From f7e1cc9975cbed2d993d4209eae36f8f300fb18c Mon Sep 17 00:00:00 2001
From: Zhangfei Gao <zhangfei.gao@marvell.com>
Date: Sun, 26 Sep 2010 17:13:43 -0400
Subject: [PATCH 2/2] mmc: add support of sdhci-pxa driver
Support Marvell PXA168/PXA910/MMP2 SD Host Controller
Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
---
arch/arm/plat-pxa/include/plat/sdhci.h | 32 +++++++
drivers/mmc/host/Kconfig | 11 +++
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/sdhci-pxa.c | 143 ++++++++++++++++++++++++++++++++
4 files changed, 187 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/plat-pxa/include/plat/sdhci.h
create mode 100644 drivers/mmc/host/sdhci-pxa.c
new file mode 100644
@@ -0,0 +1,32 @@
+/* arch/arm/plat-pxa/include/plat/sdhci.h
+ *
+ * Copyright 2010 Marvell
+ * Zhangfei Gao <zhangfei.gao@marvell.com>
+ *
+ * PXA Platform - SDHCI platform data definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_PXA_SDHCI_H
+#define __PLAT_PXA_SDHCI_H __FILE__
+
+/* pxa specific quirks */
+/* Card alwayes wired to host, like emmc */
+#define PXA_QUIRK_BROKEN_CARD_DETECTION (1<<0)
+/* Require clock free running */
+#define PXA_QUIRK_DISABLE_CLOCK_GATING (1<<1)
+
+/**
+ * struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI
+ * @max_speed: The maximum speed supported.
+ * @pxa_quirks: specific quirk of pxa
+*/
+struct sdhci_pxa_platdata {
+ unsigned int max_speed;
+ unsigned int pxa_quirk;
+};
+
+#endif /* __PLAT_PXA_SDHCI_H */
@@ -158,6 +158,17 @@ config MMC_SDHCI_S3C
If unsure, say N.
+config MMC_SDHCI_PXA
+ tristate "Marvell PXA168/PXA910/MMP2 SD Host Controller support"
+ depends on ARCH_PXA || ARCH_MMP
+ depends on MMC_SDHCI_PLTFM
+ help
+ This selects the Marvell(R) PXA168/PXA910/MMP2 SD Host Controller.
+ If you have a PXA168/PXA910/MMP2 platform with SD Host Controller and a
+ card slot,say Y or M here.
+
+ If unsure, say N.
+
config MMC_SDHCI_SPEAR
tristate "SDHCI support on ST SPEAr platform"
depends on MMC_SDHCI && PLAT_SPEAR
@@ -38,6 +38,7 @@ obj-$(CONFIG_MMC_USHC) += ushc.o
obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-platform.o
sdhci-platform-y := sdhci-pltfm.o
sdhci-platform-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o
+sdhci-platform-$(CONFIG_MMC_SDHCI_PXA) += sdhci-pxa.o
obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o
sdhci-of-y := sdhci-of-core.o
new file mode 100644
@@ -0,0 +1,143 @@
+/* linux/drivers/mmc/host/sdhci-pxa.c
+ *
+ * Copyright 2010 Marvell
+ * Zhangfei Gao <zhangfei.gao@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* Supports:
+ * SDHCI support for MMP2/PXA910/PXA168
+ *
+ * Based on sdhci-pltfm.c
+ */
+
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <plat/sdhci.h>
+#include <linux/sdhci-pltfm.h>
+#include "sdhci.h"
+#include "sdhci-pltfm.h"
+
+#define SD_FIFO_PARAM 0x104
+#define DIS_PAD_SD_CLK_GATE 0x400
+
+struct sdhci_pxa {
+ struct sdhci_pxa_platdata *pdata;
+ struct clk *clk;
+
+ u32 quirks;
+ u8 clk_enable;
+};
+
+/*****************************************************************************\
+ * *
+ * SDHCI core callbacks *
+ * *
+\*****************************************************************************/
+static void sdhci_pxa_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+ struct sdhci_pxa *pxa = sdhci_priv(host);
+ u32 tmp = 0;
+
+ if (clock == 0) {
+ if (pxa->clk_enable) {
+ clk_disable(pxa->clk);
+ pxa->clk_enable = 0;
+ }
+ } else {
+ if (0 == pxa->clk_enable) {
+ if (pxa->pdata->pxa_quirk
+ & PXA_QUIRK_DISABLE_CLOCK_GATING) {
+ tmp = readl(host->ioaddr + SD_FIFO_PARAM);
+ tmp |= DIS_PAD_SD_CLK_GATE;
+ writel(tmp, host->ioaddr + SD_FIFO_PARAM);
+ }
+ clk_enable(pxa->clk);
+ pxa->clk_enable = 1;
+ }
+ }
+}
+
+static struct sdhci_ops sdhci_pxa_ops = {
+ .set_clock = sdhci_pxa_set_clock,
+};
+
+/*****************************************************************************\
+ * *
+ * sdhci-pltfm callbacks *
+ * *
+\*****************************************************************************/
+static int sdhci_pxa_init(struct sdhci_host *host, struct sdhci_pltfm_data *pdata, void* priv_pdata)
+{
+ struct sdhci_pxa *pxa = sdhci_priv(host);
+ struct device *dev = mmc_dev(host->mmc);
+
+ pxa->pdata = priv_pdata;
+ pxa->clk_enable = 0;
+
+ pxa->clk = clk_get(dev, "PXA-SDHCLK");
+ if (IS_ERR(pxa->clk)) {
+ dev_err(dev, "clk err\n");
+ return -ENODEV;
+ }
+ clk_enable(pxa->clk);
+ dev_dbg(dev, "SDHC clock:%lu\n", clk_get_rate(pxa->clk));
+
+ pxa->clk_enable = 0;
+ pxa->quirks = pdata->quirks;
+
+ if (pxa->pdata->pxa_quirk & PXA_QUIRK_BROKEN_CARD_DETECTION)
+ pxa->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+
+ return 0;
+}
+
+static unsigned int sdhci_pxa_get_quirk(struct sdhci_host *host)
+{
+ struct sdhci_pxa *pxa = sdhci_priv(host);
+
+ return pxa->quirks;
+}
+
+static void sdhci_pxa_set_max_speed(struct sdhci_host *host)
+{
+ struct sdhci_pxa *pxa = sdhci_priv(host);
+
+ if (pxa->pdata->max_speed)
+ host->mmc->f_max = pxa->pdata->max_speed;
+}
+
+static void sdhci_pxa_exit(struct sdhci_host *host)
+{
+ struct sdhci_pxa *pxa = sdhci_priv(host);
+
+ if (pxa->clk_enable)
+ clk_disable(pxa->clk);
+ clk_put(pxa->clk);
+}
+
+static struct sdhci_host *sdhci_pxa_alloc_host(struct device *dev)
+{
+ return sdhci_alloc_host(dev, sizeof(struct sdhci_pxa));
+}
+
+struct sdhci_pltfm_data sdhci_pxa_pdata = {
+ .ops = &sdhci_pxa_ops,
+ .quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
+ .init = sdhci_pxa_init,
+ .exit = sdhci_pxa_exit,
+ .get_quirk = sdhci_pxa_get_quirk,
+ .set_max_speed = sdhci_pxa_set_max_speed,
+ .alloc_host = sdhci_pxa_alloc_host,
+};
+
+MODULE_DESCRIPTION("SDH controller driver for PXA168/PXA910/MMP2");
+MODULE_AUTHOR("Zhangfei Gao <zhangfei.gao@marvell.com>");
+MODULE_LICENSE("GPL v2");
--
1.7.0.4