@@ -114,12 +114,15 @@
#define DWC_MSHC_PTR_PHY_R 0x300
/* PHY general configuration */
-#define PHY_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x00)
-#define PHY_CNFG_RSTN_DEASSERT 0x1 /* Deassert PHY reset */
-#define PHY_CNFG_PAD_SP_MASK GENMASK(19, 16) /* bits [19:16] */
-#define PHY_CNFG_PAD_SP 0x0c /* PMOS TX drive strength */
-#define PHY_CNFG_PAD_SN_MASK GENMASK(23, 20) /* bits [23:20] */
-#define PHY_CNFG_PAD_SN 0x0c /* NMOS TX drive strength */
+#define PHY_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x00)
+#define PHY_CNFG_RSTN_DEASSERT 0x1 /* Deassert PHY reset */
+#define PHY_CNFG_PHY_PWRGOOD_MASK BIT_MASK(1) /* bit [1] */
+#define PHY_CNFG_PAD_SP_MASK GENMASK(19, 16) /* bits [19:16] */
+#define PHY_CNFG_PAD_SP 0x0c /* PMOS TX drive strength */
+#define PHY_CNFG_PAD_SP_SG2042 0x09 /* PMOS TX drive strength for SG2042 */
+#define PHY_CNFG_PAD_SN_MASK GENMASK(23, 20) /* bits [23:20] */
+#define PHY_CNFG_PAD_SN 0x0c /* NMOS TX drive strength */
+#define PHY_CNFG_PAD_SN_SG2042 0x08 /* NMOS TX drive strength for SG2042 */
/* PHY command/response pad settings */
#define PHY_CMDPAD_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x04)
@@ -148,10 +151,12 @@
#define PHY_PAD_TXSLEW_CTRL_P 0x3 /* Slew control for P-Type pad TX */
#define PHY_PAD_TXSLEW_CTRL_N_MASK GENMASK(12, 9) /* bits [12:9] */
#define PHY_PAD_TXSLEW_CTRL_N 0x3 /* Slew control for N-Type pad TX */
+#define PHY_PAD_TXSLEW_CTRL_N_SG2042 0x2 /* Slew control for N-Type pad TX for SG2042 */
/* PHY CLK delay line settings */
#define PHY_SDCLKDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x1d)
-#define PHY_SDCLKDL_CNFG_UPDATE BIT(4) /* set before writing to SDCLKDL_DC */
+#define PHY_SDCLKDL_CNFG_EXTDLY_EN BIT(0)
+#define PHY_SDCLKDL_CNFG_UPDATE BIT(4) /* set before writing to SDCLKDL_DC */
/* PHY CLK delay line delay code */
#define PHY_SDCLKDL_DC_R (DWC_MSHC_PTR_PHY_R + 0x1e)
@@ -159,10 +164,14 @@
#define PHY_SDCLKDL_DC_DEFAULT 0x32 /* default delay code */
#define PHY_SDCLKDL_DC_HS400 0x18 /* delay code for HS400 mode */
+#define PHY_SMPLDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x20)
+#define PHY_SMPLDL_CNFG_BYPASS_EN BIT(1)
+
/* PHY drift_cclk_rx delay line configuration setting */
#define PHY_ATDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x21)
#define PHY_ATDL_CNFG_INPSEL_MASK GENMASK(3, 2) /* bits [3:2] */
#define PHY_ATDL_CNFG_INPSEL 0x3 /* delay line input source */
+#define PHY_ATDL_CNFG_INPSEL_SG2042 0x2 /* delay line input source for SG2042 */
/* PHY DLL control settings */
#define PHY_DLL_CTRL_R (DWC_MSHC_PTR_PHY_R + 0x24)
@@ -206,6 +215,11 @@ struct rk35xx_priv {
u8 txclk_tapnum;
};
+#define SG2042_MAX_CLKS 2
+struct sg2042_priv {
+ struct clk_bulk_data clks[SG2042_MAX_CLKS];
+};
+
