diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 76bb621..1d8409f 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -534,39 +534,57 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	 */
 	if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
 	    (host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) {
-		unsigned ext_csd_bit, bus_width;
-
-		if (host->caps & MMC_CAP_8_BIT_DATA) {
-			if (ddr)
-				ext_csd_bit = EXT_CSD_DDR_BUS_WIDTH_8;
-			else
-				ext_csd_bit = EXT_CSD_BUS_WIDTH_8;
-			bus_width = MMC_BUS_WIDTH_8;
-		} else {
-			if (ddr)
-				ext_csd_bit = EXT_CSD_DDR_BUS_WIDTH_4;
-			else
-				ext_csd_bit = EXT_CSD_BUS_WIDTH_4;
-			bus_width = MMC_BUS_WIDTH_4;
+		static unsigned ext_csd_bits[][2] = {
+			{ EXT_CSD_BUS_WIDTH_8, EXT_CSD_DDR_BUS_WIDTH_8 },
+			{ EXT_CSD_BUS_WIDTH_4, EXT_CSD_DDR_BUS_WIDTH_4 },
+			{ EXT_CSD_BUS_WIDTH_1, EXT_CSD_BUS_WIDTH_1 },
+		};
+		static unsigned bus_widths[] = {
+			MMC_BUS_WIDTH_8,
+			MMC_BUS_WIDTH_4,
+			MMC_BUS_WIDTH_1
+		};
+		unsigned idx, bus_width = 0;
+
+		if (host->caps & MMC_CAP_8_BIT_DATA)
+			idx = 0;
+		else
+			idx = 1;
+		for (; idx < ARRAY_SIZE(bus_widths); idx++) {
+			bus_width = bus_widths[idx];
+			if (bus_width == MMC_BUS_WIDTH_1)
+				ddr = 0; /* no DDR for 1-bit width */
+			err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+					 EXT_CSD_BUS_WIDTH,
+					 ext_csd_bits[idx][0]);
+			if (!err) {
+				/*
+				 * If controller can't handle bus width test,
+				 * use the highest bus width to maintain
+				 * compatibility with previous MMC behavior.
+				 */
+				if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST))
+					break;
+				mmc_set_bus_width_ddr(card->host,
+						      bus_width, MMC_SDR_MODE);
+				err = mmc_bus_test(card, bus_width);
+				if (!err)
+					break;
+			}
 		}
 
-		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-				 EXT_CSD_BUS_WIDTH, ext_csd_bit);
-
-		if (err && err != -EBADMSG)
-			goto free_card;
-
+		if (!err && ddr) {
+			err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+					EXT_CSD_BUS_WIDTH,
+					ext_csd_bits[idx][1]);
+		}
 		if (err) {
 			printk(KERN_WARNING "%s: switch to bus width %d ddr %d "
-			       "failed\n", mmc_hostname(card->host),
-			       1 << bus_width, ddr);
-			err = 0;
-		} else {
-			if (ddr)
-				mmc_card_set_ddr_mode(card);
-			else
-				ddr = MMC_SDR_MODE;
-
+				"failed\n", mmc_hostname(card->host),
+				1 << bus_width, ddr);
+			goto free_card;
+		} else if (ddr) {
+			mmc_card_set_ddr_mode(card);
 			mmc_set_bus_width_ddr(card->host, bus_width, ddr);
 		}
 	}
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 326447c..60842f8 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -462,3 +462,104 @@ int mmc_send_status(struct mmc_card *card, u32 *status)
 	return 0;
 }
 
+static int
+mmc_send_bus_test(struct mmc_card *card, struct mmc_host *host, u8 opcode,
+		  u8 len)
+{
+	struct mmc_request mrq;
+	struct mmc_command cmd;
+	struct mmc_data data;
+	struct scatterlist sg;
+	u8 *data_buf;
+	u8 *test_buf;
+	int i, err;
+	static u8 testdata_8bit[8] = { 0x55, 0xaa, 0, 0, 0, 0, 0, 0 };
+	static u8 testdata_4bit[4] = { 0x5a, 0, 0, 0 };
+
+	/* dma onto stack is unsafe/nonportable, but callers to this
+	 * routine normally provide temporary on-stack buffers ...
+	 */
+	data_buf = kmalloc(len, GFP_KERNEL);
+	if (!data_buf)
+		return -ENOMEM;
+
+	if (len == 8)
+		test_buf = testdata_8bit;
+	else if (len == 4)
+		test_buf = testdata_4bit;
+	else {
+		printk(KERN_ERR "%s: Invalid bus_width %d\n",
+		       mmc_hostname(host), len);
+		kfree(data_buf);
+		return -EINVAL;
+	}
+
+	if (opcode == MMC_BUS_TEST_W)
+		memcpy(data_buf, test_buf, len);
+
+	memset(&mrq, 0, sizeof(struct mmc_request));
+	memset(&cmd, 0, sizeof(struct mmc_command));
+	memset(&data, 0, sizeof(struct mmc_data));
+
+	mrq.cmd = &cmd;
+	mrq.data = &data;
+	cmd.opcode = opcode;
+	cmd.arg = 0;
+
+	/* NOTE HACK:  the MMC_RSP_SPI_R1 is always correct here, but we
+	 * rely on callers to never use this with "native" calls for reading
+	 * CSD or CID.  Native versions of those commands use the R2 type,
+	 * not R1 plus a data block.
+	 */
+	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
+
+	data.blksz = len;
+	data.blocks = 1;
+	if (opcode == MMC_BUS_TEST_R)
+		data.flags = MMC_DATA_READ;
+	else
+		data.flags = MMC_DATA_WRITE;
+
+	data.sg = &sg;
+	data.sg_len = 1;
+	sg_init_one(&sg, data_buf, len);
+	mmc_wait_for_req(host, &mrq);
+	err = 0;
+	if (opcode == MMC_BUS_TEST_R) {
+		for (i = 0; i < len / 4; i++)
+			if ((test_buf[i] ^ data_buf[i]) != 0xff) {
+				err = -EIO;
+				break;
+			}
+	}
+	kfree(data_buf);
+
+	if (cmd.error)
+		return cmd.error;
+	if (data.error)
+		return data.error;
+
+	return err;
+}
+
+int mmc_bus_test(struct mmc_card *card, u8 bus_width)
+{
+	int err, width;
+
+	if (bus_width == MMC_BUS_WIDTH_8)
+		width = 8;
+	else if (bus_width == MMC_BUS_WIDTH_4)
+		width = 4;
+	else if (bus_width == MMC_BUS_WIDTH_1)
+		return 0; /* no need for test */
+	else
+		return -EINVAL;
+
+	/*
+	 * Ignore errors from BUS_TEST_W.  BUS_TEST_R will fail if there
+	 * is a problem.  This improves chances that the test will work.
+	 */
+	mmc_send_bus_test(card, card->host, MMC_BUS_TEST_W, width);
+	err = mmc_send_bus_test(card, card->host, MMC_BUS_TEST_R, width);
+	return err;
+}
diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h
index 653eb8e..e6d44b8 100644
--- a/drivers/mmc/core/mmc_ops.h
+++ b/drivers/mmc/core/mmc_ops.h
@@ -26,6 +26,7 @@ int mmc_send_cid(struct mmc_host *host, u32 *cid);
 int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp);
 int mmc_spi_set_crc(struct mmc_host *host, int use_crc);
 int mmc_card_sleepawake(struct mmc_host *host, int sleep);
+int mmc_bus_test(struct mmc_card *card, u8 bus_width);
 
