deleted file mode 100644
@@ -1,67 +0,0 @@
-* Spreadtrum SDHCI controller (sdhci-sprd)
-
-The Secure Digital (SD) Host controller on Spreadtrum SoCs provides an interface
-for MMC, SD and SDIO types of cards.
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the sdhci-sprd driver.
-
-Required properties:
-- compatible: Should contain "sprd,sdhci-r11".
-- reg: physical base address of the controller and length.
-- interrupts: Interrupts used by the SDHCI controller.
-- clocks: Should contain phandle for the clock feeding the SDHCI controller
-- clock-names: Should contain the following:
- "sdio" - SDIO source clock (required)
- "enable" - gate clock which used for enabling/disabling the device (required)
- "2x_enable" - gate clock controlling the device for some special platforms (optional)
-
-Optional properties:
-- assigned-clocks: the same with "sdio" clock
-- assigned-clock-parents: the default parent of "sdio" clock
-- pinctrl-names: should be "default", "state_uhs"
-- pinctrl-0: should contain default/high speed pin control
-- pinctrl-1: should contain uhs mode pin control
-
-PHY DLL delays are used to delay the data valid window, and align the window
-to sampling clock. PHY DLL delays can be configured by following properties,
-and each property contains 4 cells which are used to configure the clock data
-write line delay value, clock read command line delay value, clock read data
-positive edge delay value and clock read data negative edge delay value.
-Each cell's delay value unit is cycle of the PHY clock.
-
-- sprd,phy-delay-legacy: Delay value for legacy timing.
-- sprd,phy-delay-sd-highspeed: Delay value for SD high-speed timing.
-- sprd,phy-delay-sd-uhs-sdr50: Delay value for SD UHS SDR50 timing.
-- sprd,phy-delay-sd-uhs-sdr104: Delay value for SD UHS SDR50 timing.
-- sprd,phy-delay-mmc-highspeed: Delay value for MMC high-speed timing.
-- sprd,phy-delay-mmc-ddr52: Delay value for MMC DDR52 timing.
-- sprd,phy-delay-mmc-hs200: Delay value for MMC HS200 timing.
-- sprd,phy-delay-mmc-hs400: Delay value for MMC HS400 timing.
-- sprd,phy-delay-mmc-hs400es: Delay value for MMC HS400 enhanced strobe timing.
-
-Examples:
-
-sdio0: sdio@20600000 {
- compatible = "sprd,sdhci-r11";
- reg = <0 0x20600000 0 0x1000>;
- interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-
- clock-names = "sdio", "enable";
- clocks = <&ap_clk CLK_EMMC_2X>,
- <&apahb_gate CLK_EMMC_EB>;
- assigned-clocks = <&ap_clk CLK_EMMC_2X>;
- assigned-clock-parents = <&rpll CLK_RPLL_390M>;
-
- pinctrl-names = "default", "state_uhs";
- pinctrl-0 = <&sd0_pins_default>;
- pinctrl-1 = <&sd0_pins_uhs>;
-
- sprd,phy-delay-sd-uhs-sdr104 = <0x3f 0x7f 0x2e 0x2e>;
- bus-width = <8>;
- non-removable;
- no-sdio;
- no-sd;
- cap-mmc-hw-reset;
- status = "okay";
-};
new file mode 100644
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/sprd,sdhci-r11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SDHCI controller
+
+maintainers:
+ - Orson Zhai <orsonzhai@gmail.com>
+ - Baolin Wang <baolin.wang7@gmail.com>
+ - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+ compatible:
+ const: sprd,sdhci-r11
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ items:
+ - description: SDIO source clock
+ - description: gate clock for enabling/disabling the device
+ - description: gate clock controlling the device for some special platforms (optional)
+
+ clock-names:
+ minItems: 2
+ items:
+ - const: sdio
+ - const: enable
+ - const: 2x_enable
+
+ assigned-clocks:
+ maxItems: 1
+
+ assigned-clock-parents:
+ maxItems: 1
+
+ pinctrl-0:
+ description: default/high speed pin control
+ maxItems: 1
+
+ pinctrl-1:
+ description: UHS mode pin control
+ maxItems: 1
+
+ pinctrl-names:
+ minItems: 1
+ items:
+ - const: default
+ - const: state_uhs
+
+patternProperties:
+ "^sprd,phy-delay-(legacy|mmc-(ddr52|highspeed|hs[24]00|hs400es)|sd-(highspeed|uhs-sdr(50|104)))$":
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: clock data write line delay value
+ - description: clock read command line delay value
+ - description: clock read data positive edge delay value
+ - description: clock read data negative edge delay value
+ description:
+ PHY DLL delays are used to delay the data valid window, and align
+ the window to the sampling clock. Each cell's delay value unit is
+ cycle of the PHY clock.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+allOf:
+ - $ref: sdhci-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/sprd,sc9860-clk.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ mmc@50430000 {
+ compatible = "sprd,sdhci-r11";
+ reg = <0x50430000 0x1000>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&aon_prediv CLK_EMMC_2X>,
+ <&apahb_gate CLK_EMMC_EB>,
+ <&aon_gate CLK_EMMC_2X_EN>;
+ clock-names = "sdio", "enable", "2x_enable";
+ assigned-clocks = <&aon_prediv CLK_EMMC_2X>;
+ assigned-clock-parents = <&clk_l0_409m6>;
+
+ pinctrl-0 = <&sd0_pins_default>;
+ pinctrl-1 = <&sd0_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ bus-width = <8>;
+ cap-mmc-hw-reset;
+ mmc-hs400-enhanced-strobe;
+ mmc-hs400-1_8v;
+ mmc-hs200-1_8v;
+ mmc-ddr-1_8v;
+ non-removable;
+ no-sdio;
+ no-sd;
+
+ sprd,phy-delay-mmc-ddr52 = <0x3f 0x75 0x14 0x14>;
+ sprd,phy-delay-mmc-hs200 = <0x0 0x8c 0x8c 0x8c>;
+ sprd,phy-delay-mmc-hs400 = <0x44 0x7f 0x2e 0x2e>;
+ sprd,phy-delay-mmc-hs400es = <0x3f 0x3f 0x2e 0x2e>;
+ };
+...
Covert the Spreadtrum SDHCI controller bindings to DT schema. Rename the file to match compatible. Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com> --- Node name adjustments in DTS are being handled as part of: https://lore.kernel.org/lkml/cover.1720112081.git.stano.jakubek@gmail.com/ .../devicetree/bindings/mmc/sdhci-sprd.txt | 67 ---------- .../bindings/mmc/sprd,sdhci-r11.yaml | 120 ++++++++++++++++++ 2 files changed, 120 insertions(+), 67 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mmc/sdhci-sprd.txt create mode 100644 Documentation/devicetree/bindings/mmc/sprd,sdhci-r11.yaml