From patchwork Wed Oct 6 03:53:55 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Baryshkov X-Patchwork-Id: 12538479 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 843C1C433EF for ; Wed, 6 Oct 2021 03:55:19 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 6D7CE611C1 for ; Wed, 6 Oct 2021 03:55:19 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S237817AbhJFD5H (ORCPT ); Tue, 5 Oct 2021 23:57:07 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:32968 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S237300AbhJFD4H (ORCPT ); Tue, 5 Oct 2021 23:56:07 -0400 Received: from mail-lf1-x134.google.com (mail-lf1-x134.google.com [IPv6:2a00:1450:4864:20::134]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C6833C061768 for ; Tue, 5 Oct 2021 20:54:15 -0700 (PDT) Received: by mail-lf1-x134.google.com with SMTP id r19so4458775lfe.10 for ; Tue, 05 Oct 2021 20:54:15 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=rbD+BS0NcNaczpvYu66j0XoKIa1SV+z+K/gWdXPxBUk=; b=KykwizkLmvDe9V3ztSXHrMUbEtG+5O9apjwceX15mSAxfOGddjZBn9DvzqFQm8al+v EAnxZ4OCvL47ljwDebZl06eRDP+igYzAFrsJJ+opFdIsw1yb/jto3oBjuKWhwchmzFZk mzy0kAh+LD6tz+hN8sGOY125bt6SsnhGXQMAcV3SbFx/KPE+6HAg9GcKn4rXy+OHW9a9 EJqd/8q7d+PsNvrrx65/+T9ur6agPadWkmCQTbQ3U/B/stGNNXhj/8ogUfAi8CGTLy7Q Pzj9M/b0zsb5GzGml+qQ1rPPUbEVQyDD+9ZVBLd8fsMeGmeWr/I8emBgFrsG/NavD70P tDlQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=rbD+BS0NcNaczpvYu66j0XoKIa1SV+z+K/gWdXPxBUk=; b=NDTdw8Ma7SzDLxiECFWREpofw+238z6wz98Yy1XWtL28ZqHONqkGlg1t+npvkC7qMx 2ncwnOivh/JN1QqiKs3/wGQw6s5HIGFLgVUVg8xouy0RI5r1/Qnyz4moQC3Xpc1ju0KX 1g9KDiuTocAZ1Xbztiupk5snlbTPPfWZVpKqM5El8KYOypg8pcpCry4JVAONdlj5vzX/ Dv95Y6F0+uW74/eyCpjfhc2orY3ntGDGN1WcWfLYccuNiNUSAlGm9AUVkpmdNxPpJmdE 8beQVlgpuMw7F62Ucqjcx27eTvBliZXMZwDfpRy+4BYw9r8Wdh792TrCVDXERXndMNOU 1RaQ== X-Gm-Message-State: AOAM531dzh+F2ZslRsBGGyvb7gt+SUGFC81jFTPrIPGIy71GlbAMOwGd 7nHdL6QGgRHBiK+9Vb2zZ51SuQ== X-Google-Smtp-Source: ABdhPJyHOYUrhGd9ENG3ERRSBh4fXx2/aUNfIRp3OWEd/bpQIfbGu6lhQiSaVH9XY6NpQ7K+CSnSLg== X-Received: by 2002:a05:6512:ea2:: with SMTP id bi34mr6935938lfb.638.1633492453860; Tue, 05 Oct 2021 20:54:13 -0700 (PDT) Received: from eriador.lan ([37.153.55.125]) by smtp.gmail.com with ESMTPSA id s4sm2142967lfd.103.2021.10.05.20.54.13 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 05 Oct 2021 20:54:13 -0700 (PDT) From: Dmitry Baryshkov To: Andy Gross , Bjorn Andersson , Ulf Hansson , Marcel Holtmann , Johan Hedberg , Luiz Augusto von Dentz , Kalle Valo , "David S. Miller" , Jakub Kicinski , Stanimir Varbanov Cc: linux-arm-msm@vger.kernel.org, linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org, ath10k@lists.infradead.org, linux-wireless@vger.kernel.org, netdev@vger.kernel.org Subject: [PATCH v1 03/15] pwrseq: port MMC's pwrseq drivers to new pwrseq subsystem Date: Wed, 6 Oct 2021 06:53:55 +0300 Message-Id: <20211006035407.1147909-4-dmitry.baryshkov@linaro.org> X-Mailer: git-send-email 2.33.0 In-Reply-To: <20211006035407.1147909-1-dmitry.baryshkov@linaro.org> References: <20211006035407.1147909-1-dmitry.baryshkov@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org Port MMC's all pwrseq drivers to new pwrseq subsystem. Signed-off-by: Dmitry Baryshkov --- .../pwrseq}/mmc-pwrseq-emmc.yaml | 6 +- .../pwrseq}/mmc-pwrseq-sd8787.yaml | 6 +- .../pwrseq}/mmc-pwrseq-simple.yaml | 6 +- drivers/mmc/core/Kconfig | 32 ---- drivers/mmc/core/Makefile | 3 - drivers/mmc/core/pwrseq_emmc.c | 120 ------------- drivers/mmc/core/pwrseq_sd8787.c | 117 ------------- drivers/mmc/core/pwrseq_simple.c | 164 ------------------ drivers/power/pwrseq/Kconfig | 32 ++++ drivers/power/pwrseq/Makefile | 4 + drivers/power/pwrseq/pwrseq_emmc.c | 121 +++++++++++++ drivers/power/pwrseq/pwrseq_sd8787.c | 108 ++++++++++++ drivers/power/pwrseq/pwrseq_simple.c | 162 +++++++++++++++++ include/linux/pwrseq/driver.h | 4 +- 14 files changed, 444 insertions(+), 441 deletions(-) rename Documentation/devicetree/bindings/{mmc => power/pwrseq}/mmc-pwrseq-emmc.yaml (91%) rename Documentation/devicetree/bindings/{mmc => power/pwrseq}/mmc-pwrseq-sd8787.yaml (86%) rename Documentation/devicetree/bindings/{mmc => power/pwrseq}/mmc-pwrseq-simple.yaml (92%) delete mode 100644 drivers/mmc/core/pwrseq_emmc.c delete mode 100644 drivers/mmc/core/pwrseq_sd8787.c delete mode 100644 drivers/mmc/core/pwrseq_simple.c create mode 100644 drivers/power/pwrseq/pwrseq_emmc.c create mode 100644 drivers/power/pwrseq/pwrseq_sd8787.c create mode 100644 drivers/power/pwrseq/pwrseq_simple.c diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml b/Documentation/devicetree/bindings/power/pwrseq/mmc-pwrseq-emmc.yaml similarity index 91% rename from Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml rename to Documentation/devicetree/bindings/power/pwrseq/mmc-pwrseq-emmc.yaml index 1fc7e620f328..a5e14e4a19b3 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml +++ b/Documentation/devicetree/bindings/power/pwrseq/mmc-pwrseq-emmc.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: http://devicetree.org/schemas/mmc/mmc-pwrseq-emmc.yaml# +$id: http://devicetree.org/schemas/power/pwrseq/mmc-pwrseq-emmc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Simple eMMC hardware reset provider binding @@ -32,6 +32,9 @@ properties: reset procedure as described in Jedec 4.4 specification, the gpio line should be defined as GPIO_ACTIVE_LOW. + "#pwrseq-cells": + const: 0 + required: - compatible - reset-gpios @@ -43,6 +46,7 @@ examples: #include sdhci0_pwrseq { compatible = "mmc-pwrseq-emmc"; + #pwrseq-cells = <0>; reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; }; ... diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml b/Documentation/devicetree/bindings/power/pwrseq/mmc-pwrseq-sd8787.yaml similarity index 86% rename from Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml rename to Documentation/devicetree/bindings/power/pwrseq/mmc-pwrseq-sd8787.yaml index 9e2396751030..7876be05573d 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml +++ b/Documentation/devicetree/bindings/power/pwrseq/mmc-pwrseq-sd8787.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: http://devicetree.org/schemas/mmc/mmc-pwrseq-sd8787.yaml# +$id: http://devicetree.org/schemas/power/pwrseq/mmc-pwrseq-sd8787.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Marvell SD8787 power sequence provider binding @@ -25,6 +25,9 @@ properties: description: contains a reset GPIO specifier with the default active state + "#pwrseq-cells": + const: 0 + required: - compatible - powerdown-gpios @@ -37,6 +40,7 @@ examples: #include wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-sd8787"; + #pwrseq-cells = <0>; powerdown-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>; reset-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>; }; diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml b/Documentation/devicetree/bindings/power/pwrseq/mmc-pwrseq-simple.yaml similarity index 92% rename from Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml rename to Documentation/devicetree/bindings/power/pwrseq/mmc-pwrseq-simple.yaml index 226fb191913d..3eff40fd347e 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml +++ b/Documentation/devicetree/bindings/power/pwrseq/mmc-pwrseq-simple.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: http://devicetree.org/schemas/mmc/mmc-pwrseq-simple.yaml# +$id: http://devicetree.org/schemas/power/pwrseq/mmc-pwrseq-simple.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Simple MMC power sequence provider binding @@ -47,6 +47,9 @@ properties: Delay in us after asserting the reset-gpios (if any) during power off of the card. + "#pwrseq-cells": + const: 0 + required: - compatible @@ -57,6 +60,7 @@ examples: #include sdhci0_pwrseq { compatible = "mmc-pwrseq-simple"; + #pwrseq-cells = <0>; reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; clocks = <&clk_32768_ck>; clock-names = "ext_clock"; diff --git a/drivers/mmc/core/Kconfig b/drivers/mmc/core/Kconfig index 6f25c34e4fec..cf7df64ce009 100644 --- a/drivers/mmc/core/Kconfig +++ b/drivers/mmc/core/Kconfig @@ -2,38 +2,6 @@ # # MMC core configuration # -config PWRSEQ_EMMC - tristate "HW reset support for eMMC" - default y - depends on OF - help - This selects Hardware reset support aka pwrseq-emmc for eMMC - devices. By