| Message ID | 20241108130647.8281-1-wahrenst@gmx.net (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | [V2] mmc: pwrseq_simple: Handle !RESET_CONTROLLER properly | expand |
On 11/8/2024 5:06 AM, Stefan Wahren wrote: > The recent introduction of reset control in pwrseq_simple introduced > a regression for platforms without RESET_CONTROLLER support, because > devm_reset_control_get_optional_shared() would return NULL and make all > resets no-ops. Instead of enforcing this dependency, rely on this behavior > to determine reset support. As a benefit we can get the rid of the > use_reset flag. > > Fixes: 73bf4b7381f7 ("mmc: pwrseq_simple: add support for one reset control") > Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
On Fri, 8 Nov 2024 at 14:06, Stefan Wahren <wahrenst@gmx.net> wrote: > > The recent introduction of reset control in pwrseq_simple introduced > a regression for platforms without RESET_CONTROLLER support, because > devm_reset_control_get_optional_shared() would return NULL and make all > resets no-ops. Instead of enforcing this dependency, rely on this behavior > to determine reset support. As a benefit we can get the rid of the > use_reset flag. > > Fixes: 73bf4b7381f7 ("mmc: pwrseq_simple: add support for one reset control") > Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Applied for next, thanks! Kind regards Uffe > --- > drivers/mmc/core/pwrseq_simple.c | 20 +++++++++++--------- > 1 file changed, 11 insertions(+), 9 deletions(-) > > Changes in V2: > - add explaining comment as suggested by Marco Felsch > > diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c > index 24e4e63a5dc8..37cd858df0f4 100644 > --- a/drivers/mmc/core/pwrseq_simple.c > +++ b/drivers/mmc/core/pwrseq_simple.c > @@ -32,7 +32,6 @@ struct mmc_pwrseq_simple { > struct clk *ext_clk; > struct gpio_descs *reset_gpios; > struct reset_control *reset_ctrl; > - bool use_reset; > }; > > #define to_pwrseq_simple(p) container_of(p, struct mmc_pwrseq_simple, pwrseq) > @@ -71,7 +70,7 @@ static void mmc_pwrseq_simple_pre_power_on(struct mmc_host *host) > pwrseq->clk_enabled = true; > } > > - if (pwrseq->use_reset) { > + if (pwrseq->reset_ctrl) { > reset_control_deassert(pwrseq->reset_ctrl); > reset_control_assert(pwrseq->reset_ctrl); > } else > @@ -82,7 +81,7 @@ static void mmc_pwrseq_simple_post_power_on(struct mmc_host *host) > { > struct mmc_pwrseq_simple *pwrseq = to_pwrseq_simple(host->pwrseq); > > - if (pwrseq->use_reset) > + if (pwrseq->reset_ctrl) > reset_control_deassert(pwrseq->reset_ctrl); > else > mmc_pwrseq_simple_set_gpios_value(pwrseq, 0); > @@ -95,7 +94,7 @@ static void mmc_pwrseq_simple_power_off(struct mmc_host *host) > { > struct mmc_pwrseq_simple *pwrseq = to_pwrseq_simple(host->pwrseq); > > - if (pwrseq->use_reset) > + if (pwrseq->reset_ctrl) > reset_control_assert(pwrseq->reset_ctrl); > else > mmc_pwrseq_simple_set_gpios_value(pwrseq, 1); > @@ -137,15 +136,18 @@ static int mmc_pwrseq_simple_probe(struct platform_device *pdev) > return dev_err_probe(dev, PTR_ERR(pwrseq->ext_clk), "external clock not ready\n"); > > ngpio = of_count_phandle_with_args(dev->of_node, "reset-gpios", "#gpio-cells"); > - if (ngpio == 1) > - pwrseq->use_reset = true; > - > - if (pwrseq->use_reset) { > + if (ngpio == 1) { > pwrseq->reset_ctrl = devm_reset_control_get_optional_shared(dev, NULL); > if (IS_ERR(pwrseq->reset_ctrl)) > return dev_err_probe(dev, PTR_ERR(pwrseq->reset_ctrl), > "reset control not ready\n"); > - } else { > + } > + > + /* > + * Fallback to GPIO based reset control in case of multiple reset lines > + * are specified or the platform doesn't have support for RESET at all. > + */ > + if (!pwrseq->reset_ctrl) { > pwrseq->reset_gpios = devm_gpiod_get_array(dev, "reset", GPIOD_OUT_HIGH); > if (IS_ERR(pwrseq->reset_gpios) && > PTR_ERR(pwrseq->reset_gpios) != -ENOENT && > -- > 2.34.1 >
diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c index 24e4e63a5dc8..37cd858df0f4 100644 --- a/drivers/mmc/core/pwrseq_simple.c +++ b/drivers/mmc/core/pwrseq_simple.c @@ -32,7 +32,6 @@ struct mmc_pwrseq_simple { struct clk *ext_clk; struct gpio_descs *reset_gpios; struct reset_control *reset_ctrl; - bool use_reset; }; #define to_pwrseq_simple(p) container_of(p, struct mmc_pwrseq_simple, pwrseq) @@ -71,7 +70,7 @@ static void mmc_pwrseq_simple_pre_power_on(struct mmc_host *host) pwrseq->clk_enabled = true; } - if (pwrseq->use_reset) { + if (pwrseq->reset_ctrl) { reset_control_deassert(pwrseq->reset_ctrl); reset_control_assert(pwrseq->reset_ctrl); } else @@ -82,7 +81,7 @@ static void mmc_pwrseq_simple_post_power_on(struct mmc_host *host) { struct mmc_pwrseq_simple *pwrseq = to_pwrseq_simple(host->pwrseq); - if (pwrseq->use_reset) + if (pwrseq->reset_ctrl) reset_control_deassert(pwrseq->reset_ctrl); else mmc_pwrseq_simple_set_gpios_value(pwrseq, 0); @@ -95,7 +94,7 @@ static void mmc_pwrseq_simple_power_off(struct mmc_host *host) { struct mmc_pwrseq_simple *pwrseq = to_pwrseq_simple(host->pwrseq); - if (pwrseq->use_reset) + if (pwrseq->reset_ctrl) reset_control_assert(pwrseq->reset_ctrl); else mmc_pwrseq_simple_set_gpios_value(pwrseq, 1); @@ -137,15 +136,18 @@ static int mmc_pwrseq_simple_probe(struct platform_device *pdev) return dev_err_probe(dev, PTR_ERR(pwrseq->ext_clk), "external clock not ready\n"); ngpio = of_count_phandle_with_args(dev->of_node, "reset-gpios", "#gpio-cells"); - if (ngpio == 1) - pwrseq->use_reset = true; - - if (pwrseq->use_reset) { + if (ngpio == 1) { pwrseq->reset_ctrl = devm_reset_control_get_optional_shared(dev, NULL); if (IS_ERR(pwrseq->reset_ctrl)) return dev_err_probe(dev, PTR_ERR(pwrseq->reset_ctrl), "reset control not ready\n"); - } else { + } + + /* + * Fallback to GPIO based reset control in case of multiple reset lines + * are specified or the platform doesn't have support for RESET at all. + */ + if (!pwrseq->reset_ctrl) { pwrseq->reset_gpios = devm_gpiod_get_array(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(pwrseq->reset_gpios) && PTR_ERR(pwrseq->reset_gpios) != -ENOENT &&
The recent introduction of reset control in pwrseq_simple introduced a regression for platforms without RESET_CONTROLLER support, because devm_reset_control_get_optional_shared() would return NULL and make all resets no-ops. Instead of enforcing this dependency, rely on this behavior to determine reset support. As a benefit we can get the rid of the use_reset flag. Fixes: 73bf4b7381f7 ("mmc: pwrseq_simple: add support for one reset control") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> --- drivers/mmc/core/pwrseq_simple.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) Changes in V2: - add explaining comment as suggested by Marco Felsch -- 2.34.1