diff mbox series

[RFC,v2,11/13] arm64: dts: qcom: sdm845-db845c: add second channel to qca power sequencer

Message ID 20210829131305.534417-12-dmitry.baryshkov@linaro.org (mailing list archive)
State New, archived
Headers show
Series create power sequencing subsystem | expand

Commit Message

Dmitry Baryshkov Aug. 29, 2021, 1:13 p.m. UTC 
On DB845c board WiFi/BT chip can use both RF channels/antennas, so add
vddch1-supply property.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 7 +++++++
 1 file changed, 7 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index a6a34a959a91..0f3214c60980 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -342,6 +342,12 @@  vreg_l21a_2p95: ldo21 {
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_l24a_3p075: ldo24 {
 			regulator-min-microvolt = <3088000>;
 			regulator-max-microvolt = <3088000>;
@@ -637,6 +643,7 @@  &qca_pwrseq {
 	vddxo-supply = <&vreg_l7a_1p8>;
 	vddrf-supply = <&vreg_l17a_1p3>;
 	vddch0-supply = <&vreg_l25a_3p3>;
+	vddch1-supply = <&vreg_l23a_3p3>;
 };
 
 &sdhc_2 {