@@ -17,6 +17,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
+#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/dma-mapping.h>
@@ -131,6 +132,7 @@ struct moxart_host {
struct mmc_host *mmc;
struct mmc_request *mrq;
struct scatterlist *cur_sg;
+ struct clk *clk;
struct completion dma_complete;
struct completion pio_complete;
@@ -560,9 +562,7 @@ static int moxart_probe(struct platform_device *pdev)
struct mmc_host *mmc;
struct moxart_host *host = NULL;
struct dma_slave_config cfg;
- struct clk *clk;
void __iomem *reg_mmc;
- dma_cap_mask_t mask;
int irq, ret;
u32 i;
@@ -586,10 +586,10 @@ static int moxart_probe(struct platform_device *pdev)
goto out;
}
- clk = of_clk_get(node, 0);
- if (IS_ERR(clk)) {
+ host->clk = of_clk_get(node, 0);
+ if (IS_ERR(host->clk)) {
dev_err(dev, "of_clk_get failed\n");
- ret = PTR_ERR(clk);
+ ret = PTR_ERR(host->clk);
goto out;
}
@@ -603,18 +603,15 @@ static int moxart_probe(struct platform_device *pdev)
if (ret)
goto out;
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
-
host = mmc_priv(mmc);
host->mmc = mmc;
host->base = reg_mmc;
host->reg_phys = res_mmc.start;
host->timeout = msecs_to_jiffies(1000);
- host->sysclk = clk_get_rate(clk);
+ host->sysclk = clk_get_rate(host->clk);
host->fifo_width = readl(host->base + REG_FEATURE) << 2;
- host->dma_chan_tx = of_dma_request_slave_channel(node, "tx");
- host->dma_chan_rx = of_dma_request_slave_channel(node, "rx");
+ host->dma_chan_tx = dma_request_slave_channel_reason(dev, "tx");
+ host->dma_chan_rx = dma_request_slave_channel_reason(dev, "rx");
spin_lock_init(&host->lock);
@@ -624,6 +621,11 @@ static int moxart_probe(struct platform_device *pdev)
mmc->ocr_avail = 0xffff00; /* Support 2.0v - 3.6v power. */
if (IS_ERR(host->dma_chan_tx) || IS_ERR(host->dma_chan_rx)) {
+ if (PTR_ERR(host->dma_chan_tx) == -EPROBE_DEFER ||
+ PTR_ERR(host->dma_chan_rx) == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto out;
+ }
dev_dbg(dev, "PIO mode transfer enabled\n");
host->have_dma = false;
} else {
@@ -677,6 +679,8 @@ static int moxart_probe(struct platform_device *pdev)
return 0;
out:
+ if (host->clk)
+ clk_put(host->clk);
if (mmc)
mmc_free_host(mmc);
return ret;
@@ -694,6 +698,7 @@ static int moxart_remove(struct platform_device *pdev)
dma_release_channel(host->dma_chan_tx);
if (!IS_ERR(host->dma_chan_rx))
dma_release_channel(host->dma_chan_rx);
+ clk_put(host->clk);
mmc_remove_host(mmc);
mmc_free_host(mmc);
@@ -702,9 +707,6 @@ static int moxart_remove(struct platform_device *pdev)
writel(readl(host->base + REG_CLOCK_CONTROL) | CLK_OFF,
host->base + REG_CLOCK_CONTROL);
}
-
- kfree(host);
-
return 0;
}
Jonas Jensen wanted to submit a patch for these, but apparently forgot about it. I stumbled over this symptom first: drivers/built-in.o: In function `moxart_probe': :(.text+0x2af128): undefined reference to `of_dma_request_slave_channel' This is because of_dma_request_slave_channel is an internal helper and not exported to loadable module. I'm changing the driver to use dma_request_slave_channel_reason() instead. Further problems from inspection: * The remove function must not call kfree on the host pointer, because it is allocated together with the mmc_host. * The clock is never released * The dma_cap_mask_t is completely unused and can be removed * deferred probing does not work if the dma driver is loaded after the mmc driver. This patch should fix all of the above. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- Jonas, can you check this patch and provide an Ack if it's ok? -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html