generic Caps (0-31) is: 0x%x.\n", cap); + host->uhs2_dev_prop.n_lanes = (cap >> UHS2_DEV_CONFIG_N_LANES_POS) & + UHS2_DEV_CONFIG_N_LANES_MASK; + host->uhs2_dev_prop.dadr_len = (cap >> UHS2_DEV_CONFIG_DADR_POS) & + UHS2_DEV_CONFIG_DADR_MASK; + host->uhs2_dev_prop.app_type = (cap >> UHS2_DEV_CONFIG_APP_POS) & + UHS2_DEV_CONFIG_APP_MASK; + + DBG("INQUIRY_CFG: read PHY Caps.\n"); + arg = ((UHS2_DEV_CONFIG_PHY_CAPS & 0xFF) << 8) | + UHS2_NATIVE_CMD_READ | + UHS2_NATIVE_CMD_PLEN_8B | + (UHS2_DEV_CONFIG_PHY_CAPS >> 8); + + DBG("Begin INQUIRY_CFG, header=0x%x, arg=0x%x.\n", + header, arg); + uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0); + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) { + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n", + mmc_hostname(host), __func__, err); + return -EIO; + } + + if (IS_ENABLED(CONFIG_MMC_DEBUG)) { + int i; + + pr_warn("%s: INQUIRY_CFG PHY response is: ", + mmc_hostname(host)); + for (i = 0; i < 2; i++) + pr_warn("0x%x ", cmd.resp[i]); + pr_warn("\n"); + } + + cap = cmd.resp[0]; + DBG("Device PHY Caps (0-31) is: 0x%x.\n", cap); + host->uhs2_dev_prop.phy_minor_rev = cap & + UHS2_DEV_CONFIG_PHY_MINOR_MASK; + host->uhs2_dev_prop.phy_major_rev = (cap >> + UHS2_DEV_CONFIG_PHY_MAJOR_POS) & + UHS2_DEV_CONFIG_PHY_MAJOR_MASK; + host->uhs2_dev_prop.can_hibernate = (cap >> + UHS2_DEV_CONFIG_CAN_HIBER_POS) & + UHS2_DEV_CONFIG_CAN_HIBER_MASK; + + cap = cmd.resp[1]; + DBG("Device PHY Caps (32-63) is: 0x%x.\n", cap); + host->uhs2_dev_prop.n_lss_sync = cap & UHS2_DEV_CONFIG_N_LSS_SYN_MASK; + host->uhs2_dev_prop.n_lss_dir = (cap >> + UHS2_DEV_CONFIG_N_LSS_DIR_POS) & + UHS2_DEV_CONFIG_N_LSS_DIR_MASK; + if (host->uhs2_dev_prop.n_lss_sync == 0) + host->uhs2_dev_prop.n_lss_sync = 16 << 2; + else + host->uhs2_dev_prop.n_lss_sync <<= 2; + + if (host->uhs2_dev_prop.n_lss_dir == 0) + host->uhs2_dev_prop.n_lss_dir = 16 << 3; + else + host->uhs2_dev_prop.n_lss_dir <<= 3; + + DBG("INQUIRY_CFG: read LINK-TRAN Caps.\n"); + arg = ((UHS2_DEV_CONFIG_LINK_TRAN_CAPS & 0xFF) << 8) | + UHS2_NATIVE_CMD_READ | + UHS2_NATIVE_CMD_PLEN_8B | + (UHS2_DEV_CONFIG_LINK_TRAN_CAPS >> 8); + + DBG("Begin INQUIRY_CFG, header=0x%x, arg=0x%x.\n", + header, arg); + uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0); + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) { + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n", + mmc_hostname(host), __func__, err); + return -EIO; + } + + if (IS_ENABLED(CONFIG_MMC_DEBUG)) { + int i; + + pr_warn("%s: INQUIRY_CFG Link-Tran response is: ", + mmc_hostname(host)); + for (i = 0; i < 2; i++) + pr_warn("0x%x ", cmd.resp[i]); + pr_warn("\n"); + } + + cap = cmd.resp[0]; + DBG("Device LINK-TRAN Caps (0-31) is: 0x%x.\n", cap); + host->uhs2_dev_prop.link_minor_rev = cap & + UHS2_DEV_CONFIG_LT_MINOR_MASK; + host->uhs2_dev_prop.link_major_rev = (cap >> + UHS2_DEV_CONFIG_LT_MAJOR_POS) & + UHS2_DEV_CONFIG_LT_MAJOR_MASK; + host->uhs2_dev_prop.n_fcu = (cap >> UHS2_DEV_CONFIG_N_FCU_POS) & + UHS2_DEV_CONFIG_N_FCU_MASK; + host->uhs2_dev_prop.dev_type = (cap >> UHS2_DEV_CONFIG_DEV_TYPE_POS) & + UHS2_DEV_CONFIG_DEV_TYPE_MASK; + host->uhs2_dev_prop.maxblk_len = (cap >> + UHS2_DEV_CONFIG_MAX_BLK_LEN_POS) & + UHS2_DEV_CONFIG_MAX_BLK_LEN_MASK; + + cap = cmd.resp[1]; + DBG("Device LINK-TRAN Caps (32-63) is: 0x%x.