| Message ID | 20240221-b4-mmc-hi3798mv200-v6-3-bc41bf6a9769@outlook.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | mmc: add hi3798mv200 specific extensions of DWMMC | expand |
On Wed, 21 Feb 2024 at 13:45, Yang Xiwen via B4 Relay <devnull+forbidden405.outlook.com@kernel.org> wrote: > > From: Yang Xiwen <forbidden405@outlook.com> > > Add support for Hi3798MV200 specific extension. > > Signed-off-by: Yang Xiwen <forbidden405@outlook.com> > --- > drivers/mmc/host/Kconfig | 9 ++ > drivers/mmc/host/Makefile | 1 + > drivers/mmc/host/dw_mmc-hi3798mv200.c | 239 ++++++++++++++++++++++++++++++++++ > 3 files changed, 249 insertions(+) > > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig > index 81f2c4e05287..aebc587f77a7 100644 > --- a/drivers/mmc/host/Kconfig > +++ b/drivers/mmc/host/Kconfig > @@ -798,6 +798,15 @@ config MMC_DW_HI3798CV200 > Synopsys DesignWare Memory Card Interface driver. Select this option > for platforms based on HiSilicon Hi3798CV200 SoC. > > +config MMC_DW_HI3798MV200 > + tristate "Hi3798MV200 specific extensions for Synopsys DW Memory Card Interface" > + depends on MMC_DW > + select MMC_DW_PLTFM > + help > + This selects support for HiSilicon Hi3798MV200 SoC specific extensions to the > + Synopsys DesignWare Memory Card Interface driver. Select this option > + for platforms based on HiSilicon Hi3798MV200 SoC. > + > config MMC_DW_K3 > tristate "K3 specific extensions for Synopsys DW Memory Card Interface" > depends on MMC_DW > diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile > index d0be4465f3ec..f53f86d200ac 100644 > --- a/drivers/mmc/host/Makefile > +++ b/drivers/mmc/host/Makefile > @@ -51,6 +51,7 @@ obj-$(CONFIG_MMC_DW_PLTFM) += dw_mmc-pltfm.o > obj-$(CONFIG_MMC_DW_BLUEFIELD) += dw_mmc-bluefield.o > obj-$(CONFIG_MMC_DW_EXYNOS) += dw_mmc-exynos.o > obj-$(CONFIG_MMC_DW_HI3798CV200) += dw_mmc-hi3798cv200.o > +obj-$(CONFIG_MMC_DW_HI3798MV200) += dw_mmc-hi3798mv200.o > obj-$(CONFIG_MMC_DW_K3) += dw_mmc-k3.o > obj-$(CONFIG_MMC_DW_PCI) += dw_mmc-pci.o > obj-$(CONFIG_MMC_DW_ROCKCHIP) += dw_mmc-rockchip.o > diff --git a/drivers/mmc/host/dw_mmc-hi3798mv200.c b/drivers/mmc/host/dw_mmc-hi3798mv200.c > new file mode 100644 > index 000000000000..73aaa21040ea > --- /dev/null > +++ b/drivers/mmc/host/dw_mmc-hi3798mv200.c > @@ -0,0 +1,239 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Modified from dw_mmc-hi3798cv200.c > + * > + * Copyright (c) 2024 Yang Xiwen <forbidden405@outlook.com> > + * Copyright (c) 2018 HiSilicon Technologies Co., Ltd. > + */ > + > +#include <linux/clk.h> > +#include <linux/mfd/syscon.h> > +#include <linux/mmc/host.h> > +#include <linux/module.h> > +#include <linux/of_address.h> > +#include <linux/platform_device.h> > +#include <linux/regmap.h> > + > +#include "dw_mmc.h" > +#include "dw_mmc-pltfm.h" > + > +#define SDMMC_TUNING_CTRL 0x118 > +#define SDMMC_TUNING_FIND_EDGE BIT(5) > + > +#define ALL_INT_CLR 0x1ffff > + > +/* DLL ctrl reg */ > +#define SAP_DLL_CTRL_DLLMODE BIT(16) > + > +struct dw_mci_hi3798mv200_priv { > + struct clk *sample_clk; > + struct clk *drive_clk; > + struct regmap *crg_reg; > + u32 sap_dll_offset; > + struct mmc_clk_phase_map phase_map; > +}; > + > +static void dw_mci_hi3798mv200_set_ios(struct dw_mci *host, struct mmc_ios *ios) > +{ > + struct dw_mci_hi3798mv200_priv *priv = host->priv; > + struct mmc_clk_phase phase = priv->phase_map.phase[ios->timing]; > + u32 val; > + > + val = mci_readl(host, ENABLE_SHIFT); > + if (ios->timing == MMC_TIMING_MMC_DDR52 > + || ios->timing == MMC_TIMING_UHS_DDR50) > + val |= SDMMC_ENABLE_PHASE; > + else > + val &= ~SDMMC_ENABLE_PHASE; > + mci_writel(host, ENABLE_SHIFT, val); > + > + val = mci_readl(host, DDR_REG); > + if (ios->timing == MMC_TIMING_MMC_HS400) > + val |= SDMMC_DDR_HS400; > + else > + val &= ~SDMMC_DDR_HS400; > + mci_writel(host, DDR_REG, val); > + > + if (clk_set_rate(host->ciu_clk, ios->clock)) > + dev_warn(host->dev, "Failed to set rate to %u\n", ios->clock); > + else > + // CLK_MUX_ROUND_NEAREST is enabled for this clock > + // The actual clock rate is not what we setted, but a rounded value > + // so we should get the rate once again Please use proper comments sections (/* .... */) and not "//". > + host->bus_hz = clk_get_rate(host->ciu_clk); > + > + if (phase.valid) { > + clk_set_phase(priv->drive_clk, phase.out_deg); > + clk_set_phase(priv->sample_clk, phase.in_deg); > + } else { > + dev_warn(host->dev, > + "The phase entry for timing mode %d is missing in device tree.\n", > + ios->timing); > + } > +} > + > +static inline int dw_mci_hi3798mv200_enable_tuning(struct dw_mci_slot *slot) > +{ > + struct dw_mci_hi3798mv200_priv *priv = slot->host->priv; > + > + return regmap_clear_bits(priv->crg_reg, priv->sap_dll_offset, SAP_DLL_CTRL_DLLMODE); > +} > + > +static inline int dw_mci_hi3798mv200_disable_tuning(struct dw_mci_slot *slot) > +{ > + struct dw_mci_hi3798mv200_priv *priv = slot->host->priv; > + > + return regmap_set_bits(priv->crg_reg, priv->sap_dll_offset, SAP_DLL_CTRL_DLLMODE); > +} > + > +static int dw_mci_hi3798mv200_execute_tuning_mix_mode(struct dw_mci_slot *slot, > + u32 opcode) > +{ > + static const int degrees[] = { 0, 45, 90, 135, 180, 225, 270, 315 }; > + struct dw_mci *host = slot->host; > + struct dw_mci_hi3798mv200_priv *priv = host->priv; > + int raise_point = -1, fall_point = -1; > + int err, prev_err = -1; > + int found = 0; > + int regval; > + int i; > + int ret; > + > + // enable tuning Looks like a redundant comment, please drop it. > + ret = dw_mci_hi3798mv200_enable_tuning(slot); > + if (ret < 0) > + return ret; A newline here would improve the readability I think. > + for (i = 0; i < ARRAY_SIZE(degrees); i++) { > + clk_set_phase(priv->sample_clk, degrees[i]); > + mci_writel(host, RINTSTS, ALL_INT_CLR); > + > + err = mmc_send_tuning(slot->mmc, opcode, NULL); > + if (!err) { > + regval = mci_readl(host, TUNING_CTRL); > + if (regval & SDMMC_TUNING_FIND_EDGE) > + err = 1; > + else > + found = 1; > + }; > + > + if (i > 0) { > + if (err && !prev_err) > + fall_point = i - 1; > + if (!err && prev_err) > + raise_point = i; > + } > + > + if (raise_point != -1 && fall_point != -1) > + goto tuning_out; > + > + prev_err = err; > + err = 0; > + } > + > +tuning_out: > + ret = dw_mci_hi3798mv200_disable_tuning(slot); > + if (ret < 0) > + return ret; > + if (found) { > + if (raise_point == -1) > + raise_point = 0; > + if (fall_point == -1) > + fall_point = ARRAY_SIZE(degrees) - 1; > + if (fall_point < raise_point) { > + if ((raise_point + fall_point) > > + (ARRAY_SIZE(degrees) - 1)) > + i = fall_point / 2; > + else > + i = (raise_point + ARRAY_SIZE(degrees) - 1) / 2; > + } else { > + i = (raise_point + fall_point) / 2; > + } > + > + // use the same phase table for both HS200 and HS400 Don't use "//" for comments. > + priv->phase_map.phase[MMC_TIMING_MMC_HS200].in_deg = degrees[i]; > + priv->phase_map.phase[MMC_TIMING_MMC_HS400].in_deg = degrees[i]; > + > + clk_set_phase(priv->sample_clk, degrees[i]); > + dev_dbg(host->dev, "Tuning clk_sample[%d, %d], set[%d]\n", > + raise_point, fall_point, degrees[i]); > + err = 