@@ -379,44 +379,62 @@ EXPORT_SYMBOL(mmc_of_parse);
/**
* mmc_of_parse_voltage - return mask of supported voltages
- * @np: The device node need to be parsed.
+ * @host: host whose properties should be parsed.
* @mask: mask of voltages available for MMC/SD/SDIO
*
- * Parse the "voltage-ranges" DT property, returning zero if it is not
+ * Parse the "voltage-ranges" property, returning zero if it is not
* found, negative errno if the voltage-range specification is invalid,
* or one if the voltage-range is specified and successfully parsed.
*/
-int mmc_of_parse_voltage(struct device_node *np, u32 *mask)
+int mmc_of_parse_voltage(struct mmc_host *host, u32 *mask)
{
- const u32 *voltage_ranges;
+ const char *prop = "voltage-ranges";
+ struct device *dev = host->parent;
+ u32 *voltage_ranges;
int num_ranges, i;
+ int ret;
- voltage_ranges = of_get_property(np, "voltage-ranges", &num_ranges);
- if (!voltage_ranges) {
- pr_debug("%pOF: voltage-ranges unspecified\n", np);
+ if (!device_property_present(dev, prop)) {
+ dev_dbg(dev, "%s unspecified\n", prop);
return 0;
}
- num_ranges = num_ranges / sizeof(*voltage_ranges) / 2;
+
+ ret = device_property_count_u32(dev, prop);
+ if (ret < 0)
+ return ret;
+
+ num_ranges = ret / 2;
if (!num_ranges) {
- pr_err("%pOF: voltage-ranges empty\n", np);
+ dev_err(dev, "%s empty\n", prop);
return -EINVAL;
}
+ voltage_ranges = kcalloc(2 * num_ranges, sizeof(*voltage_ranges), GFP_KERNEL);
+ if (!voltage_ranges)
+ return -ENOMEM;
+
+ ret = device_property_read_u32_array(dev, prop, voltage_ranges, 2 * num_ranges);
+ if (ret) {
+ kfree(voltage_ranges);
+ return ret;
+ }
+
for (i = 0; i < num_ranges; i++) {
const int j = i * 2;
u32 ocr_mask;
- ocr_mask = mmc_vddrange_to_ocrmask(
- be32_to_cpu(voltage_ranges[j]),
- be32_to_cpu(voltage_ranges[j + 1]));
+ ocr_mask = mmc_vddrange_to_ocrmask(voltage_ranges[j + 0],
+ voltage_ranges[j + 1]);
if (!ocr_mask) {
- pr_err("%pOF: voltage-range #%d is invalid\n",
- np, i);
+ dev_err(dev, "range #%d in %s is invalid\n", i, prop);
+ kfree(voltage_ranges);
return -EINVAL;
}
*mask |= ocr_mask;
}
+ kfree(voltage_ranges);
+
return 1;
}
EXPORT_SYMBOL(mmc_of_parse_voltage);
@@ -1397,6 +1397,8 @@ static int mmc_spi_probe(struct spi_device *spi)
host->ones = ones;
+ dev_set_drvdata(&spi->dev, mmc);
+
/* Platform data is used to hook up things like card sensing
* and power switching gpios.
*/
@@ -1413,8 +1415,6 @@ static int mmc_spi_probe(struct spi_device *spi)
host->powerup_msecs = 250;
}
- dev_set_drvdata(&spi->dev, mmc);
-
/* preallocate dma buffers */
host->data = kmalloc(sizeof(*host->data), GFP_KERNEL);
if (!host->data)
@@ -1494,8 +1494,8 @@ static int mmc_spi_probe(struct spi_device *spi)
fail_dma:
kfree(host->data);
fail_nobuf1:
- mmc_free_host(mmc);
mmc_spi_put_pdata(spi);
+ mmc_free_host(mmc);
nomem:
kfree(ones);
return status;
@@ -1518,8 +1518,8 @@ static int mmc_spi_remove(struct spi_device *spi)
kfree(host->ones);
spi->max_speed_hz = mmc->f_max;
- mmc_free_host(mmc);
mmc_spi_put_pdata(spi);
+ mmc_free_host(mmc);
return 0;
}
@@ -54,6 +54,7 @@ static void of_mmc_spi_exit(struct device *dev, void *mmc)
struct mmc_spi_platform_data *mmc_spi_get_pdata(struct spi_device *spi)
{
+ struct mmc_host *mmc = dev_get_drvdata(&spi->dev);
struct device *dev = &spi->dev;
struct device_node *np = dev->of_node;
struct of_mmc_spi *oms;
@@ -65,7 +66,7 @@ struct mmc_spi_platform_data *mmc_spi_get_pdata(struct spi_device *spi)
if (!oms)
return NULL;
- if (mmc_of_parse_voltage(np, &oms->pdata.ocr_mask) <= 0)
+ if (mmc_of_parse_voltage(mmc, &oms->pdata.ocr_mask) <= 0)
goto err_ocr;
oms->detect_irq = irq_of_parse_and_map(np, 0);
@@ -1486,7 +1486,7 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
if (of_property_read_u32(np, "fsl,delay-line", &boarddata->delay_line))
boarddata->delay_line = 0;
- mmc_of_parse_voltage(np, &host->ocr_mask);
+ mmc_of_parse_voltage(host->mmc, &host->ocr_mask);
if (esdhc_is_usdhc(imx_data)) {
imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl,
@@ -1489,7 +1489,7 @@ static int sdhci_esdhc_probe(struct platform_device *pdev)
if (ret)
goto err;
- mmc_of_parse_voltage(np, &host->ocr_mask);
+ mmc_of_parse_voltage(host->mmc, &host->ocr_mask);
ret = sdhci_add_host(host);
if (ret)
@@ -514,7 +514,7 @@ void mmc_free_host(struct mmc_host *);
void mmc_of_parse_clk_phase(struct mmc_host *host,
struct mmc_clk_phase_map *map);
int mmc_of_parse(struct mmc_host *host);
-int mmc_of_parse_voltage(struct device_node *np, u32 *mask);
+int mmc_of_parse_voltage(struct mmc_host *host, u32 *mask);
static inline void *mmc_priv(struct mmc_host *host)
{
mmc_of_parse() for a few years has been using device property API. Convert mmc_of_parse_voltage() as well. At the same time switch users to new API. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/mmc/core/host.c | 46 +++++++++++++++++++++--------- drivers/mmc/host/mmc_spi.c | 8 +++--- drivers/mmc/host/of_mmc_spi.c | 3 +- drivers/mmc/host/sdhci-esdhc-imx.c | 2 +- drivers/mmc/host/sdhci-of-esdhc.c | 2 +- include/linux/mmc/host.h | 2 +- 6 files changed, 41 insertions(+), 22 deletions(-)