From patchwork Thu Jan 9 09:15:16 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ben Chuang X-Patchwork-Id: 11325317 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 0E65B1398 for ; Thu, 9 Jan 2020 09:14:55 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id CBEFF2073A for ; Thu, 9 Jan 2020 09:14:54 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="UbpXomGm" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729303AbgAIJOy (ORCPT ); Thu, 9 Jan 2020 04:14:54 -0500 Received: from mail-pf1-f193.google.com ([209.85.210.193]:36958 "EHLO mail-pf1-f193.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728946AbgAIJOy (ORCPT ); Thu, 9 Jan 2020 04:14:54 -0500 Received: by mail-pf1-f193.google.com with SMTP id p14so3085000pfn.4; Thu, 09 Jan 2020 01:14:53 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=bjB+w3YtZtgGJqlFQbtPuwYxWcy4pFRsF5rah4vEdVA=; b=UbpXomGmgvtaHf0o8spuX/mwETHNlnb0KQRRRlH4ImcpYEB3XaWFwZgwF7YcZe8sSV hKRu7uD774gQIhSTwG9hdpkREnCRzNAW6Wtpurq7o3RkMPRj6rIkI/3pDIWrmWAohfTL +0WWieEJWMVBzUl23SekhOaDKUWVywshZo08VHbg+gdbZh7JfUmWar/skLtbp2ikeSa1 J+AEmOROdRz6EPyMKtxp5gZimVNz7mOCgd/ZsMZZFjcV0vpF/reu5HsfCExSx93IzYOf WLI7ixE/fssjNY7ukJr92bJtMqlVmMT+wfd6XtL3Ft7sCPtbNDPHFezh42mYU8yprTch bKcQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=bjB+w3YtZtgGJqlFQbtPuwYxWcy4pFRsF5rah4vEdVA=; b=S1fFTjnhBNe6OXpQhKkpIjsn4LnXSFKwZffcsyWWhhekhOKFLFn3RYpF5rHZ07fiNA Np4xNNdM1Y9ZSTLxufaD4kyV6fQsJPy2cEb2giftRIugjVensKNEL1kTb4R60U22l1Va MlFPvfHGS/SMJDt4rNV7vKcKmb+LyXCtvNdu+gb2skVbAXAuAxf90uKJ4tCIAdHbLV9l 7Yk5bYw2qJMKnGZhJGkrsq0tAicTLjCDGoNJlZ79P83XeWTWY3IYOuP++nyefTyk/GhV VdQFVCIK+OWtwsK8Rs/pf4myfoV3vaKHvddYocKCdNw9TqeCPrG2l5sXbXRhGYhobA0S fzDw== X-Gm-Message-State: APjAAAUd0lFVHjLnlnaEkeu19EmuSHTERmha/kOEwH3YB6+zVc5KKgwu yQouN1EJB7r5bFlcrsJSB++x3CPH X-Google-Smtp-Source: APXvYqygW7A/q6mGO+1TG14ViyL4VIJ8OFsx8PewmGYnL4A096HMJA7w+O7JZ1A3HHw3wUJtPu/9tg== X-Received: by 2002:aa7:9474:: with SMTP id t20mr9887640pfq.241.1578561293032; Thu, 09 Jan 2020 01:14:53 -0800 (PST) Received: from gli-arch.genesyslogic.com.tw (220-128-190-163.HINET-IP.hinet.net. [220.128.190.163]) by smtp.gmail.com with ESMTPSA id 144sm7383893pfc.124.2020.01.09.01.14.50 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 09 Jan 2020 01:14:52 -0800 (PST) From: Ben Chuang To: adrian.hunter@intel.com, ulf.hansson@linaro.org Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org, greg.tu@genesyslogic.com.tw, ben.chuang@genesyslogic.com.tw, Ben Chuang Subject: [RFC PATCH v2 6/6] mmc: sdhci-pci-gli: Fix power/reset/ZC/timeout for GL9755 UHS-II mode Date: Thu, 9 Jan 2020 17:15:16 +0800 Message-Id: <58988bcc0979969bba706a0eda94165b9cbae581.1578560282.git.benchuanggli@gmail.com> X-Mailer: git-send-email 2.24.1 In-Reply-To: References: MIME-Version: 1.0 Sender: linux-mmc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org From: Ben Chuang Disable GL9755 overcurrent interrupt when power on/off on UHS-II. Enable