diff mbox series

[RFC,v3.1,06/27] mmc: core: UHS-II support, generate UHS-II SD command packet

Message ID 20201106022726.19831-7-takahiro.akashi@linaro.org (mailing list archive)
State New, archived
Headers show
Series Add support UHS-II for GL9755 | expand

Commit Message

AKASHI Takahiro Nov. 6, 2020, 2:27 a.m. UTC 
In SD-TRAN protocol, legacy SD commands should be "encapsulated" in SD
packets as described in SD specification.
Please see section 7.1 and 7.2.1 in "UHS-II Simplified Addendum."

Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 drivers/mmc/core/core.c | 18 +++++++++++
 drivers/mmc/core/uhs2.c | 70 +++++++++++++++++++++++++++++++++++++++++
 drivers/mmc/core/uhs2.h |  1 +
 3 files changed, 89 insertions(+)
diff mbox series

Patch

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index a08cb1c0f6d2..ac43e93033e6 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -337,6 +337,8 @@  static int mmc_mrq_prep(struct mmc_host *host, struct mmc_request *mrq)
 
 int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
 {
+	struct uhs2_command uhs2_cmd;
+	u32 payload[4]; /* for maximum size */
 	int err;
 
 	init_completion(&mrq->cmd_completion);
@@ -354,6 +356,13 @@  int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
 	if (err)
 		return err;
 
+	if (host->flags & MMC_UHS2_SUPPORT &&
+	    host->flags & MMC_UHS2_INITIALIZED) {
+		uhs2_cmd.payload = payload;
+		mrq->cmd->uhs2_cmd = &uhs2_cmd;
+		uhs2_prepare_sd_cmd(host, mrq);
+	}
+
 	led_trigger_event(host->led, LED_FULL);
 	__mmc_start_request(host, mrq);
 
@@ -433,6 +442,8 @@  EXPORT_SYMBOL(mmc_wait_for_req_done);
  */
 int mmc_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq)
 {
+	struct uhs2_command uhs2_cmd;
+	u32 payload[4]; /* for maximum size */
 	int err;
 
 	/*
@@ -453,6 +464,13 @@  int mmc_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq)
 	if (err)
 		goto out_err;
 
+	if (host->flags & MMC_UHS2_SUPPORT &&
+	    host->flags & MMC_UHS2_INITIALIZED) {
+		uhs2_cmd.payload = payload;
+		mrq->cmd->uhs2_cmd = &uhs2_cmd;
+		uhs2_prepare_sd_cmd(host, mrq);
+	}
+
 	err = host->cqe_ops->cqe_request(host, mrq);
 	if (err)
 		goto out_err;
diff --git a/drivers/mmc/core/uhs2.c b/drivers/mmc/core/uhs2.c
index acb46b5b57ef..1f6d0e0cf355 100644
--- a/drivers/mmc/core/uhs2.c
+++ b/drivers/mmc/core/uhs2.c
@@ -807,3 +807,73 @@  int mmc_uhs2_rescan_try_freq(struct mmc_host *host, unsigned int freq)
 	return err;
 }
 EXPORT_SYMBOL_GPL(mmc_uhs2_rescan_try_freq);
+
+/**
+ * uhs2_prepare_sd_cmd - prepare for SD command packet
+ * @host:	MMC host
+ * @mrq:	MMC request
+ *
+ * Initialize and fill in a header and a payload of SD command packet.
+ * The caller should allocate uhs2_command in host->cmd->uhs2_cmd in
+ * advance.
+ *
+ * Return:	0 on success, non-zero error on failure
+ */
+int uhs2_prepare_sd_cmd(struct mmc_host *host, struct mmc_request *mrq)
+{
+	struct mmc_command *cmd;
+	struct uhs2_command *uhs2_cmd;
+	u16 header = 0, arg = 0;
+	u32 *payload;
+	u8 plen = 0;
+
+	cmd = mrq->cmd;
+	header = host->uhs2_dev_prop.node_id;
+	if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC)
+		header |= UHS2_PACKET_TYPE_DCMD;
+	else
+		header |= UHS2_PACKET_TYPE_CCMD;
+
+	arg = cmd->opcode << UHS2_SD_CMD_INDEX_POS;
+
+	uhs2_cmd = cmd->uhs2_cmd;
+	payload = uhs2_cmd->payload;
+	plen = 2; /* at the maximum */
+
+	if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC &&
+	    !cmd->uhs2_tmode0_flag) {
+		if (host->flags & MMC_UHS2_2L_HD)
+			arg |= UHS2_DCMD_2L_HD_MODE;
+
+		arg |= UHS2_DCMD_LM_TLEN_EXIST;
+
+		if (cmd->data->blocks == 1 &&
+		    cmd->data->blksz != 512 &&
+		    cmd->opcode != MMC_READ_SINGLE_BLOCK &&
+		    cmd->opcode != MMC_WRITE_BLOCK) {
+			arg |= UHS2_DCMD_TLUM_BYTE_MODE;
+			payload[1] = uhs2_dcmd_convert_msb(cmd->data->blksz);
+		} else {
+			payload[1] = uhs2_dcmd_convert_msb(cmd->data->blocks);
+		}
+
+		if (cmd->opcode == SD_IO_RW_EXTENDED) {
+			arg &= ~(UHS2_DCMD_LM_TLEN_EXIST |
+				UHS2_DCMD_TLUM_BYTE_MODE |
+				UHS2_NATIVE_DCMD_DAM_IO);
+			payload[1] = 0;
+			plen = 1;
+		}
+	} else {
+		plen = 1;
+	}
+
+	payload[0] = uhs2_dcmd_convert_msb(cmd->arg);
+	pr_debug("%s: %s: sd_cmd->arg = 0x%x, payload[0]= 0x%x.\n",
+		 mmc_hostname(host), __func__, cmd->arg, payload[0]);
+
+	uhs2_cmd_assemble(cmd, uhs2_cmd, header, arg, payload, plen, NULL, 0);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(uhs2_prepare_sd_cmd);
diff --git a/drivers/mmc/core/uhs2.h b/drivers/mmc/core/uhs2.h
index e3389d4dda3b..48486ba21062 100644
--- a/drivers/mmc/core/uhs2.h
+++ b/drivers/mmc/core/uhs2.h
@@ -16,5 +16,6 @@ 
 #define UHS2_PHY_INIT_ERR	1
 
 int mmc_uhs2_rescan_try_freq(struct mmc_host *host, unsigned int freq);
+int uhs2_prepare_sd_cmd(struct mmc_host *host, struct mmc_request *mrq);
 
 #endif /* MMC_UHS2_H */