From patchwork Wed Dec 1 20:51:03 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Florian Fainelli X-Patchwork-Id: 12651049 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 7F240C433EF for ; Wed, 1 Dec 2021 20:53:45 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1353355AbhLAU46 (ORCPT ); Wed, 1 Dec 2021 15:56:58 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:50672 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1353207AbhLAUzP (ORCPT ); Wed, 1 Dec 2021 15:55:15 -0500 Received: from mail-pg1-x52c.google.com (mail-pg1-x52c.google.com [IPv6:2607:f8b0:4864:20::52c]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 523F0C061574; Wed, 1 Dec 2021 12:51:53 -0800 (PST) Received: by mail-pg1-x52c.google.com with SMTP id m15so24861552pgu.11; Wed, 01 Dec 2021 12:51:53 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=GdmpBt4ZMaQPlphX/YwHQCI3dJfnkXTHjhvZr2zwqGI=; b=mA5gNYgQjHOsA/42VuhtN8dwIDpMsZCTfSyP3+oTfuZkTP9Eh2RLeOpJxiZkaAslfM MGttHUKWuasYkEnvsrRYsCXMgS26a1vEvWoWr+5oMgUL+/fo5lBqHNgJC7j0zmTn+gZZ 6pl6wEB9J+yw01ClXgV/u4bUfYhfKbOnbfeiQ0mWJWBPG14qOEbivhSmpG2ZtzAZlVLy LpD6u0/61ghzHrDXgOcj2ZNOQL16rf9IbBzdHePA/VoXXMh1c/eDQZgt7EveOYvgDrGi QfXJFG3uYxw6I6JzdzrH9t7gSYm/6euZ7Yxx9ZR0b6YW73k2hqLcTlf4WUELAYmomiz3 +PFg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=GdmpBt4ZMaQPlphX/YwHQCI3dJfnkXTHjhvZr2zwqGI=; b=D9BvCqeo2U833cB52kufU0P7qdBdQRUmg8y1afhFlL6yrhzoWRXrlMCqiM6+Ilh1FX TP/620GCzJr5nNTLdKYSj7f3yxzhftVXEMObtlwwUkbESfhCL5KAVpamuxUqtcnVcw+2 xPM12jycccFAfv7cFl+v/HuenioVH+k3+976+p/EvQmhgP/RyKRjI+WAI88xhq7DmL80 ntfzcwuGtVt1M/5AddOZaXQ9GkHSoA0iCxE4DNGAeXquxXfL1unyNpGNDieKlOZnOKIH gXIb44t9vNAcCR9Ci/E3of4GuKf8uGFLlfTcet3wnEzioXgygZK42rmNKYPuioEjvZpp NO+w== X-Gm-Message-State: AOAM5319NX5g9Ao9RfykaaYVdGRqXxAOHIYSK4D42lTUcRTdWl/p8UFV LDJ2JtNP5wCR6F1j5u8foX9BaRqlPA4= X-Google-Smtp-Source: ABdhPJy3iQxxjxCAI1LN4YwbWIk+vv2mASskJumumarNaJb8fgQIIsq4PEeD75P4CL31rTFEUQ7SGw== X-Received: by 2002:a05:6a00:a8b:b0:44d:ef7c:94b9 with SMTP id b11-20020a056a000a8b00b0044def7c94b9mr8512534pfl.36.1638391912387; Wed, 01 Dec 2021 12:51:52 -0800 (PST) Received: from fainelli-desktop.igp.broadcom.net ([192.19.223.252]) by smtp.gmail.com with ESMTPSA id p20sm729117pfw.96.2021.12.01.12.51.50 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 01 Dec 2021 12:51:51 -0800 (PST) From: Florian Fainelli To: devicetree@vger.kernel.org Cc: Florian Fainelli , Damien Le Moal , Rob Herring , Linus Walleij , Bartosz Golaszewski , bcm-kernel-feedback-list@broadcom.com (maintainer:BROADCOM BCM7XXX ARM ARCHITECTURE), Gregory Fong , Thomas Gleixner , Marc Zyngier , Ulf Hansson , Thierry Reding , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Lee Jones , Philipp Zabel , Matt Mackall , Herbert Xu , Ray Jui , Scott Branden , Alessandro Zummo , Alexandre Belloni , "Rafael J. Wysocki" , Daniel Lezcano , Amit Kucheria , Zhang Rui , Markus Mayer , Greg Kroah-Hartman , Al Cooper , Doug Berger , linux-ide@vger.kernel.org (open list:LIBATA SUBSYSTEM (Serial and Parallel ATA drivers)), linux-kernel@vger.kernel.org (open list), linux-gpio@vger.kernel.org (open list:GPIO SUBSYSTEM), linux-arm-kernel@lists.infradead.org (moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE), linux-mmc@vger.kernel.org (open list:MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND...), linux-pwm@vger.kernel.org (open list:PWM SUBSYSTEM), linux-crypto@vger.kernel.org (open list:HARDWARE RANDOM NUMBER GENERATOR CORE), linux-rtc@vger.kernel.org (open list:REAL TIME CLOCK (RTC) SUBSYSTEM), linux-pm@vger.kernel.org (open list:THERMAL), linux-usb@vger.kernel.org (open list:USB SUBSYSTEM) Subject: [PATCH 07/14] dt-bindings: interrupt-controller: Convert BCM7120 L2 to YAML Date: Wed, 1 Dec 2021 12:51:03 -0800 Message-Id: <20211201205110.41656-8-f.fainelli@gmail.