\n", cap); + host->uhs2_dev_prop.n_data_gap = cap & UHS2_DEV_CONFIG_N_DATA_GAP_MASK; + if (host->uhs2_dev_prop.n_fcu == 0) + host->uhs2_dev_prop.n_fcu = 256; + + return 0; +} + +static int uhs2_config_write(struct mmc_host *host) +{ + struct mmc_command cmd = {0}; + struct uhs2_command uhs2_cmd = {}; + u16 header = 0, arg = 0; + u32 nTry; + u32 payload[2]; + u8 nMinDataGap; + u8 plen; + int err; + u8 resp[5] = {0}; + u8 resp_len = 5; + /* + * must long enough for RECV_SW_DIR == 2; + * need lss_dir at least 4 for GL9755 device + * max compitable g_lss_dir = 0 + */ + u32 g_lss_dir = 0; + + DBG("SET_COMMON_CFG: write Generic Settings.\n"); + header = UHS2_NATIVE_PACKET | + UHS2_PACKET_TYPE_CCMD | host->uhs2_dev_prop.node_id; + arg = ((UHS2_DEV_CONFIG_GEN_SET & 0xFF) << 8) | + UHS2_NATIVE_CMD_WRITE | + UHS2_NATIVE_CMD_PLEN_8B | + (UHS2_DEV_CONFIG_GEN_SET >> 8); + + if (host->uhs2_dev_prop.n_lanes == UHS2_DEV_CONFIG_2L_HD_FD && + host->uhs2_caps.n_lanes == UHS2_DEV_CONFIG_2L_HD_FD) { + /* Support HD */ + DBG("Both Host and device support 2L-HD.\n"); + host->flags |= MMC_UHS2_2L_HD; + host->uhs2_caps.n_lanes_set = UHS2_DEV_CONFIG_GEN_SET_2L_FD_HD; + host->uhs2_dev_prop.n_lanes_set = + UHS2_DEV_CONFIG_GEN_SET_2L_FD_HD; + nMinDataGap = 1; + } else { + /* Only support 2L-FD so far */ + host->flags &= ~MMC_UHS2_2L_HD; + host->uhs2_caps.n_lanes_set = UHS2_DEV_CONFIG_GEN_SET_2L_FD_HD; + host->uhs2_dev_prop.n_lanes_set = + UHS2_DEV_CONFIG_GEN_SET_2L_FD_HD; + nMinDataGap = 3; + } + + plen = 2; + payload[0] = host->uhs2_dev_prop.n_lanes_set << + UHS2_DEV_CONFIG_N_LANES_POS; + payload[1] = 0; + payload[0] = cpu_to_be32(payload[0]); + payload[1] = cpu_to_be32(payload[1]); + + DBG("Begin SET_COMMON_CFG, header=0x%x, arg=0x%x\n", header, arg); + DBG("UHS2 write Generic Settings %08x %08x\n", + payload[0], payload[1]); + DBG("flags=%08x dev_prop.n_lanes_set=%x host_caps.n_lanes_set=%x\n", + host->flags, + host->uhs2_dev_prop.n_lanes_set, + host->uhs2_caps.n_lanes_set); + + /* + * There is no payload because per spec, there should be + * no payload field for read CCMD. + * Plen is set in arg. Per spec, plen for read CCMD + * represents the len of read data which is assigned in payload + * of following RES (p136). + */ + uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, plen, NULL, 0); + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) { + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n", + mmc_hostname(host), __func__, err); + return -EIO; + } + + DBG("SET_COMMON_CFG: PHY Settings.\n"); + arg = ((UHS2_DEV_CONFIG_PHY_SET & 0xFF) << 8) | + UHS2_NATIVE_CMD_WRITE | + UHS2_NATIVE_CMD_PLEN_8B | + (UHS2_DEV_CONFIG_PHY_SET >> 8); + + for (nTry = 0; nTry < 2; nTry++) { + plen = 2; + + if (host->uhs2_caps.speed_range == + UHS2_DEV_CONFIG_PHY_SET_SPEED_B) { + host->flags |= MMC_UHS2_SPEED_B; + host->uhs2_dev_prop.speed_range_set = + UHS2_DEV_CONFIG_PHY_SET_SPEED_B; + DBG("set dev_prop.speed_range_set to SPEED_B\n"); + } else { + host->uhs2_dev_prop.speed_range_set = + UHS2_DEV_CONFIG_PHY_SET_SPEED_A; + host->flags &= ~MMC_UHS2_SPEED_B; + DBG("set dev_prop.speed_range_set to SPEED_A\n"); + } + + payload[0] = host->uhs2_dev_prop.speed_range_set << + UHS2_DEV_CONFIG_PHY_SET_SPEED_POS; + + host->uhs2_dev_prop.n_lss_sync_set = + (min(host->uhs2_dev_prop.n_lss_sync, + host->uhs2_caps.n_lss_sync) >> 2) & + UHS2_DEV_CONFIG_N_LSS_SYN_MASK; + host->uhs2_caps.n_lss_sync_set = + host->uhs2_dev_prop.n_lss_sync_set; + + if (nTry) { + host->uhs2_dev_prop.n_lss_dir_set = + (max(host->uhs2_dev_prop.n_lss_dir, + host->uhs2_caps.n_lss_dir) >> 3) & + UHS2_DEV_CONFIG_N_LSS_DIR_MASK; + host->uhs2_caps.n_lss_dir_set = + host->uhs2_dev_prop.n_lss_dir_set; + payload[1] = (host->uhs2_dev_prop.n_lss_dir_set << + UHS2_DEV_CONFIG_N_LSS_DIR_POS) | + host->uhs2_dev_prop.n_lss_sync_set; + } else { + host->uhs2_caps.n_lss_dir_set = + (host->uhs2_dev_prop.n_lss_dir >> 3) & + UHS2_DEV_CONFIG_N_LSS_DIR_MASK; + host->uhs2_dev_prop.n_lss_dir_set = + ((host->uhs2_caps.n_lss_dir >> 3) + 1) & + UHS2_DEV_CONFIG_N_LSS_DIR_MASK; + } + + if (!g_lss_dir) { + host->uhs2_dev_prop.n_lss_dir_set = 0; + } else { + host->uhs2_dev_prop.n_lss_dir_set = + max((u8)g_lss_dir, + host->uhs2_dev_prop.n_lss_dir_set); + } + + payload[1] = (host->uhs2_dev_prop.n_lss_dir_set << + UHS2_DEV_CONFIG_N_LSS_DIR_POS) | + host->uhs2_dev_prop.n_lss_sync_set; + payload[0] = cpu_to_be32(payload[0]); + payload[1] = cpu_to_be32(payload[1]); + + DBG("UHS2 SET PHY Settings %08x %08x\n", + payload[0], payload[1]); + DBG("host->flags=%08x dev_prop.speed_range_set=%x\n", + host->flags, + host->uhs2_dev_prop.speed_range_set); + DBG("dev_prop.n_lss_sync_set=%x host_caps.n_lss_sync_set=%x\n", + host->uhs2_dev_prop.n_lss_sync_set, + host->uhs2_caps.n_lss_sync_set); + DBG("dev_prop.n_lss_dir_set=%x host_caps.n_lss_dir_set=%x\n", + host->uhs2_dev_prop.n_lss_dir_set, + host->uhs2_caps.n_lss_dir_set); + + DBG("Begin SET_COMMON_CFG header=0x%x arg=0x%x\n", + header, arg); + DBG("\t\tpayload[0]=0x%x payload[1]=0x%x\n", + payload[0], payload[1]); + + resp_len = 4; + memset(resp, 0, sizeof(resp)); + + uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, + payload, plen, resp, resp_len); + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) { + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n", + mmc_hostname(host), __func__, err); + return -EIO; + } + + if (!(resp[2] & 0x80)) + break; + + DBG("%s: %s: UHS2 SET PHY Settings fail, res= 0x%x!\n", + mmc_hostname(host), __func__, resp[2]); + } + + DBG("SET_COMMON_CFG: LINK-TRAN Settings.\n"); + arg = ((UHS2_DEV_CONFIG_LINK_TRAN_SET & 0xFF) << 8) | + UHS2_NATIVE_CMD_WRITE | + UHS2_NATIVE_CMD_PLEN_8B | + (UHS2_DEV_CONFIG_LINK_TRAN_SET >> 8); + + plen = 2; + + if (host->uhs2_dev_prop.app_type == UHS2_DEV_CONFIG_APP_SD_MEM) + host->uhs2_dev_prop.maxblk_len_set = + UHS2_DEV_CONFIG_LT_SET_MAX_BLK_LEN; + else + host->uhs2_dev_prop.maxblk_len_set = + min(host->uhs2_dev_prop.maxblk_len, + host->uhs2_caps.maxblk_len); + host->uhs2_caps.maxblk_len_set = host->uhs2_dev_prop.maxblk_len_set; + + host->uhs2_dev_prop.n_fcu_set = + min(host->uhs2_dev_prop.n_fcu, + host->uhs2_caps.n_fcu); + host->uhs2_caps.n_fcu_set = host->uhs2_dev_prop.n_fcu_set; + + host->uhs2_dev_prop.n_data_gap_set = + max(nMinDataGap, host->uhs2_dev_prop.n_data_gap); + + host->uhs2_caps.n_data_gap_set = host->uhs2_dev_prop.n_data_gap_set; + + host->uhs2_caps.max_retry_set = 