default this option is set to y. - - This driver can also be built as a module. If so, the module - will be called pwrseq_emmc. - -config PWRSEQ_SD8787 - tristate "HW reset support for SD8787 BT + Wifi module" - depends on OF && (MWIFIEX || BT_MRVL_SDIO || LIBERTAS_SDIO || WILC1000_SDIO) - help - This selects hardware reset support for the SD8787 BT + Wifi - module. By default this option is set to n. - - This driver can also be built as a module. If so, the module - will be called pwrseq_sd8787. - -config PWRSEQ_SIMPLE - tristate "Simple HW reset support for MMC" - default y - depends on OF - help - This selects simple hardware reset support aka pwrseq-simple for MMC - devices. By default this option is set to y. - - This driver can also be built as a module. If so, the module - will be called pwrseq_simple. - config MMC_BLOCK tristate "MMC block device driver" depends on BLOCK diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile index 6a907736cd7a..322eb69bd00e 100644 --- a/drivers/mmc/core/Makefile +++ b/drivers/mmc/core/Makefile @@ -10,9 +10,6 @@ mmc_core-y := core.o bus.o host.o \ sdio_cis.o sdio_io.o sdio_irq.o \ slot-gpio.o regulator.o mmc_core-$(CONFIG_OF) += pwrseq.o -obj-$(CONFIG_PWRSEQ_SIMPLE) += pwrseq_simple.o -obj-$(CONFIG_PWRSEQ_SD8787) += pwrseq_sd8787.o -obj-$(CONFIG_PWRSEQ_EMMC) += pwrseq_emmc.o mmc_core-$(CONFIG_DEBUG_FS) += debugfs.o obj-$(CONFIG_MMC_BLOCK) += mmc_block.o mmc_block-objs := block.o queue.o diff --git a/drivers/mmc/core/pwrseq_emmc.c b/drivers/mmc/core/pwrseq_emmc.c deleted file mode 100644 index f6dde9edd7a3..000000000000 --- a/drivers/mmc/core/pwrseq_emmc.c +++ /dev/null @@ -1,120 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2015, Samsung Electronics Co., Ltd. - * - * Author: Marek Szyprowski - * - * Simple eMMC hardware reset provider - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "pwrseq.h" - -struct mmc_pwrseq_emmc { - struct mmc_pwrseq pwrseq; - struct notifier_block reset_nb; - struct gpio_desc *reset_gpio; -}; - -#define to_pwrseq_emmc(p) container_of(p, struct mmc_pwrseq_emmc, pwrseq) - -static void mmc_pwrseq_emmc_reset(struct mmc_host *host) -{ - struct mmc_pwrseq_emmc *pwrseq = to_pwrseq_emmc(host->pwrseq); - - gpiod_set_value_cansleep(pwrseq->reset_gpio, 1); - udelay(1); - gpiod_set_value_cansleep(pwrseq->reset_gpio, 0); - udelay(200); -} - -static int mmc_pwrseq_emmc_reset_nb(struct notifier_block *this, - unsigned long mode, void *cmd) -{ - struct mmc_pwrseq_emmc *pwrseq = container_of(this, - struct mmc_pwrseq_emmc, reset_nb); - gpiod_set_value(pwrseq->reset_gpio, 1); - udelay(1); - gpiod_set_value(pwrseq->reset_gpio, 0); - udelay(200); - - return NOTIFY_DONE; -} - -static const struct mmc_pwrseq_ops mmc_pwrseq_emmc_ops = { - .reset = mmc_pwrseq_emmc_reset, -}; - -static int mmc_pwrseq_emmc_probe(struct platform_device *pdev) -{ - struct mmc_pwrseq_emmc *pwrseq; - struct device *dev = &pdev->dev; - - pwrseq = devm_kzalloc(dev, sizeof(*pwrseq), GFP_KERNEL); - if (!pwrseq) - return -ENOMEM; - - pwrseq->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); - if (IS_ERR(pwrseq->reset_gpio)) - return PTR_ERR(pwrseq->reset_gpio); - - if (!gpiod_cansleep(pwrseq->reset_gpio)) { - /* - * register reset handler to ensure emmc reset also from - * emergency_reboot(), priority 255 is the highest priority - * so it will be executed before any system reboot handler. - */ - pwrseq->reset_nb.notifier_call = mmc_pwrseq_emmc_reset_nb; - pwrseq->reset_nb.priority = 255; - register_restart_handler(&pwrseq->reset_nb); - } else { - dev_notice(dev, "EMMC reset pin tied to a sleepy GPIO driver; reset on emergency-reboot disabled\n"); - } - - pwrseq->pwrseq.ops = &mmc_pwrseq_emmc_ops; - pwrseq->pwrseq.dev = dev; - pwrseq->pwrseq.owner = THIS_MODULE; - platform_set_drvdata(pdev, pwrseq); - - return mmc_pwrseq_register(&pwrseq->pwrseq); -} - -static int mmc_pwrseq_emmc_remove(struct platform_device *pdev) -{ - struct mmc_pwrseq_emmc *pwrseq = platform_get_drvdata(pdev); - - unregister_restart_handler(&pwrseq->reset_nb); - mmc_pwrseq_unregister(&pwrseq->pwrseq); - - return 0; -} - -static const struct of_device_id