Message ID | 20231103084720.6886-7-adrian.hunter@intel.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | mmc: block: Fixes for CQE error recovery recovery | expand |
> If a task completion notification (TCN) is received when there is no > outstanding task, the cqhci driver issues a "spurious TCN" warning. This was > observed to happen right after CQE error recovery. > > When an error interrupt is received the driver runs recovery logic. > It halts the controller, clears all pending tasks, and then re-enables it. On > some platforms, like Intel Jasper Lake, a stale task completion event was > observed, regardless of the CQHCI_CLEAR_ALL_TASKS bit being set. > > This results in either: > a) Spurious TC completion event for an empty slot. > b) Corrupted data being passed up the stack, as a result of premature > completion for a newly added task. > > Rather than add a quirk for affected controllers, ensure tasks are cleared by > toggling CQHCI_ENABLE, which would happen anyway if > cqhci_clear_all_tasks() timed out. This is simpler and should be safe and > effective for all controllers. > > Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled > host") > Cc: stable@vger.kernel.org > Reported-by: Kornel Dulęba <korneld@chromium.org> > Tested-by: Kornel Dulęba <korneld@chromium.org> > Co-developed-by: Kornel Dulęba <korneld@chromium.org> > Signed-off-by: Kornel Dulęba <korneld@chromium.org> > Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Avri Altman <avri.altman@wdc.com>
diff --git a/drivers/mmc/host/cqhci-core.c b/drivers/mmc/host/cqhci-core.c index 948799a0980c..41e94cd14109 100644 --- a/drivers/mmc/host/cqhci-core.c +++ b/drivers/mmc/host/cqhci-core.c @@ -1075,28 +1075,28 @@ static void cqhci_recovery_finish(struct mmc_host *mmc) ok = cqhci_halt(mmc, CQHCI_FINISH_HALT_TIMEOUT); - if (!cqhci_clear_all_tasks(mmc, CQHCI_CLEAR_TIMEOUT)) - ok = false; - /* * The specification contradicts itself, by saying that tasks cannot be * cleared if CQHCI does not halt, but if CQHCI does not halt, it should * be disabled/re-enabled, but not to disable before clearing tasks. * Have a go anyway. */ - if (!ok) { - pr_debug("%s: cqhci: disable / re-enable\n", mmc_hostname(mmc)); - cqcfg = cqhci_readl(cq_host, CQHCI_CFG); - cqcfg &= ~CQHCI_ENABLE; - cqhci_writel(cq_host, cqcfg, CQHCI_CFG); - cqcfg |= CQHCI_ENABLE; - cqhci_writel(cq_host, cqcfg, CQHCI_CFG); - /* Be sure that there are no tasks */ - ok = cqhci_halt(mmc, CQHCI_FINISH_HALT_TIMEOUT); - if (!cqhci_clear_all_tasks(mmc, CQHCI_CLEAR_TIMEOUT)) - ok = false; - WARN_ON(!ok); - } + if (!cqhci_clear_all_tasks(mmc, CQHCI_CLEAR_TIMEOUT)) + ok = false; + + /* Disable to make sure tasks really are cleared */ + cqcfg = cqhci_readl(cq_host, CQHCI_CFG); + cqcfg &= ~CQHCI_ENABLE; + cqhci_writel(cq_host, cqcfg, CQHCI_CFG); + + cqcfg = cqhci_readl(cq_host, CQHCI_CFG); + cqcfg |= CQHCI_ENABLE; + cqhci_writel(cq_host, cqcfg, CQHCI_CFG); + + cqhci_halt(mmc, CQHCI_FINISH_HALT_TIMEOUT); + + if (!ok) + cqhci_clear_all_tasks(mmc, CQHCI_CLEAR_TIMEOUT); cqhci_recover_mrqs(cq_host);