@@ -9,7 +9,6 @@ mmc_core-y := core.o bus.o host.o \
sdio.o sdio_ops.o sdio_bus.o \
sdio_cis.o sdio_io.o sdio_irq.o \
slot-gpio.o regulator.o
-mmc_core-$(CONFIG_OF) += pwrseq.o
mmc_core-$(CONFIG_DEBUG_FS) += debugfs.o
obj-$(CONFIG_MMC_BLOCK) += mmc_block.o
mmc_block-objs := block.o queue.o
@@ -41,7 +41,6 @@
#include "bus.h"
#include "host.h"
#include "sdio_bus.h"
-#include "pwrseq.h"
#include "mmc_ops.h"
#include "sd_ops.h"
@@ -1322,7 +1321,7 @@ void mmc_power_up(struct mmc_host *host, u32 ocr)
if (host->ios.power_mode == MMC_POWER_ON)
return;
- mmc_pwrseq_pre_power_on(host);
+ pwrseq_pre_power_on(host->pwrseq);
host->ios.vdd = fls(ocr) - 1;
host->ios.power_mode = MMC_POWER_UP;
@@ -1337,7 +1336,7 @@ void mmc_power_up(struct mmc_host *host, u32 ocr)
*/
mmc_delay(host->ios.power_delay_ms);
- mmc_pwrseq_post_power_on(host);
+ pwrseq_power_on(host->pwrseq);
host->ios.clock = host->f_init;
@@ -1356,7 +1355,7 @@ void mmc_power_off(struct mmc_host *host)
if (host->ios.power_mode == MMC_POWER_OFF)
return;
- mmc_pwrseq_power_off(host);
+ pwrseq_power_off(host->pwrseq);
host->ios.clock = 0;
host->ios.vdd = 0;
@@ -1986,7 +1985,7 @@ EXPORT_SYMBOL(mmc_set_blocklen);
static void mmc_hw_reset_for_init(struct mmc_host *host)
{
- mmc_pwrseq_reset(host);
+ pwrseq_reset(host->pwrseq);
if (!(host->caps & MMC_CAP_HW_RESET) || !host->ops->hw_reset)
return;
@@ -28,7 +28,6 @@
#include "crypto.h"
#include "host.h"
#include "slot-gpio.h"
-#include "pwrseq.h"
#include "sdio_ops.h"
#define cls_dev_to_mmc_host(d) container_of(d, struct mmc_host, class_dev)
@@ -422,7 +421,11 @@ int mmc_of_parse(struct mmc_host *host)
device_property_read_u32(dev, "post-power-on-delay-ms",
&host->ios.power_delay_ms);
- return mmc_pwrseq_alloc(host);
+ host->pwrseq = devm_pwrseq_get(dev, "mmc");
+ if (IS_ERR(host->pwrseq))
+ return PTR_ERR(host->pwrseq);
+
+ return 0;
}
EXPORT_SYMBOL(mmc_of_parse);
@@ -641,7 +644,6 @@ EXPORT_SYMBOL(mmc_remove_host);
*/
void mmc_free_host(struct mmc_host *host)
{
- mmc_pwrseq_free(host);
put_device(&host->class_dev);
}
@@ -24,7 +24,6 @@
#include "mmc_ops.h"
#include "quirks.h"
#include "sd_ops.h"
-#include "pwrseq.h"
#define DEFAULT_CMD6_TIMEOUT_MS 500
#define MIN_CACHE_EN_TIMEOUT_MS 1600
@@ -2222,7 +2221,7 @@ static int _mmc_hw_reset(struct mmc_host *host)
} else {
/* Do a brute force power cycle */
mmc_power_cycle(host, card->ocr);
- mmc_pwrseq_reset(host);
+ pwrseq_reset(host->pwrseq);
}
return mmc_init_card(host, card->ocr, card);
}
deleted file mode 100644
@@ -1,117 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Linaro Ltd
- *
- * Author: Ulf Hansson <ulf.hansson@linaro.org>
- *
- * MMC power sequence management
- */
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/of.h>
-
-#include <linux/mmc/host.h>
-
-#include "pwrseq.h"
