| Message ID | 20241107080505.29244-4-quic_sartgarg@quicinc.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Add level shifter support for qualcomm SOC's | expand |
On 7/11/24 10:05, Sarthak Garg wrote: > For Qualcomm SoCs with level shifter delays are seen on receivers data > path due to latency added by level shifter. > > To bring these delays in normal range and avoid CMD CRC errors > reduce frequency for HS mode SD cards to 37.5MHz for targets which has > level shifter. > > Signed-off-by: Sarthak Garg <quic_sartgarg@quicinc.com> > --- > drivers/mmc/host/sdhci-msm.c | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c > index 16325c21de52..5e1dc06c4707 100644 > --- a/drivers/mmc/host/sdhci-msm.c > +++ b/drivers/mmc/host/sdhci-msm.c > @@ -138,6 +138,8 @@ > /* Max load for eMMC Vdd-io supply */ > #define MMC_VQMMC_MAX_LOAD_UA 325000 > > +#define LEVEL_SHIFTER_HIGH_SPEED_FREQ 37500000 > + > #define msm_host_readl(msm_host, host, offset) \ > msm_host->var_ops->msm_readl_relaxed(host, offset) > > @@ -287,6 +289,7 @@ struct sdhci_msm_host { > bool use_cdr; > u32 transfer_mode; > bool updated_ddr_cfg; > + bool uses_level_shifter; > bool uses_tassadar_dll; > u32 dll_config; > u32 ddr_config; > @@ -366,6 +369,11 @@ static void msm_set_clock_rate_for_bus_mode(struct sdhci_host *host, > > mult = msm_get_clock_mult_for_bus_mode(host); > desired_rate = clock * mult; > + > + if (curr_ios.timing == MMC_TIMING_SD_HS && desired_rate == 50000000 Wouldn't desired_rate > LEVEL_SHIFTER_HIGH_SPEED_FREQ make more sense? > + && msm_host->uses_level_shifter) > + desired_rate = LEVEL_SHIFTER_HIGH_SPEED_FREQ; As checkpatch says: CHECK: Logical continuations should be on the previous line #46: FILE: drivers/mmc/host/sdhci-msm.c:374: + if (curr_ios.timing == MMC_TIMING_SD_HS && desired_rate == 50000000 + && msm_host->uses_level_shifter) total: 0 errors, 0 warnings, 1 checks, 34 lines checked > + > rc = dev_pm_opp_set_rate(mmc_dev(host->mmc), desired_rate); > if (rc) { > pr_err("%s: Failed to set clock at rate %u at timing %d\n", > @@ -2372,6 +2380,8 @@ static inline void sdhci_msm_get_of_property(struct platform_device *pdev, > > of_property_read_u32(node, "qcom,dll-config", &msm_host->dll_config); > > + msm_host->uses_level_shifter = of_property_read_bool(node, "qcom,use-level-shifter"); > + > if (of_device_is_compatible(node, "qcom,msm8916-sdhci")) > host->quirks2 |= SDHCI_QUIRK2_BROKEN_64_BIT_DMA; > }
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index 16325c21de52..5e1dc06c4707 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -138,6 +138,8 @@ /* Max load for eMMC Vdd-io supply */ #define MMC_VQMMC_MAX_LOAD_UA 325000 +#define LEVEL_SHIFTER_HIGH_SPEED_FREQ 37500000 + #define msm_host_readl(msm_host, host, offset) \ msm_host->var_ops->msm_readl_relaxed(host, offset) @@ -287,6 +289,7 @@ struct sdhci_msm_host { bool use_cdr; u32 transfer_mode; bool updated_ddr_cfg; + bool uses_level_shifter; bool uses_tassadar_dll; u32 dll_config; u32 ddr_config; @@ -366,6 +369,11 @@ static void msm_set_clock_rate_for_bus_mode(struct sdhci_host *host, mult = msm_get_clock_mult_for_bus_mode(host); desired_rate = clock * mult; + + if (curr_ios.timing == MMC_TIMING_SD_HS && desired_rate == 50000000 + && msm_host->uses_level_shifter) + desired_rate = LEVEL_SHIFTER_HIGH_SPEED_FREQ; + rc = dev_pm_opp_set_rate(mmc_dev(host->mmc), desired_rate); if (rc) { pr_err("%s: Failed to set clock at rate %u at timing %d\n", @@ -2372,6 +2380,8 @@ static inline void sdhci_msm_get_of_property(struct platform_device *pdev, of_property_read_u32(node, "qcom,dll-config", &msm_host->dll_config); + msm_host->uses_level_shifter = of_property_read_bool(node, "qcom,use-level-shifter"); + if (of_device_is_compatible(node, "qcom,msm8916-sdhci")) host->quirks2 |= SDHCI_QUIRK2_BROKEN_64_BIT_DMA; }
For Qualcomm SoCs with level shifter delays are seen on receivers data path due to latency added by level shifter. To bring these delays in normal range and avoid CMD CRC errors reduce frequency for HS mode SD cards to 37.5MHz for targets which has level shifter. Signed-off-by: Sarthak Garg <quic_sartgarg@quicinc.com> --- drivers/mmc/host/sdhci-msm.c | 10 ++++++++++ 1 file changed, 10 insertions(+)