[v3,1/2] mmc: core: Mark close-ended ffu in progress

Commit Message

Avri Altman Oct. 25, 2023, 11:30 a.m. UTC

Field Firmware Update (ffu) may use close-ended or open ended sequence.
Each such sequence is comprised of a write commands enclosed between 2
switch commands - to and from ffu mode. So for the close-ended case, it
will be: cmd6->cmd23-cmd25-cmd6.

Capture this sequence and make it available for the host modules, should
it is needed.

Signed-off-by: Avri Altman <[e-mail]>
---
 drivers/mmc/core/block.c | 34 ++++++++++++++++++++++++++++++++++
 include/linux/mmc/host.h |  1 +
 include/linux/mmc/mmc.h  |  1 +
 3 files changed, 36 insertions(+)

Patch

diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index 3a8f27c3e310..ee5ec4686582 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -96,6 +96,10 @@  static int max_devices;
 static DEFINE_IDA(mmc_blk_ida);
 static DEFINE_IDA(mmc_rpmb_ida);
 
+static unsigned int ffu_progress;
+#define MMC_FFU_START	BIT(0)	/* FFU in progress */
+#define MMC_FFU_SBC	BIT(1)	/* close-ended FFU in progress */
+
 struct mmc_blk_busy_data {
 	struct mmc_card *card;
 	u32 status;
@@ -464,6 +468,34 @@  static int mmc_blk_ioctl_copy_to_user(struct mmc_ioc_cmd __user *ic_ptr,
 	return 0;
 }
 
+bool mmc_is_ffu_cmd(struct mmc_command *cmd)
+{
+	return ((ffu_progress & MMC_FFU_SBC) &&
+		cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK);
+}
+
+static void mmc_blk_ffu_progress(struct mmc_command *cmd)
+{
+	if (MMC_EXTRACT_INDEX_FROM_ARG(cmd->arg) != EXT_CSD_MODE_CONFIG &&
+	    ffu_progress == 0)
+		return;
+
+	if ((MMC_EXTRACT_INDEX_FROM_ARG(cmd->arg) == EXT_CSD_MODE_CONFIG) &&
+	    (cmd->opcode == MMC_SWITCH)) {
+		u8 value = MMC_EXTRACT_VALUE_FROM_ARG(cmd->arg);
+
+		if (value == 1)
+			ffu_progress = MMC_FFU_START;
+		else
+			ffu_progress = 0;
+
+		return;
+	} else if (ffu_progress == MMC_FFU_START &&
+		   cmd->opcode == MMC_SET_BLOCK_COUNT) {
+		ffu_progress |= MMC_FFU_SBC;
+	}
+}
+
 static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
 			       struct mmc_blk_ioc_data *idata)
 {
@@ -548,6 +580,8 @@  static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
 	    (cmd.opcode == MMC_SWITCH))
 		return mmc_sanitize(card, idata->ic.cmd_timeout_ms);
 
+	mmc_blk_ffu_progress(&cmd);
+
 	/* If it's an R1B response we need some more preparations. */
 	busy_timeout_ms = idata->ic.cmd_timeout_ms ? : MMC_BLK_TIMEOUT_MS;
 	r1b_resp = (cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B;
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 2f445c651742..e2cb20f7c50c 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -677,5 +677,6 @@  int mmc_send_status(struct mmc_card *card, u32 *status);
 int mmc_send_tuning(struct mmc_host *host, u32 opcode, int *cmd_error);
 int mmc_send_abort_tuning(struct mmc_host *host, u32 opcode);
 int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd);
+bool mmc_is_ffu_cmd(struct mmc_command *cmd);
 
 #endif /* LINUX_MMC_HOST_H */
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index 6f7993803ee7..d4d10cabaa57 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -254,6 +254,7 @@  static inline bool mmc_ready_for_data(u32 status)
  */
 
 #define EXT_CSD_CMDQ_MODE_EN		15	/* R/W */
+#define EXT_CSD_MODE_CONFIG		30	/* R/W */
 #define EXT_CSD_FLUSH_CACHE		32      /* W */
 #define EXT_CSD_CACHE_CTRL		33      /* R/W */
 #define EXT_CSD_POWER_OFF_NOTIFICATION	34	/* R/W */