[v4,3/9] mmc: core: Add open-ended Ext memory addressing

Commit Message

Avri Altman Aug. 25, 2024, 7:41 a.m. UTC

For open-ended read/write - just send CMD22 before issuing the command.
While at it, make sure that the rw command arg is properly casting the
lower 32 bits, as it can be larger now.

Tested-by: Ricky WU <[e-mail]>
Signed-off-by: Avri Altman <[e-mail]>
---
 drivers/mmc/core/block.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

Patch

diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index 2c9963248fcb..8816b3f0a312 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -180,6 +180,7 @@  static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
 static void mmc_blk_hsq_req_done(struct mmc_request *mrq);
 static int mmc_spi_err_check(struct mmc_card *card);
 static int mmc_blk_busy_cb(void *cb_data, bool *busy);
+static int mmc_blk_wait_for_idle(struct mmc_queue *mq, struct mmc_host *host);
 
 static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk)
 {
@@ -1664,7 +1665,7 @@  static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
 
 	brq->mrq.cmd = &brq->cmd;
 
-	brq->cmd.arg = blk_rq_pos(req);
+	brq->cmd.arg = blk_rq_pos(req) & 0xFFFFFFFF;
 	if (!mmc_card_blockaddr(card))
 		brq->cmd.arg <<= 9;
 	brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
@@ -1712,6 +1713,9 @@  static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
 			(do_data_tag ? (1 << 29) : 0);
 		brq->sbc.flags = MMC_RSP_R1 | MMC_CMD_AC;
 		brq->mrq.sbc = &brq->sbc;
+	} else if (mmc_card_ult_capacity(card)) {
+		mmc_blk_wait_for_idle(mq, card->host);
+		mmc_send_ext_addr(card->host, blk_rq_pos(req));
 	}
 }