0; > + } else { > + dev_err(host->dev, "No valid clk_sample shift! use default\n"); > + err = -EINVAL; > + } > + > + mci_writel(host, RINTSTS, ALL_INT_CLR); > + return err; The entire code in dw_mci_hi3798mv200_execute_tuning_mix_mode() looks rather messy to me. A lot of variables are being used, set and reset from everywhere. Would you mind having a closer look and try to improve it a bit, so it becomes easier to follow what is going on? > +} > + > +static int dw_mci_hi3798mv200_init(struct dw_mci *host) > +{ > + struct dw_mci_hi3798mv200_priv *priv; > + struct device_node *np = host->dev->of_node; > + int ret; > + > + priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL); > + if (!priv) > + return -ENOMEM; > + > + mmc_of_parse_clk_phase(host->dev, &priv->phase_map); > + > + priv->sample_clk = devm_clk_get_enabled(host->dev, "ciu-sample"); > + if (IS_ERR(priv->sample_clk)) > + return dev_err_probe(host->dev, PTR_ERR(priv->sample_clk), > + "failed to get enabled ciu-sample clock\n"); > + > + priv->drive_clk = devm_clk_get_enabled(host->dev, "ciu-drive"); > + if (IS_ERR(priv->drive_clk)) > + return dev_err_probe(host->dev, PTR_ERR(priv->drive_clk), > + "failed to get enabled ciu-drive clock\n"); > + > + priv->crg_reg = syscon_regmap_lookup_by_phandle(np, "hisilicon,sap-dll-reg"); > + if (IS_ERR(priv->crg_reg)) > + return dev_err_probe(host->dev, PTR_ERR(priv->crg_reg), > + "failed to get CRG reg\n"); > + > + ret = of_property_read_u32_index(np, "hisilicon,sap-dll-reg", 1, &priv->sap_dll_offset); > + if (ret) > + return dev_err_probe(host->dev, ret, "failed to get sample DLL register offset\n"); > + > + host->priv = priv; > + return 0; > +} > + > +static const struct dw_mci_drv_data hi3798mv200_data = { > + .common_caps = MMC_CAP_CMD23, > + .init = dw_mci_hi3798mv200_init, > + .set_ios = dw_mci_hi3798mv200_set_ios, > + .execute_tuning = dw_mci_hi3798mv200_execute_tuning_mix_mode, > +}; > + > +static const struct of_device_id dw_mci_hi3798mv200_match[] = { > + { .compatible = "hisilicon,hi3798mv200-dw-mshc" }, > + {}, > +}; > + > +static int dw_mci_hi3798mv200_probe(struct platform_device *pdev) > +{ > + return dw_mci_pltfm_register(pdev, &hi3798mv200_data); > +} > + > +static void dw_mci_hi3798mv200_remove(struct platform_device *pdev) > +{ > + dw_mci_pltfm_remove(pdev); > +} > + > +MODULE_DEVICE_TABLE(of, dw_mci_hi3798mv200_match); > +static struct platform_driver dw_mci_hi3798mv200_driver = { > + .probe = dw_mci_hi3798mv200_probe, > + .remove_new = dw_mci_hi3798mv200_remove, > + .driver = { > + .name = "dwmmc_hi3798mv200", > + .probe_type = PROBE_PREFER_ASYNCHRONOUS, > + .of_match_table = dw_mci_hi3798mv200_match, > + }, > +}; > +module_platform_driver(dw_mci_hi3798mv200_driver); > + > +MODULE_DESCRIPTION("HiSilicon Hi3798MV200 Specific DW-MSHC Driver Extension"); > +MODULE_LICENSE("GPL"); > Kind regards Uffe
On 2/27/2024 11:16 PM, Ulf Hansson wrote: > On Wed, 21 Feb 2024 at 13:45, Yang Xiwen via B4 Relay > <devnull+forbidden405.outlook.com@kernel.org> wrote: >> >> From: Yang Xiwen <forbidden405@outlook.com> >> >> Add support for Hi3798MV200 specific extension. >> >> Signed-off-by: Yang Xiwen <forbidden405@outlook.com> >> --- >> drivers/mmc/host/Kconfig | 9 ++ >> drivers/mmc/host/Makefile | 1 + >> drivers/mmc/host/dw_mmc-hi3798mv200.c | 239 ++++++++++++++++++++++++++++++++++ >> 3 files changed, 249 insertions(+) >> >> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig >> index 81f2c4e05287..aebc587f77a7 100644 >> --- a/drivers/mmc/host/Kconfig >> +++ b/drivers/mmc/host/Kconfig >> @@ -798,6 +798,15 @@ config MMC_DW_HI3798CV200 >> Synopsys DesignWare Memory Card Interface driver. Select this option >> for platforms based on HiSilicon Hi3798CV200 SoC. >> >> +config MMC_DW_HI3798MV200 >> + tristate "Hi3798MV200 specific extensions for Synopsys DW Memory Card Interface" >> + depends on MMC_DW >> + select MMC_DW_PLTFM >> + help >> + This selects support for HiSilicon Hi3798MV200 SoC specific extensions to the >> + Synopsys DesignWare Memory Card Interface driver. Select this option >> + for platforms based on HiSilicon Hi3798MV200 SoC. >> + >> config MMC_DW_K3 >> tristate "K3 specific extensions for Synopsys DW Memory Card Interface" >> depends on MMC_DW >> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile >> index d0be4465f3ec..f53f86d200ac 100644 >> --- a/drivers/mmc/host/Makefile >> +++ b/drivers/mmc/host/Makefile >> @@ -51,6 +51,7 @@ obj-$(CONFIG_MMC_DW_PLTFM) += dw_mmc-pltfm.o >> obj-$(CONFIG_MMC_DW_BLUEFIELD) += dw_mmc-bluefield.o >> obj-$(CONFIG_MMC_DW_EXYNOS) += dw_mmc-exynos.o >> obj-$(CONFIG_MMC_DW_HI3798CV200) += dw_mmc-hi3798cv200.o >> +obj-$(CONFIG_MMC_DW_HI3798MV200) += dw_mmc-hi3798mv200.o >> obj-$(CONFIG_MMC_DW_K3) += dw_mmc-k3.o >> obj-$(CONFIG_MMC_DW_PCI) += dw_mmc-pci.o >> obj-$(CONFIG_MMC_DW_ROCKCHIP) += dw_mmc-rockchip.o >> diff --git a/drivers/mmc/host/dw_mmc-hi3798mv200.c b/drivers/mmc/host/dw_mmc-hi3798mv200.c >> new file mode 100644 >> index 000000000000..73aaa21040ea >> --- /dev/null >> +++ b/drivers/mmc/host/dw_mmc-hi3798mv200.c >> @@ -0,0 +1,239 @@ >> +// SPDX-License-Identifier: GPL-2.0-only >> +/* >> + * Modified from dw_mmc-hi3798cv200.c >> + * >> + * Copyright (c) 2024 Yang Xiwen <forbidden405@outlook.com> >> + * Copyright (c) 2018 HiSilicon Technologies Co., Ltd. >> + */ >> + >> +#include <linux/clk.h> >> +#include <linux/mfd/syscon.h> >> +#include <linux/mmc/host.h> >> +#include <linux/module.h> >> +#include <linux/of_address.h> >> +#include <linux/platform_device.h> >> +#include <linux/regmap.h> >> + >> +#include "dw_mmc.h" >> +#include "dw_mmc-pltfm.h" >> + >> +#define SDMMC_TUNING_CTRL 0x118 >> +#define SDMMC_TUNING_FIND_EDGE BIT(5) >> + >> +#define ALL_INT_CLR 0x1ffff >> + >> +/* DLL ctrl reg */ >> +#define SAP_DLL_CTRL_DLLMODE BIT(16) >> + >> +struct dw_mci_hi3798mv200_priv { >> + struct clk *sample_clk; >> + struct clk *drive_clk; >> + struct regmap *crg_reg; >> + u32 sap_dll_offset; >> + struct mmc_clk_phase_map phase_map; >> +}; >> + >> +static void dw_mci_hi3798mv200_set_ios(struct dw_mci *host, struct mmc_ios *ios) >> +{ >> + struct dw_mci_hi3798mv200_priv *priv = host->priv; >> + struct mmc_clk_phase phase = priv->phase_map.phase[ios->timing]; >> + u32 val; >> + >> + val = mci_readl(host, ENABLE_SHIFT); >> + if (ios->timing == MMC_TIMING_MMC_DDR52 >> + || ios->timing == MMC_TIMING_UHS_DDR50) >> + val |= SDMMC_ENABLE_PHASE; >> + else >> + val &= ~SDMMC_ENABLE_PHASE; >> + mci_writel(host, ENABLE_SHIFT, val); >> + >> + val = mci_readl(host, DDR_REG); >> + if (ios->timing == MMC_TIMING_MMC_HS400) >> + val |= SDMMC_DDR_HS400; >> + else >> + val &= ~SDMMC_DDR_HS400; >> + mci_writel(host, DDR_REG, val); >> + >> + if (clk_set_rate(host->ciu_clk, ios->clock)) >> + dev_warn(host->dev, "Failed to set rate to %u\n", ios->clock); >> + else >> + // CLK_MUX_ROUND_NEAREST is enabled for this clock >> + // The actual clock rate is not what we setted, but a rounded value >> + // so we should get the rate once again > > Please use proper comments sections (/* .... */) and not "//". > >> + host->bus_hz = clk_get_rate(host->ciu_clk); >> + >> + if (phase.valid) { >> + clk_set_phase(priv->drive_clk, phase.out_deg); >> + clk_set_phase(priv->sample_clk, phase.in_deg); >> + } else { >> + dev_warn(host->dev, >> + "The phase entry for timing mode %d is missing in device tree.