mmc_pwrseq_emmc_of_match[] = { - { .compatible = "mmc-pwrseq-emmc",}, - {/* sentinel */}, -}; - -MODULE_DEVICE_TABLE(of, mmc_pwrseq_emmc_of_match); - -static struct platform_driver mmc_pwrseq_emmc_driver = { - .probe = mmc_pwrseq_emmc_probe, - .remove = mmc_pwrseq_emmc_remove, - .driver = { - .name = "pwrseq_emmc", - .of_match_table = mmc_pwrseq_emmc_of_match, - }, -}; - -module_platform_driver(mmc_pwrseq_emmc_driver); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/core/pwrseq_sd8787.c b/drivers/mmc/core/pwrseq_sd8787.c deleted file mode 100644 index 2e120ad83020..000000000000 --- a/drivers/mmc/core/pwrseq_sd8787.c +++ /dev/null @@ -1,117 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * pwrseq_sd8787.c - power sequence support for Marvell SD8787 BT + Wifi chip - * - * Copyright (C) 2016 Matt Ranostay - * - * Based on the original work pwrseq_simple.c - * Copyright (C) 2014 Linaro Ltd - * Author: Ulf Hansson - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "pwrseq.h" - -struct mmc_pwrseq_sd8787 { - struct mmc_pwrseq pwrseq; - struct gpio_desc *reset_gpio; - struct gpio_desc *pwrdn_gpio; - u32 reset_pwrdwn_delay_ms; -}; - -#define to_pwrseq_sd8787(p) container_of(p, struct mmc_pwrseq_sd8787, pwrseq) - -static void mmc_pwrseq_sd8787_pre_power_on(struct mmc_host *host) -{ - struct mmc_pwrseq_sd8787 *pwrseq = to_pwrseq_sd8787(host->pwrseq); - - gpiod_set_value_cansleep(pwrseq->reset_gpio, 1); - - msleep(pwrseq->reset_pwrdwn_delay_ms); - gpiod_set_value_cansleep(pwrseq->pwrdn_gpio, 1); -} - -static void mmc_pwrseq_sd8787_power_off(struct mmc_host *host) -{ - struct mmc_pwrseq_sd8787 *pwrseq = to_pwrseq_sd8787(host->pwrseq); - - gpiod_set_value_cansleep(pwrseq->pwrdn_gpio, 0); - gpiod_set_value_cansleep(pwrseq->reset_gpio, 0); -} - -static const struct mmc_pwrseq_ops mmc_pwrseq_sd8787_ops = { - .pre_power_on = mmc_pwrseq_sd8787_pre_power_on, - .power_off = mmc_pwrseq_sd8787_power_off, -}; - -static const u32 sd8787_delay_ms = 300; -static const u32 wilc1000_delay_ms = 5; - -static const struct of_device_id mmc_pwrseq_sd8787_of_match[] = { - { .compatible = "mmc-pwrseq-sd8787", .data = &sd8787_delay_ms }, - { .compatible = "mmc-pwrseq-wilc1000", .data = &wilc1000_delay_ms }, - {/* sentinel */}, -}; -MODULE_DEVICE_TABLE(of, mmc_pwrseq_sd8787_of_match); - -static int mmc_pwrseq_sd8787_probe(struct platform_device *pdev) -{ - struct mmc_pwrseq_sd8787 *pwrseq; - struct device *dev = &pdev->dev; - const struct of_device_id *match; - - pwrseq = devm_kzalloc(dev, sizeof(*pwrseq), GFP_KERNEL); - if (!pwrseq) - return -ENOMEM; - - match = of_match_node(mmc_pwrseq_sd8787_of_match, pdev->dev.of_node); - pwrseq->reset_pwrdwn_delay_ms = *(u32 *)match->data; - - pwrseq->pwrdn_gpio = devm_gpiod_get(dev, "powerdown", GPIOD_OUT_LOW); - if (IS_ERR(pwrseq->pwrdn_gpio)) - return PTR_ERR(pwrseq->pwrdn_gpio); - - pwrseq->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); - if (IS_ERR(pwrseq->reset_gpio)) - return PTR_ERR(pwrseq->reset_gpio); - - pwrseq->pwrseq.dev = dev; - pwrseq->pwrseq.ops = &mmc_pwrseq_sd8787_ops; - pwrseq->pwrseq.owner = THIS_MODULE; - platform_set_drvdata(pdev, pwrseq); - - return mmc_pwrseq_register(&pwrseq->pwrseq); -} - -static int mmc_pwrseq_sd8787_remove(struct platform_device *pdev) -{ - struct mmc_pwrseq_sd8787 *pwrseq = platform_get_drvdata(pdev); - - mmc_pwrseq_unregister(&pwrseq->pwrseq); - - return 0; -} - -static struct platform_driver mmc_pwrseq_sd8787_driver = { - .probe = mmc_pwrseq_sd8787_probe, - .remove = mmc_pwrseq_sd8787_remove, - .driver = { - .name = "pwrseq_sd8787", - .of_match_table = mmc_pwrseq_sd8787_of_match, - }, -}; - -module_platform_driver(mmc_pwrseq_sd8787_driver); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c deleted file mode 100644 index ea4d3670560e..000000000000 --- a/drivers/mmc/core/pwrseq_simple.c +++ /dev/null @@ -1,164 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2014 Linaro Ltd - * - * Author: Ulf Hansson - * - * Simple MMC power sequence management - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "pwrseq.h" - -struct mmc_pwrseq_simple { - struct mmc_pwrseq pwrseq; - bool clk_enabled; - u32 