-
-static DEFINE_MUTEX(pwrseq_list_mutex);
-static LIST_HEAD(pwrseq_list);
-
-int mmc_pwrseq_alloc(struct mmc_host *host)
-{
- struct device_node *np;
- struct mmc_pwrseq *p;
-
- np = of_parse_phandle(host->parent->of_node, "mmc-pwrseq", 0);
- if (!np)
- return 0;
-
- mutex_lock(&pwrseq_list_mutex);
- list_for_each_entry(p, &pwrseq_list, pwrseq_node) {
- if (p->dev->of_node == np) {
- if (!try_module_get(p->owner))
- dev_err(host->parent,
- "increasing module refcount failed\n");
- else
- host->pwrseq = p;
-
- break;
- }
- }
-
- of_node_put(np);
- mutex_unlock(&pwrseq_list_mutex);
-
- if (!host->pwrseq)
- return -EPROBE_DEFER;
-
- dev_info(host->parent, "allocated mmc-pwrseq\n");
-
- return 0;
-}
-
-void mmc_pwrseq_pre_power_on(struct mmc_host *host)
-{
- struct mmc_pwrseq *pwrseq = host->pwrseq;
-
- if (pwrseq && pwrseq->ops->pre_power_on)
- pwrseq->ops->pre_power_on(host);
-}
-
-void mmc_pwrseq_post_power_on(struct mmc_host *host)
-{
- struct mmc_pwrseq *pwrseq = host->pwrseq;
-
- if (pwrseq && pwrseq->ops->post_power_on)
- pwrseq->ops->post_power_on(host);
-}
-
-void mmc_pwrseq_power_off(struct mmc_host *host)
-{
- struct mmc_pwrseq *pwrseq = host->pwrseq;
-
- if (pwrseq && pwrseq->ops->power_off)
- pwrseq->ops->power_off(host);
-}
-
-void mmc_pwrseq_reset(struct mmc_host *host)
-{
- struct mmc_pwrseq *pwrseq = host->pwrseq;
-
- if (pwrseq && pwrseq->ops->reset)
- pwrseq->ops->reset(host);
-}
-
-void mmc_pwrseq_free(struct mmc_host *host)
-{
- struct mmc_pwrseq *pwrseq = host->pwrseq;
-
- if (pwrseq) {
- module_put(pwrseq->owner);
- host->pwrseq = NULL;
- }
-}
-
-int mmc_pwrseq_register(struct mmc_pwrseq *pwrseq)
-{
- if (!pwrseq || !pwrseq->ops || !pwrseq->dev)
- return -EINVAL;
-
- mutex_lock(&pwrseq_list_mutex);
- list_add(&pwrseq->pwrseq_node, &pwrseq_list);
- mutex_unlock(&pwrseq_list_mutex);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(mmc_pwrseq_register);
-
-void mmc_pwrseq_unregister(struct mmc_pwrseq *pwrseq)
-{
- if (pwrseq) {
- mutex_lock(&pwrseq_list_mutex);
- list_del(&pwrseq->pwrseq_node);
- mutex_unlock(&pwrseq_list_mutex);
- }
-}
-EXPORT_SYMBOL_GPL(mmc_pwrseq_unregister);
deleted file mode 100644
@@ -1,58 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2014 Linaro Ltd
- *
- * Author: Ulf Hansson <ulf.hansson@linaro.org>
- */
-#ifndef _MMC_CORE_PWRSEQ_H
-#define _MMC_CORE_PWRSEQ_H
-
-#include <linux/types.h>
-
-struct mmc_host;
-struct device;
-struct module;
-
-struct mmc_pwrseq_ops {
- void (*pre_power_on)(struct mmc_host *host);
- void (*post_power_on)(struct mmc_host *host);
- void (*power_off)(struct mmc_host *host);
- void (*reset)(struct mmc_host *host);
-};
-
-struct mmc_pwrseq {
- const struct mmc_pwrseq_ops *ops;
- struct device *dev;
- struct list_head pwrseq_node;