\n", >> + ios->timing); >> + } >> +} >> + >> +static inline int dw_mci_hi3798mv200_enable_tuning(struct dw_mci_slot *slot) >> +{ >> + struct dw_mci_hi3798mv200_priv *priv = slot->host->priv; >> + >> + return regmap_clear_bits(priv->crg_reg, priv->sap_dll_offset, SAP_DLL_CTRL_DLLMODE); >> +} >> + >> +static inline int dw_mci_hi3798mv200_disable_tuning(struct dw_mci_slot *slot) >> +{ >> + struct dw_mci_hi3798mv200_priv *priv = slot->host->priv; >> + >> + return regmap_set_bits(priv->crg_reg, priv->sap_dll_offset, SAP_DLL_CTRL_DLLMODE); >> +} >> + >> +static int dw_mci_hi3798mv200_execute_tuning_mix_mode(struct dw_mci_slot *slot, >> + u32 opcode) >> +{ >> + static const int degrees[] = { 0, 45, 90, 135, 180, 225, 270, 315 }; >> + struct dw_mci *host = slot->host; >> + struct dw_mci_hi3798mv200_priv *priv = host->priv; >> + int raise_point = -1, fall_point = -1; >> + int err, prev_err = -1; >> + int found = 0; >> + int regval; >> + int i; >> + int ret; >> + >> + // enable tuning > > Looks like a redundant comment, please drop it. > >> + ret = dw_mci_hi3798mv200_enable_tuning(slot); >> + if (ret < 0) >> + return ret; > > A newline here would improve the readability I think. > >> + for (i = 0; i < ARRAY_SIZE(degrees); i++) { >> + clk_set_phase(priv->sample_clk, degrees[i]); >> + mci_writel(host, RINTSTS, ALL_INT_CLR); >> + >> + err = mmc_send_tuning(slot->mmc, opcode, NULL); >> + if (!err) { >> + regval = mci_readl(host, TUNING_CTRL); >> + if (regval & SDMMC_TUNING_FIND_EDGE) >> + err = 1; >> + else >> + found = 1; >> + }; >> + >> + if (i > 0) { >> + if (err && !prev_err) >> + fall_point = i - 1; >> + if (!err && prev_err) >> + raise_point = i; >> + } >> + >> + if (raise_point != -1 && fall_point != -1) >> + goto tuning_out; >> + >> + prev_err = err; >> + err = 0; >> + } >> + >> +tuning_out: >> + ret = dw_mci_hi3798mv200_disable_tuning(slot); >> + if (ret < 0) >> + return ret; >> + if (found) { >> + if (raise_point == -1) >> + raise_point = 0; >> + if (fall_point == -1) >> + fall_point = ARRAY_SIZE(degrees) - 1; >> + if (fall_point < raise_point) { >> + if ((raise_point + fall_point) > >> + (ARRAY_SIZE(degrees) - 1)) >> + i = fall_point / 2; >> + else >> + i = (raise_point + ARRAY_SIZE(degrees) - 1) / 2; >> + } else { >> + i = (raise_point + fall_point) / 2; >> + } >> + >> + // use the same phase table for both HS200 and HS400 > > Don't use "//" for comments. > >> + priv->phase_map.phase[MMC_TIMING_MMC_HS200].in_deg = degrees[i]; >> + priv->phase_map.phase[MMC_TIMING_MMC_HS400].in_deg = degrees[i]; >> + >> + clk_set_phase(priv->sample_clk, degrees[i]); >> + dev_dbg(host->dev, "Tuning clk_sample[%d, %d], set[%d]\n", >> + raise_point, fall_point, degrees[i]); >> + err = 0; >> + } else { >> + dev_err(host->dev, "No valid clk_sample shift! use default\n"); >> + err = -EINVAL; >> + } >> + >> + mci_writel(host, RINTSTS, ALL_INT_CLR); >> + return err; > > The entire code in dw_mci_hi3798mv200_execute_tuning_mix_mode() looks > rather messy to me. A lot of variables are being used, set and reset > from everywhere. > > Would you mind having a closer look and try to improve it a bit, so it > becomes easier to follow what is going on? That might because the code here is modified from dw-mmc_hi3798cv200.c. And That file is already a mess. I'll try to improve it