struct dwcmshc_pltfm_data;
struct dwcmshc_priv {
struct clk *bus_clk;
@@ -1017,6 +1031,125 @@ static int cv18xx_sdhci_execute_tuning(struct sdhci_host *host, u32 opcode)
return ret;
}
+static inline void sg2042_sdhci_phy_init(struct sdhci_host *host)
+{
+ u32 val;
+
+ /* Asset phy reset & set tx drive strength */
+ val = sdhci_readl(host, PHY_CNFG_R);
+ val &= ~PHY_CNFG_RSTN_DEASSERT;
+ val |= FIELD_PREP(PHY_CNFG_PHY_PWRGOOD_MASK, 1);
+ val |= FIELD_PREP(PHY_CNFG_PAD_SP_MASK, PHY_CNFG_PAD_SP_SG2042);
+ val |= FIELD_PREP(PHY_CNFG_PAD_SN_MASK, PHY_CNFG_PAD_SN_SG2042);
+ sdhci_writel(host, val, PHY_CNFG_R);
+
+ /* Configure phy pads */
+ val = PHY_PAD_RXSEL_3V3;
+ val |= FIELD_PREP(PHY_PAD_WEAKPULL_MASK, PHY_PAD_WEAKPULL_PULLUP);
+ val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_P_MASK, PHY_PAD_TXSLEW_CTRL_P);
+ val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_N_MASK, PHY_PAD_TXSLEW_CTRL_N_SG2042);
+ sdhci_writew(host, val, PHY_CMDPAD_CNFG_R);
+ sdhci_writew(host, val, PHY_DATAPAD_CNFG_R);
+ sdhci_writew(host, val, PHY_RSTNPAD_CNFG_R);
+
+ val = PHY_PAD_RXSEL_3V3;
+ val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_P_MASK, PHY_PAD_TXSLEW_CTRL_P);
+ val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_N_MASK, PHY_PAD_TXSLEW_CTRL_N_SG2042);
+ sdhci_writew(host, val, PHY_CLKPAD_CNFG_R);
+
+ val = PHY_PAD_RXSEL_3V3;
+ val |= FIELD_PREP(PHY_PAD_WEAKPULL_MASK, PHY_PAD_WEAKPULL_PULLDOWN);
+ val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_P_MASK, PHY_PAD_TXSLEW_CTRL_P);
+ val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_N_MASK, PHY_PAD_TXSLEW_CTRL_N_SG2042);
+ sdhci_writew(host, val, PHY_STBPAD_CNFG_R);
+
+ /* Configure delay line */
+ /* Enable fixed delay */
+ sdhci_writeb(host, PHY_SDCLKDL_CNFG_EXTDLY_EN, PHY_SDCLKDL_CNFG_R);
+ /*
+ * Set delay line.
+ * Its recommended that bit UPDATE_DC[4] is 1 when SDCLKDL_DC is being written.
+ * Ensure UPDATE_DC[4] is '0' when not updating code.
+ */
+ val = sdhci_readb(host, PHY_SDCLKDL_CNFG_R);
+ val |= PHY_SDCLKDL_CNFG_UPDATE;
+ sdhci_writeb(host, val, PHY_SDCLKDL_CNFG_R);
+ /* Add 10 * 70ps = 0.7ns for output delay */
+ sdhci_writeb(host, 10, PHY_SDCLKDL_DC_R);
+ val = sdhci_readb(host, PHY_SDCLKDL_CNFG_R);
+ val &= ~(PHY_SDCLKDL_CNFG_UPDATE);
+ sdhci_writeb(host, val, PHY_SDCLKDL_CNFG_R);
+
+ /* Set SMPLDL_CNFG, Bypass */
+ sdhci_writeb(host, PHY_SMPLDL_CNFG_BYPASS_EN, PHY_SMPLDL_CNFG_R);
+
+ /* Set ATDL_CNFG, tuning clk not use for init */
+ val = FIELD_PREP(PHY_ATDL_CNFG_INPSEL_MASK, PHY_ATDL_CNFG_INPSEL_SG2042);
+ sdhci_writeb(host, val, PHY_ATDL_CNFG_R);
+
+ /* Deasset phy reset */
+ val = sdhci_readl(host, PHY_CNFG_R);
+ val |= PHY_CNFG_RSTN_DEASSERT;
+ sdhci_writel(host, val, PHY_CNFG_R);
+}
+
+static void sg2042_sdhci_reset(struct sdhci_host *host, u8 mask)