3; + host->uhs2_dev_prop.max_retry_set = host->uhs2_caps.max_retry_set; + + payload[0] = (host->uhs2_dev_prop.maxblk_len_set << + UHS2_DEV_CONFIG_MAX_BLK_LEN_POS) | + (host->uhs2_dev_prop.max_retry_set << + UHS2_DEV_CONFIG_LT_SET_MAX_RETRY_POS) | + (host->uhs2_dev_prop.n_fcu_set << + UHS2_DEV_CONFIG_N_FCU_POS); + payload[1] = host->uhs2_dev_prop.n_data_gap_set; + payload[0] = cpu_to_be32(payload[0]); + payload[1] = cpu_to_be32(payload[1]); + + DBG("Begin SET_COMMON_CFG header=0x%x arg=0x%x\n", header, arg); + DBG("\t\tpayload[0]=0x%x payload[1]=0x%x\n", payload[0], payload[1]); + + uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, plen, NULL, 0); + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) { + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n", + mmc_hostname(host), __func__, err); + return -EIO; + } + + DBG("SET_COMMON_CFG: Set Config Completion.\n"); + arg = ((UHS2_DEV_CONFIG_GEN_SET & 0xFF) << 8) | + UHS2_NATIVE_CMD_WRITE | + UHS2_NATIVE_CMD_PLEN_8B | + (UHS2_DEV_CONFIG_GEN_SET >> 8); + + plen = 2; + payload[0] = 0; + payload[1] = UHS2_DEV_CONFIG_GEN_SET_CFG_COMPLETE; + payload[0] = cpu_to_be32(payload[0]); + payload[1] = cpu_to_be32(payload[1]); + + DBG("Begin SET_COMMON_CFG, header=0x%x, arg=0x%x, payload[0] = 0x%x.\n", + header, arg, payload[0]); + resp_len = 5; + memset(resp, 0, sizeof(resp)); + uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, plen, + resp, resp_len); + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) { + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n", + mmc_hostname(host), __func__, err); + return -EIO; + } + + /* Set host Config Setting registers */ + if (host->ops->uhs2_set_reg(host, SET_CONFIG)) { + pr_err("%s: %s: UHS2 SET_CONFIG fail!\n", + mmc_hostname(host), __func__); + return -EIO; + } + + return 0; +} + +static int uhs2_go_dormant(struct mmc_host *host, bool hibernate) +{ + struct mmc_command cmd = {0}; + struct uhs2_command uhs2_cmd = {}; + u16 header = 0, arg = 0; + u32 payload[1]; + u8 plen = 1; + int err; + + /* Disable Normal INT */ + if (host->ops->uhs2_set_reg(host, DISABLE_INT)) { + pr_err("%s: %s: UHS2 DISABLE_INT fail!\n", + mmc_hostname(host), __func__); + return -EIO; + } + + header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD | + host->uhs2_dev_prop.node_id; + + arg = ((UHS2_DEV_CMD_GO_DORMANT_STATE & 0xFF) << 8) | + UHS2_NATIVE_CMD_WRITE | + UHS2_NATIVE_CMD_PLEN_4B | + (UHS2_DEV_CMD_GO_DORMANT_STATE >> 8); + + if (hibernate) + payload[0] = UHS2_DEV_CMD_DORMANT_HIBER; + + DBG("Begin GO_DORMANT_STATE, header=0x%x, arg=0x%x, payload=0x%x.\n", + header, arg, payload[0]); + uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, plen, NULL, 0); + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) { + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n", + mmc_hostname(host), __func__, err); + return -EIO; + } + + /* Check Dormant State in Present */ + if (host->ops->uhs2_set_reg(host, CHECK_DORMANT)) { + pr_err("%s: %s: UHS2 GO_DORMANT_STATE fail!\n", + mmc_hostname(host), __func__); + return -EIO; + } + + host->ops->uhs2_disable_clk(host); + + return 0; +} + +static int uhs2_change_speed(struct mmc_host *host) +{ + int err; + + /* Change Speed Range */ + if (host->ops->uhs2_set_reg(host, SET_SPEED_B)) { + pr_err("%s: %s: UHS2 SET_SPEED fail!