soon. > >> +} >> + >> +static int dw_mci_hi3798mv200_init(struct dw_mci *host) >> +{ >> + struct dw_mci_hi3798mv200_priv *priv; >> + struct device_node *np = host->dev->of_node; >> + int ret; >> + >> + priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL); >> + if (!priv) >> + return -ENOMEM; >> + >> + mmc_of_parse_clk_phase(host->dev, &priv->phase_map); >> + >> + priv->sample_clk = devm_clk_get_enabled(host->dev, "ciu-sample"); >> + if (IS_ERR(priv->sample_clk)) >> + return dev_err_probe(host->dev, PTR_ERR(priv->sample_clk), >> + "failed to get enabled ciu-sample clock\n"); >> + >> + priv->drive_clk = devm_clk_get_enabled(host->dev, "ciu-drive"); >> + if (IS_ERR(priv->drive_clk)) >> + return dev_err_probe(host->dev, PTR_ERR(priv->drive_clk), >> + "failed to get enabled ciu-drive clock\n"); >> + >> + priv->crg_reg = syscon_regmap_lookup_by_phandle(np, "hisilicon,sap-dll-reg"); >> + if (IS_ERR(priv->crg_reg)) >> + return dev_err_probe(host->dev, PTR_ERR(priv->crg_reg), >> + "failed to get CRG reg\n"); >> + >> + ret = of_property_read_u32_index(np, "hisilicon,sap-dll-reg", 1, &priv->sap_dll_offset); >> + if (ret) >> + return dev_err_probe(host->dev, ret, "failed to get sample DLL register offset\n"); >> + >> + host->priv = priv; >> + return 0; >> +} >> + >> +static const struct dw_mci_drv_data hi3798mv200_data = { >> + .common_caps = MMC_CAP_CMD23, >> + .init = dw_mci_hi3798mv200_init, >> + .set_ios = dw_mci_hi3798mv200_set_ios, >> + .execute_tuning = dw_mci_hi3798mv200_execute_tuning_mix_mode, >> +}; >> + >> +static const struct of_device_id dw_mci_hi3798mv200_match[] = { >> + { .compatible = "hisilicon,hi3798mv200-dw-mshc" }, >> + {}, >> +}; >> + >> +static int dw_mci_hi3798mv200_probe(struct platform_device *pdev) >> +{ >> + return dw_mci_pltfm_register(pdev, &hi3798mv200_data); >> +} >> + >> +static void dw_mci_hi3798mv200_remove(struct platform_device *pdev) >> +{ >> + dw_mci_pltfm_remove(pdev); >> +} >> + >> +MODULE_DEVICE_TABLE(of, dw_mci_hi3798mv200_match); >> +static struct platform_driver dw_mci_hi3798mv200_driver = { >> + .probe = dw_mci_hi3798mv200_probe, >> + .remove_new = dw_mci_hi3798mv200_remove, >> + .driver = { >> + .name = "dwmmc_hi3798mv200", >> + .probe_type = PROBE_PREFER_ASYNCHRONOUS, >> + .of_match_table = dw_mci_hi3798mv200_match, >> + }, >> +}; >> +module_platform_driver(dw_mci_hi3798mv200_driver); >> + >> +MODULE_DESCRIPTION("HiSilicon Hi3798MV200 Specific DW-MSHC Driver Extension"); >> +MODULE_LICENSE("GPL"); >> > > Kind regards > Uffe
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 81f2c4e05287..aebc587f77a7 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -798,6 +798,15 @@ config MMC_DW_HI3798CV200 Synopsys DesignWare Memory Card Interface driver. Select this option for platforms based on HiSilicon Hi3798CV200 SoC. +config MMC_DW_HI3798MV200 + tristate "Hi3798MV200 specific extensions for Synopsys DW Memory Card Interface" + depends on MMC_DW + select MMC_DW_PLTFM + help + This selects support for HiSilicon Hi3798MV200 SoC specific extensions to the + Synopsys DesignWare Memory Card Interface driver. Select this option + for platforms based on HiSilicon Hi3798MV200 SoC. + config MMC_DW_K3 tristate "K3 specific extensions for Synopsys DW Memory Card Interface" depends on MMC_DW diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index d0be4465f3ec..f53f86d200ac 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -51,6 +51,7 @@ obj-$(CONFIG_MMC_DW_PLTFM) += dw_mmc-pltfm.o obj-$(CONFIG_MMC_DW_BLUEFIELD) += dw_mmc-bluefield.o