+{
+ sdhci_reset(host, mask);
+
+ if (mask & SDHCI_RESET_ALL)
+ sg2042_sdhci_phy_init(host);
+}
+
+static int sg2042_clks_enable(struct dwcmshc_priv *dwc_priv)
+{
+ int ret = 0;
+ struct sg2042_priv *soc = dwc_priv->priv;
+
+ if (soc)
+ ret = clk_bulk_prepare_enable(SG2042_MAX_CLKS, soc->clks);
+ return ret;
+}
+
+static void sg2042_clks_disable(struct dwcmshc_priv *dwc_priv)
+{
+ struct sg2042_priv *soc = dwc_priv->priv;
+
+ if (soc)
+ clk_bulk_disable_unprepare(SG2042_MAX_CLKS,
+ soc->clks);
+}
+
+static int sg2042_init(struct device *dev, struct sdhci_host *host,
+ struct dwcmshc_priv *dwc_priv)
+{
+ int err;
+ struct sg2042_priv *soc = NULL;
+
+ soc = devm_kzalloc(dev, sizeof(struct sg2042_priv), GFP_KERNEL);
+ if (!soc)
+ return -ENOMEM;
+
+ soc->clks[0].id = "card";
+ soc->clks[1].id = "timer";
+ err = devm_clk_bulk_get_optional(mmc_dev(host->mmc), SG2042_MAX_CLKS,
+ soc->clks);
+ if (err) {
+ dev_err(mmc_dev(host->mmc), "failed to get clocks %d\n", err);
+ return err;
+ }
+
+ err = clk_bulk_prepare_enable(SG2042_MAX_CLKS, soc->clks);
+ if (err) {
+ dev_err(mmc_dev(host->mmc), "failed to enable clocks %d\n", err);
+ return err;
+ }
+
+ dwc_priv->priv = soc;
+
+ return 0;
+}
+
static const struct sdhci_ops sdhci_dwcmshc_ops = {
.set_clock = sdhci_set_clock,
.set_bus_width = sdhci_set_bus_width,
@@ -1066,6 +1199,16 @@ static const struct dwcmshc_pltfm_data sdhci_dwcmshc_pdata = {
},
};
+static const struct sdhci_ops sdhci_dwcmshc_sg2042_ops = {
+ .set_clock = sdhci_set_clock,
+ .set_bus_width = sdhci_set_bus_width,
+ .set_uhs_signaling = dwcmshc_set_uhs_signaling,
+ .get_max_clock = dwcmshc_get_max_clock,
+ .reset = sg2042_sdhci_reset,
+ .adma_write_desc = dwcmshc_adma_write_desc,
+ .platform_execute_tuning = th1520_execute_tuning,
+};
+
#ifdef CONFIG_ACPI
static const struct dwcmshc_pltfm_data sdhci_dwcmshc_bf3_pdata = {
.pdata = {
@@ -1108,6 +1251,17 @@ static const struct dwcmshc_pltfm_data sdhci_dwcmshc_cv18xx_pdata = {
},
};
+static const struct dwcmshc_pltfm_data sdhci_dwcmshc_sg2042_pdata = {
+ .pdata = {
+ .ops = &sdhci_dwcmshc_sg2042_ops,
+ .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+ .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
+ },
+ .init = sg2042_init,
+ .clks_enable = sg2042_clks_enable,
+ .clks_disable = sg2042_clks_disable,
+};
+
static const struct cqhci_host_ops dwcmshc_cqhci_ops = {
.enable = dwcmshc_sdhci_cqe_enable,
.disable = sdhci_cqe_disable,
@@ -1200,6 +1354,10 @@ static const struct of_device_id sdhci_dwcmshc_dt_ids[] = {
.compatible = "thead,th1520-dwcmshc",
.data = &sdhci_dwcmshc_th1520_pdata,
},
+ {
+ .compatible = "sophgo,sg2042-dwcmshc",
+ .data = &sdhci_dwcmshc_sg2042_pdata,
+ },
{},
};
MODULE_DEVICE_TABLE(of, sdhci_dwcmshc_dt_ids);