post_power_on_delay_ms; - u32 power_off_delay_us; - struct clk *ext_clk; - struct gpio_descs *reset_gpios; -}; - -#define to_pwrseq_simple(p) container_of(p, struct mmc_pwrseq_simple, pwrseq) - -static void mmc_pwrseq_simple_set_gpios_value(struct mmc_pwrseq_simple *pwrseq, - int value) -{ - struct gpio_descs *reset_gpios = pwrseq->reset_gpios; - - if (!IS_ERR(reset_gpios)) { - unsigned long *values; - int nvalues = reset_gpios->ndescs; - - values = bitmap_alloc(nvalues, GFP_KERNEL); - if (!values) - return; - - if (value) - bitmap_fill(values, nvalues); - else - bitmap_zero(values, nvalues); - - gpiod_set_array_value_cansleep(nvalues, reset_gpios->desc, - reset_gpios->info, values); - - kfree(values); - } -} - -static void mmc_pwrseq_simple_pre_power_on(struct mmc_host *host) -{ - struct mmc_pwrseq_simple *pwrseq = to_pwrseq_simple(host->pwrseq); - - if (!IS_ERR(pwrseq->ext_clk) && !pwrseq->clk_enabled) { - clk_prepare_enable(pwrseq->ext_clk); - pwrseq->clk_enabled = true; - } - - mmc_pwrseq_simple_set_gpios_value(pwrseq, 1); -} - -static void mmc_pwrseq_simple_post_power_on(struct mmc_host *host) -{ - struct mmc_pwrseq_simple *pwrseq = to_pwrseq_simple(host->pwrseq); - - mmc_pwrseq_simple_set_gpios_value(pwrseq, 0); - - if (pwrseq->post_power_on_delay_ms) - msleep(pwrseq->post_power_on_delay_ms); -} - -static void mmc_pwrseq_simple_power_off(struct mmc_host *host) -{ - struct mmc_pwrseq_simple *pwrseq = to_pwrseq_simple(host->pwrseq); - - mmc_pwrseq_simple_set_gpios_value(pwrseq, 1); - - if (pwrseq->power_off_delay_us) - usleep_range(pwrseq->power_off_delay_us, - 2 * pwrseq->power_off_delay_us); - - if (!IS_ERR(pwrseq->ext_clk) && pwrseq->clk_enabled) { - clk_disable_unprepare(pwrseq->ext_clk); - pwrseq->clk_enabled = false; - } -} - -static const struct mmc_pwrseq_ops mmc_pwrseq_simple_ops = { - .pre_power_on = mmc_pwrseq_simple_pre_power_on, - .post_power_on = mmc_pwrseq_simple_post_power_on, - .power_off = mmc_pwrseq_simple_power_off, -}; - -static const struct of_device_id mmc_pwrseq_simple_of_match[] = { - { .compatible = "mmc-pwrseq-simple",}, - {/* sentinel */}, -}; -MODULE_DEVICE_TABLE(of, mmc_pwrseq_simple_of_match); - -static int mmc_pwrseq_simple_probe(struct platform_device *pdev) -{ - struct mmc_pwrseq_simple *pwrseq; - struct device *dev = &pdev->dev; - - pwrseq = devm_kzalloc(dev, sizeof(*pwrseq), GFP_KERNEL); - if (!pwrseq) - return -ENOMEM; - - pwrseq->ext_clk = devm_clk_get(dev, "ext_clock"); - if (IS_ERR(pwrseq->ext_clk) && PTR_ERR(pwrseq->ext_clk) != -ENOENT) - return PTR_ERR(pwrseq->ext_clk); - - pwrseq->reset_gpios = devm_gpiod_get_array(dev, "reset", - GPIOD_OUT_HIGH); - if (IS_ERR(pwrseq->reset_gpios) && - PTR_ERR(pwrseq->reset_gpios) != -ENOENT && - PTR_ERR(pwrseq->reset_gpios) != -ENOSYS) { - return PTR_ERR(pwrseq->reset_gpios); - } - - device_property_read_u32(dev, "post-power-on-delay-ms", - &pwrseq->post_power_on_delay_ms); - device_property_read_u32(dev, "power-off-delay-us", - &pwrseq->power_off_delay_us); - - pwrseq->pwrseq.dev = dev; - pwrseq->pwrseq.ops = &mmc_pwrseq_simple_ops; - pwrseq->pwrseq.owner = THIS_MODULE; - platform_set_drvdata(pdev, pwrseq); - - return mmc_pwrseq_register(&pwrseq->pwrseq); -} - -static int mmc_pwrseq_simple_remove(struct platform_device *pdev) -{ - struct mmc_pwrseq_simple *pwrseq = platform_get_drvdata(pdev); - - mmc_pwrseq_unregister(&pwrseq->pwrseq); - - return 0; -} - -static struct platform_driver mmc_pwrseq_simple_driver = { - .probe = mmc_pwrseq_simple_probe, - .remove = mmc_pwrseq_simple_remove, - .driver = { - .name = "pwrseq_simple", - .of_match_table = mmc_pwrseq_simple_of_match, - }, -}; - -module_platform_driver(mmc_pwrseq_simple_driver); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/power/pwrseq/Kconfig b/drivers/power/pwrseq/Kconfig index dab8f4d860fe..1985f13d9193 100644 --- a/drivers/power/pwrseq/Kconfig +++ b/drivers/power/pwrseq/Kconfig @@ -11,4 +11,36 @@ menuconfig PWRSEQ if PWRSEQ +config PWRSEQ_EMMC + tristate "HW reset support for eMMC" + default y + depends on OF + help + This selects Hardware reset support aka pwrseq-emmc for eMMC + devices. By default