| Message ID | 20241022-x1e80100-qcp-sdhc-v3-3-46c401e32cbf@linaro.org (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: dts: qcom: x1e80100: Describe SDCs and enable support on QCP | expand |
On 22.10.2024 12:46 PM, Abel Vesa wrote: > One of the SD card slots found on the X Elite QCP board is > controlled by the SDC2. Enable it and describe the board > specific resources. > > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Konrad
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts index 1c3a6a7b3ed628e9e05002cf4b4505d9f4fb1a63..a82fabaaac9010ce3b8d6718b3425e84d8864171 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts @@ -729,6 +729,19 @@ &remoteproc_cdsp { status = "okay"; }; +&sdhc_2 { + cd-gpios = <&tlmm 71 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&sdc2_default &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>; + pinctrl-names = "default", "sleep"; + vmmc-supply = <&vreg_l9b_2p9>; + vqmmc-supply = <&vreg_l6b_1p8>; + bus-width = <4>; + no-sdio; + no-mmc; + status = "okay"; +}; + &smb2360_0_eusb2_repeater { vdd18-supply = <&vreg_l3d_1p8>; vdd3-supply = <&vreg_l2b_3p0>; @@ -870,6 +883,13 @@ wake-n-pins { }; }; + sdc2_card_det_n: sdc2-card-det-state { + pins = "gpio71"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + wcd_default: wcd-reset-n-active-state { pins = "gpio191"; function = "gpio";
One of the SD card slots found on the X Elite QCP board is controlled by the SDC2. Enable it and describe the board specific resources. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)