the internal clock when do reset on UHS-II mode. Set ZC to 0x0 for Sandisk cards and set ZC to 0xB for others. Increase timeout value before detecting UHS-II interface. Add vendor settings fro UHS-II mode. Signed-off-by: Ben Chuang --- drivers/mmc/host/sdhci-pci-gli.c | 361 ++++++++++++++++++++++++++++++- 1 file changed, 360 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c index 5eea8d70a85d..1be78a609dc3 100644 --- a/drivers/mmc/host/sdhci-pci-gli.c +++ b/drivers/mmc/host/sdhci-pci-gli.c @@ -14,6 +14,7 @@ #include #include "sdhci.h" #include "sdhci-pci.h" +#include "sdhci-uhs2.h" /* Genesys Logic extra registers */ #define SDHCI_GLI_9750_WT 0x800 @@ -60,6 +61,42 @@ #define SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY GENMASK(2, 0) #define GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE 0x1 +#define PCI_GLI_9755_WT 0x800 +#define PCI_GLI_9755_WT_EN BIT(0) +#define GLI_9755_WT_EN_ON 0x1 +#define GLI_9755_WT_EN_OFF 0x0 + +#define PCI_GLI_9755_PLLSSC 0x68 +#define PCI_GLI_9755_PLLSSC_RTL BIT(24) +#define GLI_9755_PLLSSC_RTL_VALUE 0x1 +#define PCI_GLI_9755_PLLSSC_TRANS_PASS BIT(27) +#define GLI_9755_PLLSSC_TRANS_PASS_VALUE 0x1 +#define PCI_GLI_9755_PLLSSC_RECV GENMASK(29, 28) +#define GLI_9755_PLLSSC_RECV_VALUE 0x3 +#define PCI_GLI_9755_PLLSSC_TRAN GENMASK(31, 30) +#define GLI_9755_PLLSSC_TRAN_VALUE 0x3 + +#define PCI_GLI_9755_UHS2_PLL 0x6C +#define PCI_GLI_9755_UHS2_PLL_SSC GENMASK(9, 8) +#define GLI_9755_UHS2_PLL_SSC_VALUE 0x0 +#define PCI_GLI_9755_UHS2_PLL_DELAY BIT(18) +#define GLI_9755_UHS2_PLL_DELAY_VALUE 0x1 +#define PCI_GLI_9755_UHS2_PLL_PDRST BIT(27) +#define GLI_9755_UHS2_PLL_PDRST_VALUE 0x1 + +#define PCI_GLI_9755_UHS2_SERDES 0x70 +#define PCI_GLI_9755_UHS2_SERDES_INTR GENMASK(2, 0) +#define GLI_9755_UHS2_SERDES_INTR_VALUE 0x3 +#define PCI_GLI_9755_UHS2_SERDES_ZC1 BIT(3) +#define GLI_9755_UHS2_SERDES_ZC1_VALUE 0x0 +#define PCI_GLI_9755_UHS2_SERDES_ZC2 GENMASK(7, 4) +#define GLI_9755_UHS2_SERDES_ZC2_DEFAULT 0xB +#define GLI_9755_UHS2_SERDES_ZC2_SANDISK 0x0 +#define PCI_GLI_9755_UHS2_SERDES_TRAN GENMASK(27, 24) +#define GLI_9755_UHS2_SERDES_TRAN_VALUE 0xC +#define PCI_GLI_9755_UHS2_SERDES_RECV GENMASK(31, 28) +#define GLI_9755_UHS2_SERDES_RECV_VALUE 0xF + #define GLI_MAX_TUNING_LOOP 40 /* Genesys Logic chipset */ @@ -262,6 +299,324 @@ static int gl9750_execute_tuning(struct sdhci_host *host, u32 opcode) return 0; } +static inline void gl9755_wt_on(struct pci_dev *pdev) +{ + u32 wt_value; + u32 wt_enable; + + pci_read_config_dword(pdev, PCI_GLI_9755_WT, &wt_value); + wt_enable = FIELD_GET(PCI_GLI_9755_WT_EN, wt_value); + + if (wt_enable == GLI_9755_WT_EN_ON) + return; + + wt_value &= ~PCI_GLI_9755_WT_EN; + wt_value |= FIELD_PREP(PCI_GLI_9755_WT_EN, GLI_9755_WT_EN_ON); + + pci_write_config_dword(pdev, PCI_GLI_9755_WT, wt_value); +} + +static inline void gl9755_wt_off(struct pci_dev *pdev) +{ + u32 wt_value; + u32 