this option is set to y. + + This driver can also be built as a module. If so, the module + will be called pwrseq_emmc. + +config PWRSEQ_SD8787 + tristate "HW reset support for SD8787 BT + Wifi module" + depends on OF + help + This selects hardware reset support for the SD8787 BT + Wifi + module. By default this option is set to n. + + This driver can also be built as a module. If so, the module + will be called pwrseq_sd8787. + +config PWRSEQ_SIMPLE + tristate "Simple HW reset support" + default y + depends on OF + help + This selects simple hardware reset support aka pwrseq-simple. + By default this option is set to y. + + This driver can also be built as a module. If so, the module + will be called pwrseq_simple. + endif diff --git a/drivers/power/pwrseq/Makefile b/drivers/power/pwrseq/Makefile index 108429ff6445..6f359d228843 100644 --- a/drivers/power/pwrseq/Makefile +++ b/drivers/power/pwrseq/Makefile @@ -4,3 +4,7 @@ # obj-$(CONFIG_PWRSEQ) += core.o + +obj-$(CONFIG_PWRSEQ_EMMC) += pwrseq_emmc.o +obj-$(CONFIG_PWRSEQ_SD8787) += pwrseq_sd8787.o +obj-$(CONFIG_PWRSEQ_SIMPLE) += pwrseq_simple.o diff --git a/drivers/power/pwrseq/pwrseq_emmc.c b/drivers/power/pwrseq/pwrseq_emmc.c new file mode 100644 index 000000000000..954bbb44979d --- /dev/null +++ b/drivers/power/pwrseq/pwrseq_emmc.c @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2015, Samsung Electronics Co., Ltd. + * + * Author: Marek Szyprowski + * + * Simple eMMC hardware reset provider + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct pwrseq_emmc { + struct notifier_block reset_nb; + struct gpio_desc *reset_gpio; +}; + +static void pwrseq_ereset(struct pwrseq *pwrseq) +{ + struct pwrseq_emmc *pwrseq_emmc = pwrseq_get_drvdata(pwrseq); + + gpiod_set_value_cansleep(pwrseq_emmc->reset_gpio, 1); + udelay(1); + gpiod_set_value_cansleep(pwrseq_emmc->reset_gpio, 0); + udelay(200); +} + +static int pwrseq_ereset_nb(struct notifier_block *this, + unsigned long mode, void *cmd) +{ + struct pwrseq_emmc *pwrseq_emmc = container_of(this, + struct pwrseq_emmc, reset_nb); + gpiod_set_value(pwrseq_emmc->reset_gpio, 1); + udelay(1); + gpiod_set_value(pwrseq_emmc->reset_gpio, 0); + udelay(200); + + return NOTIFY_DONE; +} + +static const struct pwrseq_ops pwrseq_eops = { + .reset = pwrseq_ereset, +}; + +static int pwrseq_eprobe(struct platform_device *pdev) +{ + struct pwrseq_emmc *pwrseq_emmc; + struct pwrseq *pwrseq; + struct pwrseq_provider *provider; + struct device *dev = &pdev->dev; + + pwrseq_emmc = devm_kzalloc(dev, sizeof(*pwrseq_emmc), GFP_KERNEL); + if (!pwrseq_emmc) + return -ENOMEM; + + pwrseq_emmc->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(pwrseq_emmc->reset_gpio)) + return PTR_ERR(pwrseq_emmc->reset_gpio); + + if (!gpiod_cansleep(pwrseq_emmc->reset_gpio)) { + /* + * register reset handler to ensure emmc reset also from + * emergency_reboot(), priority 255 is the highest priority + * so it will be executed before any system reboot handler. + */ + pwrseq_emmc->reset_nb.notifier_call = pwrseq_ereset_nb; + pwrseq_emmc->reset_nb.priority = 255; + register_restart_handler(&pwrseq_emmc->reset_nb); + } else { + dev_notice(dev, "EMMC reset pin tied to a sleepy GPIO driver; reset on emergency-reboot disabled\n"); + } + + platform_set_drvdata(pdev, pwrseq_emmc); + + pwrseq = devm_pwrseq_create(dev, &pwrseq_eops); + if (IS_ERR(pwrseq)) + return PTR_ERR(pwrseq); + + pwrseq_set_drvdata(pwrseq, pwrseq_emmc); + + provider = devm_of_pwrseq_provider_register(dev, of_pwrseq_xlate_single, pwrseq); + + return PTR_ERR_OR_ZERO(provider); +} + +static int pwrseq_eremove(struct platform_device *pdev) +{ + struct pwrseq_emmc *pwrseq_emmc = platform_get_drvdata(pdev); + + unregister_restart_handler(&pwrseq_emmc->reset_nb); + + return 0; +} + +static const struct of_device_id pwrseq_eof_match[] = { + { .compatible = "mmc-pwrseq-emmc",}, + {/* sentinel */}, +}; + +MODULE_DEVICE_TABLE(of, pwrseq_eof_match); + +static struct platform_driver pwrseq_edriver = { + .probe = pwrseq_eprobe, + .remove = pwrseq_eremove, + .driver = { + .name = "pwrseq_emmc", + .of_match_table = pwrseq_eof_match, + }, +}; + +module_platform_driver(pwrseq_edriver); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/power/pwrseq/pwrseq_sd8787.c b/drivers/power/pwrseq/pwrseq_sd8787.c new file mode 100644 index 000000000000..aeb80327f40d --- /dev/null +++ b/drivers/power/pwrseq/pwrseq_sd8787.c @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * pwrseq_sd8787.c - power sequence support for Marvell SD8787 BT + Wifi chip + * + * Copyright (C) 2016 Matt Ranostay + * + * Based on the original work pwrseq_sd8787.c + * Copyright (C) 2014 Linaro Ltd + * Author: Ulf Hansson + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +struct pwrseq_sd8787 { + struct gpio_desc *reset_gpio; + struct gpio_desc *pwrdn_gpio; + u32 reset_pwrdwn_delay_ms; +}; + +static int pwrseq_sd8787_pre_power_on(struct pwrseq *pwrseq) +{ + struct pwrseq_sd8787 *pwrseq_sd8787 = pwrseq_get_drvdata(pwrseq); + + gpiod_set_value_cansleep(pwrseq_sd8787->reset_gpio, 1); + + msleep(pwrseq_sd8787->reset_pwrdwn_delay_ms); + gpiod_set_value_cansleep(pwrseq_sd8787->pwrdn_gpio, 1); + + return 0; +} + +static void pwrseq_sd8787_power_off(struct pwrseq *pwrseq) +{ + struct pwrseq_sd8787 *pwrseq_sd8787 = pwrseq_get_drvdata(pwrseq); + + gpiod_set_value_cansleep(pwrseq_sd8787->pwrdn_gpio, 0); + gpiod_set_value_cansleep(pwrseq_sd8787->reset_gpio, 0); +} + +static const struct pwrseq_ops pwrseq_sd8787_ops = { + .pre_power_on = pwrseq_sd8787_pre_power_on, + .power_off = pwrseq_sd8787_power_off, +}; + +static const u32 sd8787_delay_ms = 300; +static const u32 wilc1000_delay_ms = 5; + +static const struct of_device_id pwrseq_sd8787_of_match[] = { + { .compatible = "mmc-pwrseq-sd8787", .data = &sd8787_delay_ms }, + { .compatible = "mmc-pwrseq-wilc1000", .data = &wilc1000_delay_ms }, + {/* sentinel */}, +}; +MODULE_DEVICE_TABLE(of, pwrseq_sd8787_of_match); + +static int pwrseq_sd8787_probe(struct platform_device *pdev) +{ + struct pwrseq_sd8787 *pwrseq_sd8787; + struct pwrseq *pwrseq; + struct pwrseq_provider *provider; + struct device *dev = &pdev->dev; + + pwrseq_sd8787 = devm_kzalloc(dev, sizeof(*pwrseq_sd8787), GFP_KERNEL); + if (!pwrseq_sd8787) + return -ENOMEM; + + pwrseq_sd8787->reset_pwrdwn_delay_ms = *(u32 *)of_device_get_match_data(dev); + + pwrseq_sd8787->pwrdn_gpio = devm_gpiod_get(dev, "powerdown", GPIOD_OUT_LOW); + if (IS_ERR(pwrseq_sd8787->pwrdn_gpio)) + return PTR_ERR(pwrseq_sd8787->pwrdn_gpio); + + pwrseq_sd8787->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(pwrseq_sd8787->reset_gpio)) + return PTR_ERR(pwrseq_sd8787->reset_gpio); + + pwrseq = devm_pwrseq_create(dev, &pwrseq_sd8787_ops); + if (IS_ERR(pwrseq)) + return PTR_ERR(pwrseq); + + pwrseq_set_drvdata(pwrseq, pwrseq_sd8787); + + provider = devm_of_pwrseq_provider_register(dev, of_pwrseq_xlate_single, pwrseq); + + return PTR_ERR_OR_ZERO(provider); +} + +static struct platform_driver pwrseq_sd8787_driver = { + .probe = pwrseq_sd8787_probe, + .driver = { + .name = "pwrseq_sd8787", + .of_match_table = pwrseq_sd8787_of_match, + }, +}; + +module_platform_driver(pwrseq_sd8787_driver); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/power/pwrseq/pwrseq_simple.c b/drivers/power/pwrseq/pwrseq_simple.c new file mode 100644 index 000000000000..4889fd5a11e0 --- /dev/null +++ b/drivers/power/pwrseq/pwrseq_simple.c @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2014 Linaro Ltd + * + * Author: Ulf Hansson + * + * Simple MMC power sequence management + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct pwrseq_simple { + bool clk_enabled; + u32 post_power_on_delay_ms; + u32 power_off_delay_us; + struct clk *ext_clk; + struct gpio_descs *reset_gpios; +}; + +static int pwrseq_simple_set_gpios_value(struct pwrseq_simple *pwrseq_simple, + int value) +{ + struct gpio_descs *reset_gpios = pwrseq_simple->reset_gpios; + unsigned long *values; + int nvalues; + int ret; + + if (IS_ERR(reset_gpios)) + return PTR_ERR(reset_gpios); + + nvalues = reset_gpios->ndescs; + + values = bitmap_alloc(nvalues, GFP_KERNEL); + if (!values) + return -ENOMEM; + + if (value) + bitmap_fill(values, nvalues); + else + bitmap_zero(values, nvalues); + + ret = gpiod_set_array_value_cansleep(nvalues, reset_gpios->desc, + reset_gpios->info, values); + kfree(values); + + return ret; +} + +static int pwrseq_simple_pre_power_on(struct pwrseq *pwrseq) +{ + struct pwrseq_simple *pwrseq_simple = pwrseq_get_drvdata(pwrseq); + + if (!IS_ERR(pwrseq_simple->ext_clk) && !pwrseq_simple->clk_enabled) { + clk_prepare_enable(pwrseq_simple->ext_clk); + pwrseq_simple->clk_enabled = true; + } + + return pwrseq_simple_set_gpios_value(pwrseq_simple, 1); +} + +static int pwrseq_simple_power_on(struct pwrseq *pwrseq) +{ + struct pwrseq_simple *pwrseq_simple = pwrseq_get_drvdata(pwrseq); + int ret; + + ret = pwrseq_simple_set_gpios_value(pwrseq_simple, 0); + if (ret) + return ret; + + if (pwrseq_simple->post_power_on_delay_ms) + msleep(pwrseq_simple->post_power_on_delay_ms); + + return 0; +} + +static void pwrseq_simple_power_off(struct pwrseq *pwrseq) +{ + struct pwrseq_simple *pwrseq_simple = pwrseq_get_drvdata(pwrseq); + + pwrseq_simple_set_gpios_value(pwrseq_simple, 1); + + if (pwrseq_simple->power_off_delay_us) + usleep_range(pwrseq_simple->power_off_delay_us, + 2 * pwrseq_simple->power_off_delay_us); + + if (!IS_ERR(pwrseq_simple->ext_clk) && pwrseq_simple->clk_enabled) { + clk_disable_unprepare(pwrseq_simple->ext_clk); + pwrseq_simple->clk_enabled = false; + } +} + +static const struct pwrseq_ops pwrseq_simple_ops = { + .pre_power_on = pwrseq_simple_pre_power_on, + .power_on = pwrseq_simple_power_on, + .power_off = pwrseq_simple_power_off, +}; + +static const struct of_device_id pwrseq_simple_of_match[] = { + { .compatible = "mmc-pwrseq-simple",}, /* MMC-specific compatible */ + {/* sentinel */}, +}; +MODULE_DEVICE_TABLE(of, pwrseq_simple_of_match); + +static int pwrseq_simple_probe(struct platform_device *pdev) +{ + struct pwrseq_simple *pwrseq_simple; + struct pwrseq *pwrseq; + struct pwrseq_provider *provider; + struct device *dev = &pdev->dev; + + pwrseq_simple = devm_kzalloc(dev, sizeof(*pwrseq_simple), GFP_KERNEL); + if (!pwrseq_simple) + return -ENOMEM; + + pwrseq_simple->ext_clk = devm_clk_get(dev, "ext_clock"); + if (IS_ERR(pwrseq_simple->ext_clk) && PTR_ERR(pwrseq_simple->ext_clk) != -ENOENT) + return PTR_ERR(pwrseq_simple->ext_clk); + + pwrseq_simple->reset_gpios = devm_gpiod_get_array(dev, "reset", + GPIOD_OUT_HIGH); + if (IS_ERR(pwrseq_simple->reset_gpios) && + PTR_ERR(pwrseq_simple->reset_gpios) != -ENOENT && + PTR_ERR(pwrseq_simple->reset_gpios) != -ENOSYS) { + return PTR_ERR(pwrseq_simple->reset_gpios); + } + + device_property_read_u32(dev, "post-power-on-delay-ms", + &pwrseq_simple->post_power_on_delay_ms); + device_property_read_u32(dev, "power-off-delay-us", + &pwrseq_simple->power_off_delay_us); + + pwrseq = devm_pwrseq_create(dev, &pwrseq_simple_ops); + if (IS_ERR(pwrseq)) + return PTR_ERR(pwrseq); + + pwrseq_set_drvdata(pwrseq, pwrseq_simple); + + provider = devm_of_pwrseq_provider_register(dev, of_pwrseq_xlate_single, pwrseq); + + return PTR_ERR_OR_ZERO(provider); +} + +static struct platform_driver pwrseq_simple_driver = { + .probe = pwrseq_simple_probe, + .driver = { + .name = "pwrseq_simple", + .of_match_table = pwrseq_simple_of_match, + }, +}; + +module_platform_driver(pwrseq_simple_driver); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/pwrseq/driver.h b/include/linux/pwrseq/driver.h index bdb8a25a8504..0ca1d0311ab6 100644 --- a/include/linux/pwrseq/driver.h +++ b/include/linux/pwrseq/driver.h @@ -57,7 +57,7 @@ struct pwrseq *__devm_pwrseq_create(struct device *dev, struct module *owner, co * * Return: created instance or the wrapped error code. */ -#define pwrseq_create(dev, ops, data) __pwrseq_create((dev), THIS_MODULE, (ops)) +#define pwrseq_create(dev, ops) __pwrseq_create((dev), THIS_MODULE, (ops)) /** * devm_pwrseq_create() - devres-managed version of pwrseq_create @@ -71,7 +71,7 @@ struct pwrseq *__devm_pwrseq_create(struct device *dev, struct module *owner, co * * Return: created instance or the wrapped error code. */ -#define devm_pwrseq_create(dev, ops, data) __devm_pwrseq_create((dev), THIS_MODULE, (ops)) +#define devm_pwrseq_create(dev, ops) __devm_pwrseq_create((dev), THIS_MODULE, (ops)) void pwrseq_destroy(struct pwrseq *pwrseq);