diff mbox series

[v1,4/5] mmc-utils: Added FFU mode 4 that uses CMD6 and CMD24 for single-block firmware download

Message ID 20241001203811.26279-5-beanhuo@iokpp.de (mailing list archive)
State New
Headers show
Series Add multiple FFU modes based on eMMC specification 6.6.18 for flexible firmware updates | expand

Commit Message

Bean Huo Oct. 1, 2024, 8:38 p.m. UTC 
From: Bean Huo <beanhuo@micron.com>

FFU mode 4 initiates firmware download with CMD6 to enter FFU mode, followed by CMD24 for
single-block write. After each block is written, CMD6 is used to exit FFU mode.

Signed-off-by: Bean Huo <beanhuo@micron.com>
---
 mmc.c     |  3 ++-
 mmc_ffu.c | 11 +++++++++--
 2 files changed, 11 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/mmc.c b/mmc.c
index 73b694d..2fdfdce 100644
--- a/mmc.c
+++ b/mmc.c
@@ -235,7 +235,8 @@  static struct Command commands[] = {
 		"[-m <ffu_mode>] Optional, provides five firmware bundle download command modes:\n"
 		" -m 1: Default mode (CMD6+CMD23+CMD25+CMD6 repeated), may exit FFU mode if the firmware size exceeds chunk size.\n"
 		" -m 2: FFU mode 2 (enter FFU mode, CMD23+CMD25 repeated, exit FFU mode), stays in FFU mode until firmware download completes.\n"
-		" -m 3: FFU mode 3 (enter FFU mode, CMD25+CMD12 repeated, exit FFU mode), stays in FFU mode until firmware download completes.\n",
+		" -m 3: FFU mode 3 (enter FFU mode, CMD25+CMD12 repeated, exit FFU mode), stays in FFU mode until firmware download completes.\n"
+		" -m 4: FFU mode 4 (CMD6+CMD24+CMD6 repeated), exits FFU mode after each cycle.\n",
 	  NULL
 	},
 	{ do_erase, -4,
diff --git a/mmc_ffu.c b/mmc_ffu.c
index 239d3b0..fff7b11 100644
--- a/mmc_ffu.c
+++ b/mmc_ffu.c
@@ -55,6 +55,11 @@  static void set_ffu_download_cmd(struct mmc_ioc_multi_cmd *multi_cmd, __u8 *ext_
 		set_single_cmd(&multi_cmd->cmds[1], MMC_STOP_TRANSMISSION, 0, 0, 0);
 		multi_cmd->cmds[1].flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
 
+	} else if (ffu_mode == 4) {
+		fill_switch_cmd(&multi_cmd->cmds[0], EXT_CSD_MODE_CONFIG, EXT_CSD_FFU_MODE);
+		set_single_cmd(&multi_cmd->cmds[1], MMC_WRITE_BLOCK, 1, 1, arg);
+		mmc_ioc_cmd_set_data(multi_cmd->cmds[1], buf + offset);
+		fill_switch_cmd(&multi_cmd->cmds[2], EXT_CSD_MODE_CONFIG, EXT_CSD_NORMAL_MODE);
 	}
 }
 
@@ -139,8 +144,10 @@  static int do_ffu_download(int *dev_fd, __u8 *ext_csd, __u8 *fw_buf, off_t fw_si
 		return -EINVAL;
 	}
 
-	if (ffu_mode != 1) /* only in FFU mode 1, mmc_ioc_multi_cmd contains 4 commands */
+	if (ffu_mode == 2 || ffu_mode == 3) /* only in FFU mode 1, mmc_ioc_multi_cmd contains 4 commands */
 		num_of_cmds = 2;
+	else if (ffu_mode == 4)
+		num_of_cmds = 3;
 
 	/* allocate maximum required */
 	multi_cmd = calloc(1, sizeof(struct mmc_ioc_multi_cmd) + num_of_cmds * sizeof(struct mmc_ioc_cmd));
@@ -238,7 +245,7 @@  int do_ffu(int nargs, char **argv)
 			break;
 		case 'm':
 			ffu_mode = atoi(optarg);
-			if (ffu_mode > 3) {
+			if (ffu_mode > 4) {
 				fprintf(stderr, "Unsupported ffu mode `%d'.\n", ffu_mode);
 				abort();
 			}