obj-$(CONFIG_MMC_DW_EXYNOS) += dw_mmc-exynos.o obj-$(CONFIG_MMC_DW_HI3798CV200) += dw_mmc-hi3798cv200.o +obj-$(CONFIG_MMC_DW_HI3798MV200) += dw_mmc-hi3798mv200.o obj-$(CONFIG_MMC_DW_K3) += dw_mmc-k3.o obj-$(CONFIG_MMC_DW_PCI) += dw_mmc-pci.o obj-$(CONFIG_MMC_DW_ROCKCHIP) += dw_mmc-rockchip.o diff --git a/drivers/mmc/host/dw_mmc-hi3798mv200.c b/drivers/mmc/host/dw_mmc-hi3798mv200.c new file mode 100644 index 000000000000..73aaa21040ea --- /dev/null +++ b/drivers/mmc/host/dw_mmc-hi3798mv200.c @@ -0,0 +1,239 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Modified from dw_mmc-hi3798cv200.c + * + * Copyright (c) 2024 Yang Xiwen <forbidden405@outlook.com> + * Copyright (c) 2018 HiSilicon Technologies Co., Ltd. + */ + +#include <linux/clk.h> +#include <linux/mfd/syscon.h> +#include <linux/mmc/host.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#include "dw_mmc.h" +#include "dw_mmc-pltfm.h" + +#define SDMMC_TUNING_CTRL 0x118 +#define SDMMC_TUNING_FIND_EDGE BIT(5) + +#define ALL_INT_CLR 0x1ffff + +/* DLL ctrl reg */ +#define SAP_DLL_CTRL_DLLMODE BIT(16) + +struct dw_mci_hi3798mv200_priv { + struct clk *sample_clk; + struct clk *drive_clk; + struct regmap *crg_reg; + u32 sap_dll_offset; + struct mmc_clk_phase_map phase_map; +}; + +static void dw_mci_hi3798mv200_set_ios(struct dw_mci *host, struct mmc_ios *ios) +{ + struct dw_mci_hi3798mv200_priv *priv = host->priv; + struct mmc_clk_phase phase = priv->phase_map.phase[ios->timing]; + u32 val; + + val = mci_readl(host, ENABLE_SHIFT); + if (ios->timing == MMC_TIMING_MMC_DDR52 + || ios->timing == MMC_TIMING_UHS_DDR50) + val |= SDMMC_ENABLE_PHASE; + else + val &= ~SDMMC_ENABLE_PHASE; + mci_writel(host, ENABLE_SHIFT, val); + + val = mci_readl(host, DDR_REG); + if (ios->timing == MMC_TIMING_MMC_HS400) + val |= SDMMC_DDR_HS400; + else + val &= ~SDMMC_DDR_HS400; + mci_writel(host, DDR_REG, val); + + if (clk_set_rate(host->ciu_clk, ios->clock)) + dev_warn(host->dev, "Failed to set rate to %u\n", ios->clock); + else + // CLK_MUX_ROUND_NEAREST is enabled for this clock + // The actual clock rate is not what we setted, but a rounded value + // so we should get the rate once again + host->bus_hz = clk_get_rate(host->ciu_clk); + + if (phase.valid) { + clk_set_phase(priv->drive_clk, phase.out_deg); + clk_set_phase(priv->sample_clk, phase.in_deg); + } else { + dev_warn(host->dev, + "The phase entry for timing mode %d is missing in device tree.\n", + ios->timing); + } +} + +static inline int dw_mci_hi3798mv200_enable_tuning(struct dw_mci_slot *slot) +{ + struct dw_mci_hi3798mv200_priv *priv = slot->host->priv; + + return regmap_clear_bits(priv->crg_reg, priv->sap_dll_offset, SAP_DLL_CTRL_DLLMODE); +} + +static inline int dw_mci_hi3798mv200_disable_tuning(struct dw_mci_slot *slot) +{ + struct dw_mci_hi3798mv200_priv *priv = slot->host->priv; + + return regmap_set_bits(priv->crg_reg, priv->sap_dll_offset, SAP_DLL_CTRL_DLLMODE); +} + +static int dw_mci_hi3798mv200_execute_tuning_mix_mode(struct dw_mci_slot *slot, + u32 opcode) +{ + static const int degrees[] = { 0, 45, 90, 135, 180, 225, 270, 315 }; + struct dw_mci *host = slot->host; + struct dw_mci_hi3798mv200_priv *priv = host->priv; + int raise_point = -1, fall_point = -1; + int err, prev_err = -1; + int found = 0; + int regval; + int i; + int ret; + + // enable tuning + ret = dw_mci_hi3798mv200_enable_tuning(slot); + if (ret < 0) + return ret; + for (i = 0; i < ARRAY_SIZE(degrees); i++) { + clk_set_phase(priv->sample_clk, degrees[i]); + mci_writel(host, RINTSTS, ALL_INT_CLR); + + err = mmc_send_tuning(slot->mmc, opcode, NULL); + if (!err) { + regval = mci_readl(host, TUNING_CTRL); + if (regval & SDMMC_TUNING_FIND_EDGE) + err = 1; + else + found = 1; + }; + + if (i > 0) { + if (err && !prev_err) + fall_point = i - 1; + if (!err && prev_err) + raise_point = i; + } + + if (raise_point != -1 && fall_point != -1) + goto tuning_out; + + prev_err = err; + err = 0; + } + +tuning_out: + ret = dw_mci_hi3798mv200_disable_tuning(slot); + if (ret < 0) + return ret; + if (found) { + if (raise_point == -1) + raise_point = 0; + if (fall_point == -1) + fall_point = ARRAY_SIZE(degrees) - 1; + if (fall_point < raise_point) { + if ((raise_point + fall_point) > + (ARRAY_SIZE(degrees) - 1)) + i = fall_point / 2; + else + i = (raise_point + ARRAY_SIZE(degrees) - 1) / 2; + } else { + i = (raise_point + fall_point) / 2; + } + + // use the same phase table for both HS200 and HS400 + priv->phase_map.phase[MMC_TIMING_MMC_HS200].in_deg = degrees[i]; + priv->phase_map.phase[MMC_TIMING_MMC_HS400].in_deg = degrees[i]; + + clk_set_phase(priv->sample_clk, degrees[i]); + dev_dbg(host->dev, "Tuning clk_sample[%d, %d], set[%d]\n", + raise_point, fall_point, degrees[i]); + err = 0; + } else { + dev_err(host->dev, "No valid clk_sample shift! use default\n"); + err = -EINVAL; + } + + mci_writel(host, RINTSTS, ALL_INT_CLR); + return err; +} + +static int dw_mci_hi3798mv200_init(struct dw_mci *host) +{ + struct dw_mci_hi3798mv200_priv *priv; + struct device_node *np = host->dev->of_node; + int ret; + + priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + mmc_of_parse_clk_phase(host->dev, &priv->phase_map); + + priv->sample_clk = devm_clk_get_enabled(host->dev, "ciu-sample"); + if (IS_ERR(priv->sample_clk)) + return dev_err_probe(host->dev, PTR_ERR(priv->sample_clk), + "failed to get enabled ciu-sample clock\n"); + + priv->drive_clk = devm_clk_get_enabled(host->dev, "ciu-drive"); + if (IS_ERR(priv->drive_clk)) + return dev_err_probe(host->dev, PTR_ERR(priv->drive_clk), + "failed to get enabled ciu-drive clock\n"); + + priv->crg_reg = syscon_regmap_lookup_by_phandle(np, "hisilicon,sap-dll-reg"); + if (IS_ERR(priv->crg_reg)) + return dev_err_probe(host->dev, PTR_ERR(priv->crg_reg), + "failed to get CRG reg\n"); + + ret = of_property_read_u32_index(np, "hisilicon,sap-dll-reg", 1, &priv->sap_dll_offset); + if (ret) + return dev_err_probe(host->dev, ret, "failed to get sample DLL register offset\n"); + + host->priv = priv; + return 0; +} + +static const struct dw_mci_drv_data hi3798mv200_data = { + .common_caps = MMC_CAP_CMD23, + .init = dw_mci_hi3798mv200_init, + .set_ios = dw_mci_hi3798mv200_set_ios, + .execute_tuning = dw_mci_hi3798mv200_execute_tuning_mix_mode, +}; + +static const struct of_device_id dw_mci_hi3798mv200_match[] = { + { .compatible = "hisilicon,hi3798mv200-dw-mshc" }, + {}, +}; + +static int dw_mci_hi3798mv200_probe(struct platform_device *pdev) +{ + return dw_mci_pltfm_register(pdev, &hi3798mv200_data); +} + +static void dw_mci_hi3798mv200_remove(struct platform_device *pdev) +{ + dw_mci_pltfm_remove(pdev); +} + +MODULE_DEVICE_TABLE(of, dw_mci_hi3798mv200_match); +static struct platform_driver dw_mci_hi3798mv200_driver = { + .probe = dw_mci_hi3798mv200_probe, + .remove_new = dw_mci_hi3798mv200_remove, + .driver = { + .name = "dwmmc_hi3798mv200", + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + .of_match_table = dw_mci_hi3798mv200_match, + }, +}; +module_platform_driver(dw_mci_hi3798mv200_driver); + +MODULE_DESCRIPTION("HiSilicon Hi3798MV200 Specific DW-MSHC Driver Extension"); +MODULE_LICENSE("GPL");