wt_enable; + + pci_read_config_dword(pdev, PCI_GLI_9755_WT, &wt_value); + wt_enable = FIELD_GET(PCI_GLI_9755_WT_EN, wt_value); + + if (wt_enable == GLI_9755_WT_EN_OFF) + return; + + wt_value &= ~PCI_GLI_9755_WT_EN; + wt_value |= FIELD_PREP(PCI_GLI_9755_WT_EN, GLI_9755_WT_EN_OFF); + + pci_write_config_dword(pdev, PCI_GLI_9755_WT, wt_value); +} + +static void gl9755_vendor_init(struct sdhci_host *host) +{ + struct sdhci_pci_slot *slot = sdhci_priv(host); + struct pci_dev *pdev = slot->chip->pdev; + u32 serdes; + u32 pllssc; + u32 uhs2_pll; + + gl9755_wt_on(pdev); + + pci_read_config_dword(pdev, PCI_GLI_9755_UHS2_SERDES, &serdes); + serdes &= ~PCI_GLI_9755_UHS2_SERDES_TRAN; + serdes |= FIELD_PREP(PCI_GLI_9755_UHS2_SERDES_TRAN, + GLI_9755_UHS2_SERDES_TRAN_VALUE); + serdes &= ~PCI_GLI_9755_UHS2_SERDES_RECV; + serdes |= FIELD_PREP(PCI_GLI_9755_UHS2_SERDES_RECV, + GLI_9755_UHS2_SERDES_RECV_VALUE); + serdes &= ~PCI_GLI_9755_UHS2_SERDES_INTR; + serdes |= FIELD_PREP(PCI_GLI_9755_UHS2_SERDES_INTR, + GLI_9755_UHS2_SERDES_INTR_VALUE); + serdes &= ~PCI_GLI_9755_UHS2_SERDES_ZC1; + serdes |= FIELD_PREP(PCI_GLI_9755_UHS2_SERDES_ZC1, + GLI_9755_UHS2_SERDES_ZC1_VALUE); + serdes &= ~PCI_GLI_9755_UHS2_SERDES_ZC2; + serdes |= FIELD_PREP(PCI_GLI_9755_UHS2_SERDES_ZC2, + GLI_9755_UHS2_SERDES_ZC2_DEFAULT); + pci_write_config_dword(pdev, PCI_GLI_9755_UHS2_SERDES, serdes); + + pci_read_config_dword(pdev, PCI_GLI_9755_UHS2_PLL, &uhs2_pll); + uhs2_pll &= ~PCI_GLI_9755_UHS2_PLL_SSC; + uhs2_pll |= FIELD_PREP(PCI_GLI_9755_UHS2_PLL_SSC, + GLI_9755_UHS2_PLL_SSC_VALUE); + uhs2_pll &= ~PCI_GLI_9755_UHS2_PLL_DELAY; + uhs2_pll |= FIELD_PREP(PCI_GLI_9755_UHS2_PLL_DELAY, + GLI_9755_UHS2_PLL_DELAY_VALUE); + uhs2_pll &= ~PCI_GLI_9755_UHS2_PLL_PDRST; + uhs2_pll |= FIELD_PREP(PCI_GLI_9755_UHS2_PLL_PDRST, + GLI_9755_UHS2_PLL_PDRST_VALUE); + pci_write_config_dword(pdev, PCI_GLI_9755_UHS2_PLL, uhs2_pll); + + pci_read_config_dword(pdev, PCI_GLI_9755_PLLSSC, &pllssc); + pllssc &= ~PCI_GLI_9755_PLLSSC_RTL; + pllssc |= FIELD_PREP(PCI_GLI_9755_PLLSSC_RTL, + GLI_9755_PLLSSC_RTL_VALUE); + pllssc &= ~PCI_GLI_9755_PLLSSC_TRANS_PASS; + pllssc |= FIELD_PREP(PCI_GLI_9755_PLLSSC_TRANS_PASS, + GLI_9755_PLLSSC_TRANS_PASS_VALUE); + pllssc &= ~PCI_GLI_9755_PLLSSC_RECV; + pllssc |= FIELD_PREP(PCI_GLI_9755_PLLSSC_RECV, + GLI_9755_PLLSSC_RECV_VALUE); + pllssc &= ~PCI_GLI_9755_PLLSSC_TRAN; + pllssc |= FIELD_PREP(PCI_GLI_9755_PLLSSC_TRAN, + GLI_9755_PLLSSC_TRAN_VALUE); + pci_write_config_dword(pdev, PCI_GLI_9755_PLLSSC, pllssc); + + gl9755_wt_off(pdev); +} + +static void gl9755_pre_detect_init(struct sdhci_host *host) +{ + /* GL9755 need more time on UHS2 detect flow */ + sdhci_writeb(host, 0xA7, SDHCI_UHS2_TIMER_CTRL); +} + +static void gl9755_post_attach_sd(struct sdhci_host *host) +{ + struct pci_dev *pdev; + struct sdhci_pci_chip *chip; + struct sdhci_pci_slot *slot; + u32 serdes; + + slot = sdhci_priv(host); + chip = slot->chip; + pdev = chip->pdev; + + gl9755_wt_on(pdev); + + pci_read_config_dword(pdev, PCI_GLI_9755_UHS2_SERDES, &serdes); + serdes &= ~PCI_GLI_9755_UHS2_SERDES_ZC1; + serdes &= ~PCI_GLI_9755_UHS2_SERDES_ZC2; + serdes |= FIELD_PREP(PCI_GLI_9755_UHS2_SERDES_ZC1, + GLI_9755_UHS2_SERDES_ZC1_VALUE); + + /* the manfid of sandisk card is 0x3 */ + if (host->mmc->card->cid.manfid == 0x3) + serdes |= FIELD_PREP(PCI_GLI_9755_UHS2_SERDES_ZC2, + GLI_9755_UHS2_SERDES_ZC2_SANDISK); + else + serdes |= FIELD_PREP(PCI_GLI_9755_UHS2_SERDES_ZC2, + GLI_9755_UHS2_SERDES_ZC2_DEFAULT); + + pci_write_config_dword(pdev, PCI_GLI_9755_UHS2_SERDES, serdes); + + gl9755_wt_off(pdev); +} + +static void gl9755_overcurrent_event_enable(struct sdhci_host *host, + bool enable) +{ + u32 mask; + + mask = sdhci_readl(host, SDHCI_SIGNAL_ENABLE); + if (enable) + mask |= SDHCI_INT_BUS_POWER; + else + mask &= ~SDHCI_INT_BUS_POWER; + + sdhci_writel(host, mask, SDHCI_SIGNAL_ENABLE); + + mask = sdhci_readl(host, SDHCI_INT_ENABLE); + if (enable) + mask |= SDHCI_INT_BUS_POWER; + else + mask &= ~SDHCI_INT_BUS_POWER; + + sdhci_writel(host, mask, SDHCI_INT_ENABLE); +} + +static void gl9755_set_power(struct sdhci_host *host, unsigned char mode, + unsigned short vdd, unsigned short vdd2) +{ + u8 pwr = 0; + + if (mode != MMC_POWER_OFF) { + switch (1 << vdd) { + case MMC_VDD_165_195: + /* + * Without a regulator, SDHCI does not support 2.0v + * so we only get here if the driver deliberately + * added the 2.0v range to ocr_avail. Map it to 1.8v + * for the purpose of turning on the power. + */ + case MMC_VDD_20_21: + pwr = SDHCI_POWER_180; + break; + case MMC_VDD_29_30: + case MMC_VDD_30_31: + pwr = SDHCI_POWER_300; + break; + case MMC_VDD_32_33: + case MMC_VDD_33_34: + pwr = SDHCI_POWER_330; + break; + default: + WARN(1, "%s: Invalid vdd %#x\n", + mmc_hostname(host->mmc), vdd); + break; + } + } + + if (mode != MMC_POWER_OFF) { + if (vdd2 != (unsigned short)-1) { + switch (1 << vdd2) { + case MMC_VDD2_165_195: + pwr |= SDHCI_VDD2_POWER_180; + break; + default: + WARN(1, "%s: Invalid vdd2 %#x\n", + mmc_hostname(host->mmc), vdd2); + break; + } + } + } + + if (host->pwr == pwr) + return; + + host->pwr = pwr; + + if (pwr == 0) { + gl9755_overcurrent_event_enable(host, false); + sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); + } else { + gl9755_overcurrent_event_enable(host, false); + sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); + + pwr |= SDHCI_POWER_ON; + if (vdd2 != (unsigned short)-1) + pwr |= SDHCI_VDD2_POWER_ON; + + sdhci_writeb(host, pwr&0xf, SDHCI_POWER_CONTROL); + /* wait stable */ + mdelay(5); + sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); + /* wait stable */ + mdelay(5); + gl9755_overcurrent_event_enable(host, true); + } +} + +static bool sdhci_wait_clock_stable(struct sdhci_host *host) +{ + u16 clk = 0; + ktime_t timeout; + + /* Wait max 20 ms */ + timeout = ktime_add_ms(ktime_get(), 20); + while (1) { + bool timedout = ktime_after(ktime_get(), timeout); + + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + if (clk & SDHCI_CLOCK_INT_STABLE) + break; + if (timedout) { + pr_err("%s: Internal clock never stabilised.