diff mbox series

[RFC,v3.1,08/27] mmc: sdhci: add a kernel configuration for enabling UHS-II support

Message ID 20201106022726.19831-9-takahiro.akashi@linaro.org (mailing list archive)
State New, archived
Headers show
Series Add support UHS-II for GL9755 | expand

Commit Message

AKASHI Takahiro Nov. 6, 2020, 2:27 a.m. UTC 
This kernel configuration, CONFIG_MMC_SDHCI_UHS2, will be used
in the following commits to indicate UHS-II specific code in sdhci
controllers.

Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 drivers/mmc/host/Kconfig | 9 +++++++++
 1 file changed, 9 insertions(+)

Comments

Adrian Hunter Nov. 26, 2020, 8:14 a.m. UTC | #1 
On 6/11/20 4:27 am, AKASHI Takahiro wrote:
> This kernel configuration, CONFIG_MMC_SDHCI_UHS2, will be used
> in the following commits to indicate UHS-II specific code in sdhci
> controllers.

This patch needs to be combined with a patch that actually uses the config.

> 
> Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> ---
>  drivers/mmc/host/Kconfig | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 31481c9fcc2e..5ca9ac03db40 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -89,6 +89,15 @@ config MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
>  
>  	  This is the case for the Nintendo Wii SDHCI.
>  
> +config MMC_SDHCI_UHS2
> +	tristate "UHS2 support on SDHCI controller"
> +	depends on MMC_SDHCI
> +	help
> +	  This option is selected by SDHCI controller drivers that want to
> +	  support UHS2-capable devices.
> +
> +	  If you have a controller with this feature, say Y or M here.
> +
>  config MMC_SDHCI_PCI
>  	tristate "SDHCI support on PCI bus"
>  	depends on MMC_SDHCI && PCI
>
AKASHI Takahiro Nov. 30, 2020, 5:17 a.m. UTC | #2 
On Thu, Nov 26, 2020 at 10:14:36AM +0200, Adrian Hunter wrote:
> On 6/11/20 4:27 am, AKASHI Takahiro wrote:
> > This kernel configuration, CONFIG_MMC_SDHCI_UHS2, will be used
> > in the following commits to indicate UHS-II specific code in sdhci
> > controllers.
> 
> This patch needs to be combined with a patch that actually uses the config.

Earlier is better. So the patch #10/27 would be the best.

-Takahiro Akashi

> > 
> > Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
> > Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> > ---
> >  drivers/mmc/host/Kconfig | 9 +++++++++
> >  1 file changed, 9 insertions(+)
> > 
> > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> > index 31481c9fcc2e..5ca9ac03db40 100644
> > --- a/drivers/mmc/host/Kconfig
> > +++ b/drivers/mmc/host/Kconfig
> > @@ -89,6 +89,15 @@ config MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
> >  
> >  	  This is the case for the Nintendo Wii SDHCI.
> >  
> > +config MMC_SDHCI_UHS2
> > +	tristate "UHS2 support on SDHCI controller"
> > +	depends on MMC_SDHCI
> > +	help
> > +	  This option is selected by SDHCI controller drivers that want to
> > +	  support UHS2-capable devices.
> > +
> > +	  If you have a controller with this feature, say Y or M here.
> > +
> >  config MMC_SDHCI_PCI
> >  	tristate "SDHCI support on PCI bus"
> >  	depends on MMC_SDHCI && PCI
> > 
>
diff mbox series

Patch

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 31481c9fcc2e..5ca9ac03db40 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -89,6 +89,15 @@  config MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
 
 	  This is the case for the Nintendo Wii SDHCI.
 
+config MMC_SDHCI_UHS2
+	tristate "UHS2 support on SDHCI controller"
+	depends on MMC_SDHCI
+	help
+	  This option is selected by SDHCI controller drivers that want to
+	  support UHS2-capable devices.
+
+	  If you have a controller with this feature, say Y or M here.
+
 config MMC_SDHCI_PCI
 	tristate "SDHCI support on PCI bus"
 	depends on MMC_SDHCI && PCI