@@ -9,19 +9,18 @@ title: Cadence SD/SDIO/eMMC Host Controller (SD4HC)
maintainers:
- Masahiro Yamada <yamada.masahiro@socionext.com>
-allOf:
- - $ref: mmc-controller.yaml
-
properties:
compatible:
items:
- enum:
+ - amd,pensando-elba-sd4hc
- microchip,mpfs-sd4hc
- socionext,uniphier-sd4hc
- const: cdns,sd4hc
reg:
- maxItems: 1
+ minItems: 1
+ maxItems: 2
interrupts:
maxItems: 1
@@ -120,6 +119,26 @@ required:
- interrupts
- clocks
+allOf:
+ - $ref: mmc-controller.yaml
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: amd,pensando-elba-sd4hc
+ then:
+ properties:
+ reg:
+ items:
+ - description: Host controller registers
+ - description: Elba byte-lane enable register for writes
+ required:
+ - resets
+ else:
+ properties:
+ reg:
+ maxItems: 1
+
unevaluatedProperties: false
examples:
AMD Pensando Elba ARM 64-bit SoC is integrated with this IP and explicitly controls byte-lane enables. Signed-off-by: Brad Larson <blarson@amd.com> --- v12_changes: - Drop 'resets: false' in the amd,pensando-elba-sd4hc else properties. Passed dtbs_check and dt_binding_check with both versions. v11 changes: - Remove resets description and reset-names - Add descriptions for amd,pensando-elba-sd4hc reg items v10 changes: - Move reset-names property definition next to existing resets prop - Move allOf to the bottom and set resets/reset-names required only for pensando - Fix reg maxItems for existing, must be 1 v9 changes: - Add reset-names and resets properties - Add if/then on property amd,pensando-elba-sd4hc to set reg property values for minItems and maxItems --- .../devicetree/bindings/mmc/cdns,sdhci.yaml | 27 ++++++++++++++++--- 1 file changed, 23 insertions(+), 4 deletions(-)