- struct module *owner;
-};
-
-#ifdef CONFIG_OF
-
-int mmc_pwrseq_register(struct mmc_pwrseq *pwrseq);
-void mmc_pwrseq_unregister(struct mmc_pwrseq *pwrseq);
-
-int mmc_pwrseq_alloc(struct mmc_host *host);
-void mmc_pwrseq_pre_power_on(struct mmc_host *host);
-void mmc_pwrseq_post_power_on(struct mmc_host *host);
-void mmc_pwrseq_power_off(struct mmc_host *host);
-void mmc_pwrseq_reset(struct mmc_host *host);
-void mmc_pwrseq_free(struct mmc_host *host);
-
-#else
-
-static inline int mmc_pwrseq_register(struct mmc_pwrseq *pwrseq)
-{
- return -ENOSYS;
-}
-static inline void mmc_pwrseq_unregister(struct mmc_pwrseq *pwrseq) {}
-static inline int mmc_pwrseq_alloc(struct mmc_host *host) { return 0; }
-static inline void mmc_pwrseq_pre_power_on(struct mmc_host *host) {}
-static inline void mmc_pwrseq_post_power_on(struct mmc_host *host) {}
-static inline void mmc_pwrseq_power_off(struct mmc_host *host) {}
-static inline void mmc_pwrseq_reset(struct mmc_host *host) {}
-static inline void mmc_pwrseq_free(struct mmc_host *host) {}
-
-#endif
-
-#endif
@@ -68,6 +68,14 @@ static struct pwrseq *_of_pwrseq_get(struct device *dev, const char *id)
snprintf(prop_name, sizeof(prop_name), "%s-pwrseq", id);
ret = of_parse_phandle_with_args(dev->of_node, prop_name, "#pwrseq-cells", 0, &args);
+
+ /*
+ * Parsing failed. Try locating old bindings for mmc-pwrseq, which did
+ * not use #pwrseq-cells.
+ */
+ if (ret == -EINVAL && !strcmp(id, "mmc"))
+ ret = of_parse_phandle_with_args(dev->of_node, prop_name, NULL, 0, &args);
+
if (ret == -ENOENT)
return NULL;
else if (ret < 0)
@@ -16,6 +16,7 @@
#include <linux/mmc/pm.h>
#include <linux/dma-direction.h>
#include <linux/keyslot-manager.h>
+#include <linux/pwrseq/consumer.h>
struct mmc_ios {
unsigned int clock; /* clock rate */
@@ -278,7 +279,6 @@ struct mmc_context_info {
};
struct regulator;
-struct mmc_pwrseq;
struct mmc_supply {
struct regulator *vmmc; /* Card power supply */
@@ -294,7 +294,7 @@ struct mmc_host {
struct device class_dev;
int index;
const struct mmc_host_ops *ops;
- struct mmc_pwrseq *pwrseq;
+ struct pwrseq *pwrseq;
unsigned int f_min;
unsigned int f_max;
unsigned int f_init;
Drop old MMC pwrseq code and use new pwrseq subsystem instead. Individual drivers are already ported to new subsystem. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/mmc/core/Makefile | 1 - drivers/mmc/core/core.c | 9 ++- drivers/mmc/core/host.c | 8 ++- drivers/mmc/core/mmc.c | 3 +- drivers/mmc/core/pwrseq.c | 117 ------------------------------------ drivers/mmc/core/pwrseq.h | 58 ------------------ drivers/power/pwrseq/core.c | 8 +++ include/linux/mmc/host.h | 4 +- 8 files changed, 20 insertions(+), 188 deletions(-) delete mode 100644 drivers/mmc/core/pwrseq.c delete mode 100644 drivers/mmc/core/pwrseq.h