\n", + mmc_hostname(host), __func__); + return -EIO; + } + + err = uhs2_go_dormant(host, false); + if (err) { + pr_err("%s: %s: UHS2 GO_DORMANT_STATE fail, err= 0x%x!\n", + mmc_hostname(host), __func__, err); + return -EIO; + } + + /* restore sd clock */ + mdelay(5); + host->ops->uhs2_enable_clk(host); + + /* Enable Normal INT */ + if (host->ops->uhs2_set_reg(host, ENABLE_INT)) { + pr_err("%s: %s: UHS2 ENABLE_INT fail!\n", + mmc_hostname(host), __func__); + return -EIO; + } + + if (host->ops->uhs2_detect_init(host)) { + pr_err("%s: %s: uhs2_detect_init() fail!\n", + mmc_hostname(host), __func__); + return -EIO; + } + + return 0; +} + +/** + * mmc_uhs2_rescan_try_freq - select UHS2 interface + * @host: MMC host + * @freq: Bus speed + * + * Try to select UHS2 interface and initialize the bus for a given + * frequency, @freq. + * + * Return: 0 on success, non-zero error on failure + */ +int mmc_uhs2_rescan_try_freq(struct mmc_host *host, unsigned int freq) +{ + int err = -EIO; + + host->flags |= MMC_UHS2_SUPPORT; + host->f_init = freq; + + pr_debug("%s: %s: trying to init card at %u Hz\n", + mmc_hostname(host), __func__, host->f_init); + + mmc_power_up(host, 0); + if (host->ops->uhs2_detect_init(host)) { + pr_err("%s: fail to detect UHS2!\n", mmc_hostname(host)); + err = UHS2_PHY_INIT_ERR; + goto init_fail; + } + + if (uhs2_dev_init(host)) { + pr_err("%s: UHS2 DEVICE_INIT fail!\n", mmc_hostname(host)); + goto init_fail; + } + + if (uhs2_enum(host)) { + pr_err("%s: UHS2 ENUMERATE fail!\n", mmc_hostname(host)); + goto init_fail; + } + + if (uhs2_config_read(host)) { + pr_err("%s: UHS2 INQUIRY_CONFIG fail!\n", mmc_hostname(host)); + goto init_fail; + } + + if (uhs2_config_write(host)) { + pr_err("%s: UHS2 SET_COMMON_CONFIG fail!\n", + mmc_hostname(host)); + goto init_fail; + } + + mmc_delay(10); + + /* Change to Speed Range B if it is supported */ + if (host->flags & MMC_UHS2_SPEED_B) + if (uhs2_change_speed(host)) { + pr_err("%s: UHS2 uhs2_change_speed() fail!\n", + mmc_hostname(host)); + goto init_fail; + } + + host->flags |= MMC_UHS2_INITIALIZED; + + mmc_send_if_cond(host, host->ocr_avail); + + /* On market, only can some SD cards support UHS-II so only call SD + * attach process here. + */ + if (!(host->caps2 & MMC_CAP2_NO_SD)) { + err = mmc_attach_sd(host); + if (!err) + return 0; + } else { + err = -EIO; + } + +init_fail: + mmc_power_off(host); + if (host->flags & MMC_UHS2_INITIALIZED) + host->flags &= ~MMC_UHS2_INITIALIZED; + host->flags &= ~MMC_UHS2_SUPPORT; + + return err; +} +EXPORT_SYMBOL_GPL(mmc_uhs2_rescan_try_freq); diff --git a/drivers/mmc/core/uhs2.h b/drivers/mmc/core/uhs2.h new file mode 100644 index 000000000000..e3389d4dda3b --- /dev/null +++ b/drivers/mmc/core/uhs2.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * driver/mmc/core/uhs2.h - UHS-II driver + * + * Header file for UHS-II packets, Host Controller registers and I/O + * accessors. + * + * Copyright (C) 2014 Intel Corp, All Rights Reserved. + */ +#ifndef MMC_UHS2_H +#define MMC_UHS2_H + +#include +#include + +#define UHS2_PHY_INIT_ERR 1 + +int mmc_uhs2_rescan_try_freq(struct mmc_host *host, unsigned int freq); + +#endif /* MMC_UHS2_H */