 #endif
 
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 5569886..d5febe5 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -23,6 +23,7 @@
 
 #include <linux/leds.h>
 
+#include <linux/mmc/mmc.h>
 #include <linux/mmc/host.h>
 
 #include "sdhci.h"
@@ -1521,7 +1522,11 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
 
 	if (intmask & SDHCI_INT_DATA_TIMEOUT)
 		host->data->error = -ETIMEDOUT;
-	else if (intmask & (SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_END_BIT))
+	else if (intmask & SDHCI_INT_DATA_END_BIT)
+		host->data->error = -EILSEQ;
+	else if ((intmask & SDHCI_INT_DATA_CRC) &&
+		SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))
+			!= MMC_BUS_TEST_R)
 		host->data->error = -EILSEQ;
 	else if (intmask & SDHCI_INT_ADMA_ERROR) {
 		printk(KERN_ERR "%s: ADMA error\n", mmc_hostname(host->mmc));
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 1efe7dc..6e0969e 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -52,6 +52,7 @@
 #define  SDHCI_CMD_RESP_SHORT_BUSY 0x03
 
 #define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff))
+#define SDHCI_GET_CMD(c) ((c>>8) & 0x3f)
 
 #define SDHCI_RESPONSE		0x10
 
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 3a85e73..bcb793e 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -172,6 +172,7 @@ struct mmc_host {
 #define MMC_CAP_1_2V_DDR	(1 << 12)	/* can support */
 						/* DDR mode at 1.2V */
 #define MMC_CAP_POWER_OFF_CARD	(1 << 13)	/* Can power off after boot */
+#define MMC_CAP_BUS_WIDTH_TEST	(1 << 14)	/* CMD14/CMD19 bus width ok */
 
 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
 
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index 956fbd87..612301f 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -40,7 +40,9 @@
 #define MMC_READ_DAT_UNTIL_STOP  11   /* adtc [31:0] dadr        R1  */
 #define MMC_STOP_TRANSMISSION    12   /* ac                      R1b */
 #define MMC_SEND_STATUS          13   /* ac   [31:16] RCA        R1  */
+#define MMC_BUS_TEST_R           14   /* adtc                    R1  */
 #define MMC_GO_INACTIVE_STATE    15   /* ac   [31:16] RCA            */
+#define MMC_BUS_TEST_W           19   /* adtc                    R1  */
 #define MMC_SPI_READ_OCR         58   /* spi                  spi_R3 */
 #define MMC_SPI_CRC_ON_OFF       59   /* spi  [0:0] flag      spi_R1 */
 
-- 
1.7.3.5



From 08c82dfad2458f8f9b83126224a85e7ea9e2b046 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Wed, 22 Dec 2010 09:59:44 +0100
Subject: [PATCH] mmc: fix mmc_set_bus_width_ddr() call without bus-width-test cap

With the bus-width test patch, mmc_set_bus_width*() isn't called properly
when the driver doesn't set MMC_CAP_BUS_WIDTH and no DDR mode.
This patch fixes the regression by moving the call up before the cap test.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
---
 drivers/mmc/core/mmc.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 1d8409f..c86dd73 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -558,6 +558,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 					 EXT_CSD_BUS_WIDTH,
 					 ext_csd_bits[idx][0]);
 			if (!err) {
+				mmc_set_bus_width_ddr(card->host,
+						      bus_width, MMC_SDR_MODE);
 				/*
 				 * If controller can't handle bus width test,
 				 * use the highest bus width to maintain
@@ -565,8 +567,6 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 				 */
 				if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST))
 					break;
-				mmc_set_bus_width_ddr(card->host,
-						      bus_width, MMC_SDR_MODE);
 				err = mmc_bus_test(card, bus_width);
 				if (!err)
 					break;