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20211201205110.41656-1-f.fainelli@gmail.com> References: <20211201205110.41656-1-f.fainelli@gmail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org Convert the Broadcom BCM7120 Level 2 interrupt controller Device Tree binding to YAML to help with validation. Signed-off-by: Florian Fainelli --- .../brcm,bcm7120-l2-intc.txt | 88 ------------- .../brcm,bcm7120-l2-intc.yaml | 123 ++++++++++++++++++ 2 files changed, 123 insertions(+), 88 deletions(-) delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt deleted file mode 100644 index addd86b6ca2f..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt +++ /dev/null @@ -1,88 +0,0 @@ -Broadcom BCM7120-style Level 2 interrupt controller - -This interrupt controller hardware is a second level interrupt controller that -is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based -platforms. It can be found on BCM7xxx products starting with BCM7120. - -Such an interrupt controller has the following hardware design: - -- outputs multiple interrupts signals towards its interrupt controller parent - -- controls how some of the interrupts will be flowing, whether they will - directly output an interrupt signal towards the interrupt controller parent, - or if they will output an interrupt signal at this 2nd level interrupt - controller, in particular for UARTs - -- has one 32-bit enable word and one 32-bit status word - -- no atomic set/clear operations - -- not all bits within the interrupt controller actually map to an interrupt - -The typical hardware layout for this controller is represented below: - -2nd level interrupt line Outputs for the parent controller (e.g: ARM GIC) - -0 -----[ MUX ] ------------|==========> GIC interrupt 75 - \-----------\ - | -1 -----[ MUX ] --------)---|==========> GIC interrupt 76 - \------------| - | -2 -----[ MUX ] --------)---|==========> GIC interrupt 77 - \------------| - | -3 ---------------------| -4 ---------------------| -5 ---------------------| -7 ---------------------|---|===========> GIC interrupt 66 -9 ---------------------| -10 --------------------| -11 --------------------/ - -6 ------------------------\ - |===========> GIC interrupt 64 -8 ------------------------/ - -12 ........................ X -13 ........................ X (not connected) -.. -31 ........................ X - -Required properties: - -- compatible: should be "brcm,bcm7120-l2-intc" -- reg: specifies the base physical address and size of the registers -- interrupt-controller: identifies the node as an interrupt controller -- #interrupt-cells: specifies the number of cells needed to encode an interrupt - source, should be 1. -- interrupts: specifies the interrupt line(s) in the interrupt-parent controller - node, valid values depend on the type of parent interrupt controller -- brcm,int-map-mask: 32-bits bit mask describing how many and which interrupts - are wired to this 2nd level interrupt controller, and how they match their - respective interrupt parents. Should match exactly the number of interrupts - specified in the 'interrupts' property. - -Optional properties: - -- brcm,irq-can-wake: if present, this means the L2 controller can be used as a - wakeup source for system suspend/resume. - -- brcm,int-fwd-mask: if present, a bit mask to configure the interrupts which - have a mux gate, typically UARTs. Setting these bits will make their - respective interrupt outputs bypass this 2nd level interrupt controller - completely; it is completely transparent for the interrupt controller - parent. This should have one 32-bit word per enable/status pair. - -Example: - -irq0_intc: interrupt-controller@f0406800 { - compatible = "brcm,bcm7120-l2-intc"; - interrupt-parent = <&intc>; - #interrupt-cells = <1>; - reg = <0xf0406800 0x8>; - interrupt-controller; - interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>; - brcm,int-map-mask = <0xeb8>, <0x140>; - brcm,int-fwd-mask = <0x7>; -}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml new file mode 100644 index 000000000000..e0c6dce40d13 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7120-l2-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM7120-style Level 2 interrupt controller + +maintainers: + - Florian Fainelli + +description: > + This interrupt controller hardware is a second level interrupt controller that + is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based + platforms. It can be found on BCM7xxx products starting with BCM7120. + + Such an interrupt controller has the following hardware design: + + - outputs multiple interrupts signals towards its interrupt controller parent + + - controls how some of the interrupts will be flowing, whether they will + directly output an interrupt signal towards the interrupt controller parent, + or if they will output an interrupt signal at this 2nd level interrupt + controller, in particular for UARTs + + - has one 32-bit enable word and one 32-bit status word + + - no atomic set/clear operations + + - not all bits within the interrupt controller actually map to an interrupt + + The typical hardware layout for this controller is represented below: + + 2nd level interrupt line Outputs for the parent controller (e.g: ARM GIC) + + 0 -----[ MUX ] ------------|==========> GIC interrupt 75 + \-----------\ + | + 1 -----[ MUX ] --------)---|==========> GIC interrupt 76 + \------------| + | + 2 -----[ MUX ] --------)---|==========> GIC interrupt 77 + \------------| + | + 3 ---------------------| + 4 ---------------------| + 5 ---------------------| + 7 ---------------------|---|===========> GIC interrupt 66 + 9 ---------------------| + 10 --------------------| + 11 --------------------/ + + 6 ------------------------\ + |===========> GIC interrupt 64 + 8 ------------------------/ + + 12 ........................ X + 13 ........................ X (not connected) + .. + 31 ........................ X + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + const: brcm,bcm7120-l2-intc + + reg: + description: > + Specifies the base physical address and size of the registers + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + interrupts: true + + "brcm,int-map-mask": + $ref: /schemas/types.yaml#/definitions/uint32-array + description: > + 32-bits bit mask describing how many and which interrupts are wired to + this 2nd level interrupt controller, and how they match their respective + interrupt parents. Should match exactly the number of interrupts + specified in the 'interrupts' property. + + brcm,irq-can-wake: + type: boolean + description: > + If present, this means the L2 controller can be used as a wakeup source + for system suspend/resume. + + brcm,int-fwd-mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + if present, a bit mask to configure the interrupts which have a mux gate, + typically UARTs. Setting these bits will make their respective interrupt + outputs bypass this 2nd level interrupt controller completely; it is + completely transparent for the interrupt controller parent. This should + have one 32-bit word per enable/status pair. + +additionalProperties: false + +required: + - compatible + - reg + - interrupt-controller + - "#interrupt-cells" + - interrupts + +examples: + - | + irq0_intc: interrupt-controller@f0406800 { + compatible = "brcm,bcm7120-l2-intc"; + interrupt-parent = <&intc>; + #interrupt-cells = <1>; + reg = <0xf0406800 0x8>; + interrupt-controller; + interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>; + brcm,int-map-mask = <0xeb8>, <0x140>; + brcm,int-fwd-mask = <0x7>; + };