@@ -1512,6 +1512,34 @@ static void omap_hsmmc_init_card(struct mmc_host *mmc, struct mmc_card *card)
if (mmc_pdata(host)->init_card)
mmc_pdata(host)->init_card(card);
+ else if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
+ struct device_node *np = mmc_dev(mmc)->of_node;
+
+ /*
+ * REVISIT: should be moved to sdio core and made more
+ * general e.g. by expanding the DT bindings of child nodes
+ * to provide a mechanism to provide this information:
+ * Documentation/devicetree/bindings/mmc/mmc-card.txt
+ */
+
+ np = of_get_compatible_child(np, "ti,wl1251");
+ if (np) {
+ /*
+ * We have TI wl1251 attached to MMC3. Pass this information to
+ * SDIO core because it can't be probed by normal methods.
+ */
+
+ dev_info(host->dev, "found wl1251\n");
+ card->quirks |= MMC_QUIRK_NONSTD_SDIO;
+ card->cccr.wide_bus = 1;
+ card->cis.vendor = 0x104c;
+ card->cis.device = 0x9066;
+ card->cis.blksize = 512;
+ card->cis.max_dtr = 24000000;
+ card->ocr = 0x80;
+ of_node_put(np);
+ }
+ }
}
static void omap_hsmmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
Pandora_wl1251_init_card was used to do special pdata based setup of the sdio mmc interface. This does no longer work with v4.7 and later. A fix requires a device tree based mmc3 setup. Therefore we move the special setup to omap_hsmmc.c instead of calling some pdata supplied init_card function. The new code checks for a DT child node compatible to wl1251 so it will not affect other MMC3 use cases. Generally, this code was and still is a hack and should be moved to mmc core to e.g. read such properties from optional DT child nodes. Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel") Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Cc: <stable@vger.kernel.org> # 4.7.0 --- drivers/mmc/host/omap_hsmmc.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)