@@ -373,6 +373,7 @@ static void sdhci_init(struct sdhci_host *host, int soft)
if (soft) {
/* force clock reconfiguration */
host->clock = 0;
+ host->reinit_uhs = true;
mmc->ops->set_ios(mmc, &mmc->ios);
}
}
@@ -2279,11 +2280,46 @@ void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing)
}
EXPORT_SYMBOL_GPL(sdhci_set_uhs_signaling);
+static bool sdhci_timing_has_preset(unsigned char timing)
+{
+ switch (timing) {
+ case MMC_TIMING_UHS_SDR12:
+ case MMC_TIMING_UHS_SDR25:
+ case MMC_TIMING_UHS_SDR50:
+ case MMC_TIMING_UHS_SDR104:
+ case MMC_TIMING_UHS_DDR50:
+ case MMC_TIMING_MMC_DDR52:
+ return true;
+ };
+ return false;
+}
+
+static bool sdhci_preset_needed(struct sdhci_host *host, unsigned char timing)
+{
+ return !(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN) &&
+ sdhci_timing_has_preset(timing);
+}
+
+static bool sdhci_presetable_values_change(struct sdhci_host *host, struct mmc_ios *ios)
+{
+ /*
+ * Preset Values are: Driver Strength, Clock Generator and SDCLK/RCLK
+ * Frequency. Check if preset values need to be enabled, or the Driver
+ * Strength needs updating. Note, clock changes are handled separately.
+ */
+ return !host->preset_enabled &&
+ (sdhci_preset_needed(host, ios->timing) || host->drv_type != ios->drv_type);
+}
+
void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct sdhci_host *host = mmc_priv(mmc);
+ bool reinit_uhs = host->reinit_uhs;
+ bool turning_on_clk = false;
u8 ctrl;
+ host->reinit_uhs = false;
+
if (ios->power_mode == MMC_POWER_UNDEFINED)
return;
@@ -2309,6 +2345,8 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
sdhci_enable_preset_value(host, false);
if (!ios->clock || ios->clock != host->clock) {
+ turning_on_clk = ios->clock && !host->clock;
+
host->ops->set_clock(host, ios->clock);
host->clock = ios->clock;
@@ -2335,6 +2373,17 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
host->ops->set_bus_width(host, ios->bus_width);
+ /*
+ * Special case to avoid multiple clock changes during voltage
+ * switching.
+ */
+ if (!reinit_uhs &&
+ turning_on_clk &&
+ host->timing == ios->timing &&
+ host->version >= SDHCI_SPEC_300 &&
+ !sdhci_presetable_values_change(host, ios))
+ return;
+
ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
if (!(host->quirks & SDHCI_QUIRK_NO_HISPD_BIT)) {
@@ -2378,6 +2427,7 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
}
sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+ host->drv_type = ios->drv_type;
} else {
/*
* According to SDHC Spec v3.00, if the Preset Value
@@ -2405,19 +2455,14 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
host->ops->set_uhs_signaling(host, ios->timing);
host->timing = ios->timing;
- if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN) &&
- ((ios->timing == MMC_TIMING_UHS_SDR12) ||
- (ios->timing == MMC_TIMING_UHS_SDR25) ||
- (ios->timing == MMC_TIMING_UHS_SDR50) ||
- (ios->timing == MMC_TIMING_UHS_SDR104) ||
- (ios->timing == MMC_TIMING_UHS_DDR50) ||
- (ios->timing == MMC_TIMING_MMC_DDR52))) {
+ if (sdhci_preset_needed(host, ios->timing)) {
u16 preset;
sdhci_enable_preset_value(host, true);
preset = sdhci_get_preset_value(host);
ios->drv_type = FIELD_GET(SDHCI_PRESET_DRV_MASK,
preset);
+ host->drv_type = ios->drv_type;
}
/* Re-enable SD Clock */
@@ -3754,6 +3799,7 @@ int sdhci_resume_host(struct sdhci_host *host)
sdhci_init(host, 0);
host->pwr = 0;
host->clock = 0;
+ host->reinit_uhs = true;
mmc->ops->set_ios(mmc, &mmc->ios);
} else {
sdhci_init(host, (mmc->pm_flags & MMC_PM_KEEP_POWER));
@@ -3816,6 +3862,7 @@ int sdhci_runtime_resume_host(struct sdhci_host *host, int soft_reset)
/* Force clock and power re-program */
host->pwr = 0;
host->clock = 0;
+ host->reinit_uhs = true;
mmc->ops->start_signal_voltage_switch(mmc, &mmc->ios);
mmc->ops->set_ios(mmc, &mmc->ios);
@@ -524,6 +524,8 @@ struct sdhci_host {
unsigned int clock; /* Current clock (MHz) */
u8 pwr; /* Current voltage */
+ u8 drv_type; /* Current UHS-I driver type */
+ bool reinit_uhs; /* Force UHS-related re-initialization */
bool runtime_suspended; /* Host is runtime suspended */
bool bus_on; /* Bus power prevents runtime suspend */
Commit 20b92a30b561 ("mmc: sdhci: update signal voltage switch code") removed voltage switch delays from sdhci because mmc core had been enhanced to support them. However that assumed that sdhci_set_ios() did a single clock change, which it did not, and so the delays in mmc core, which should have come after the first clock change, were not effective. Fix by avoiding re-configuring UHS and preset settings when the clock is turning on and the settings have not changed. That then also avoids the associated clock changes, so that then sdhci_set_ios() does a single clock change when voltage switching, and the mmc core delays become effective. To do that has meant keeping track of driver strength (host->drv_type), and cases of reinitialization (host->reinit_uhs). Note also, the 'turning_on_clk' restriction should not be necessary but is done to minimize the impact of the change on stable kernels. Fixes: 20b92a30b561 ("mmc: sdhci: update signal voltage switch code") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> --- drivers/mmc/host/sdhci.c | 61 +++++++++++++++++++++++++++++++++++----- drivers/mmc/host/sdhci.h | 2 ++ 2 files changed, 56 insertions(+), 7 deletions(-)