\n", + mmc_hostname(host->mmc)); + sdhci_dumpregs(host); + return false; + } + udelay(10); + } + return true; +} + +static void gl9755_uhs2_reset_sd_tran(struct sdhci_host *host) +{ + /* do this on UHS2 mode */ + if (host->mmc->flags & MMC_UHS2_INITIALIZED) { + sdhci_uhs2_reset(host, SDHCI_UHS2_SW_RESET_SD); + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); + sdhci_uhs2_clear_set_irqs(host, + SDHCI_INT_ALL_MASK, + SDHCI_UHS2_ERR_INT_STATUS_MASK); + } +} + +static void sdhci_gl9755_reset(struct sdhci_host *host, u8 mask) +{ + ktime_t timeout; + u16 ctrl2; + u16 clk_ctrl; + + /* need internal clock */ + if (mask & SDHCI_RESET_ALL) { + ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + clk_ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + + if ((ctrl2 & SDHCI_CTRL_V4_MODE) && + (ctrl2 & SDHCI_CTRL_UHS2_INTERFACE_EN)) { + sdhci_writew(host, + SDHCI_CLOCK_INT_EN, + SDHCI_CLOCK_CONTROL); + } else { + sdhci_writew(host, + SDHCI_CLOCK_INT_EN, + SDHCI_CLOCK_CONTROL); + sdhci_wait_clock_stable(host); + sdhci_writew(host, + SDHCI_CTRL_V4_MODE, + SDHCI_HOST_CONTROL2); + } + } + + sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET); + + /* reset sd-tran on UHS2 mode if need to reset cmd/data */ + if ((mask & SDHCI_RESET_CMD) | (mask & SDHCI_RESET_DATA)) + gl9755_uhs2_reset_sd_tran(host); + + if (mask & SDHCI_RESET_ALL) + host->clock = 0; + + /* Wait max 100 ms */ + timeout = ktime_add_ms(ktime_get(), 100); + + /* hw clears the bit when it's done */ + while (1) { + bool timedout = ktime_after(ktime_get(), timeout); + + if (!(sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask)) + break; + if (timedout) { + pr_err("%s: Reset 0x%x never completed.\n", + mmc_hostname(host->mmc), (int)mask); + sdhci_dumpregs(host); + /* manual clear */ + sdhci_writeb(host, 0, SDHCI_SOFTWARE_RESET); + return; + } + udelay(10); + } +} + static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot) { struct sdhci_host *host = slot->host; @@ -278,6 +633,7 @@ static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot) slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO; sdhci_enable_v4_mode(host); + gl9755_vendor_init(host); return 0; } @@ -319,11 +675,14 @@ static u32 sdhci_gl9750_readl(struct sdhci_host *host, int reg) static const struct sdhci_ops sdhci_gl9755_ops = { .set_clock = sdhci_set_clock, + .set_power = gl9755_set_power, .enable_dma = sdhci_pci_enable_dma, .set_bus_width = sdhci_set_bus_width, - .reset = sdhci_reset, + .reset = sdhci_gl9755_reset, .set_uhs_signaling = sdhci_set_uhs_signaling, .voltage_switch = sdhci_gli_voltage_switch, + .uhs2_pre_detect_init = gl9755_pre_detect_init, + .uhs2_post_attach_sd = gl9755_post_attach_sd, }; const struct sdhci_pci_fixes sdhci_gl9755 = {