@@ -49,6 +49,7 @@
*.zst
Module.symvers
modules.order
+modules_thick.builtin
#
# Top-level generic files
@@ -183,6 +183,7 @@ modules.builtin
modules.builtin.modinfo
modules.nsdeps
modules.order
+modules_thick.builtin
modversions.h*
nconf
nconf-cfg
@@ -1507,6 +1507,23 @@ __modinst_pre:
endif # CONFIG_MODULES
+# modules_thick.builtin maps from kernel modules (or rather the object file
+# names they would have had had they not been built in) to their constituent
+# object files: we can use this to determine which modules any given object
+# file is part of. (We cannot eliminate the slight redundancy here without
+# double-expansion.)
+
+modthickbuiltin-files := $(addsuffix /modules_thick.builtin, $(build-dirs))
+
+modules_thick.builtin: $(modthickbuiltin-files)
+ $(Q)$(AWK) '!x[$$0]++' $(addsuffix /$@, $(build-dirs)) > $@
+
+# tristate.conf is not included from this Makefile. Add it as a prerequisite
+# here to make it self-healing in case somebody accidentally removes it.
+$(modthickbuiltin-files): include/config/tristate.conf
+ $(Q)$(MAKE) $(modbuiltin)=$(patsubst %/modules_thick.builtin,%,$@) builtin-file=modules_thick.builtin
+
+
###
# Cleaning is done on three levels.
# make clean Delete most generated files
@@ -1886,7 +1903,7 @@ clean: $(clean-dirs)
-o -name '*.lex.c' -o -name '*.tab.[ch]' \
-o -name '*.asn1.[ch]' \
-o -name '*.symtypes' -o -name 'modules.order' \
- -o -name '.tmp_*.o.*' \
+ -o -name '.tmp_*.o.*' -o -name modules_thick.builtin \
-o -name '*.c.[012]*.*' \
-o -name '*.ll' \
-o -name '*.gcno' \
@@ -74,6 +74,12 @@ endef
# $(Q)$(MAKE) $(build)=dir
build := -f $(srctree)/scripts/Makefile.build obj
+###
+# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.modbuiltin obj=
+# Usage:
+# $(Q)$(MAKE) $(modbuiltin)=dir
+modbuiltin := -f $(srctree)/scripts/Makefile.modbuiltin obj
+
###
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.dtbinst obj=
# Usage:
new file mode 100644
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0
+# ==========================================================================
+# Generating modules_thick.builtin
+# ==========================================================================
+
+src := $(obj)
+
+PHONY := __modbuiltin
+__modbuiltin:
+
+include include/config/auto.conf
+# tristate.conf sets tristate variables to uppercase 'Y' or 'M'
+# That way, we get the list of built-in modules in obj-Y
+include include/config/tristate.conf
+
+include scripts/Kbuild.include
+
+ifdef building_out_of_srctree
+# Create output directory if not already present
+_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))
+endif
+
+# The filename Kbuild has precedence over Makefile
+kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
+kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile)
+include $(kbuild-file)
+
+include scripts/Makefile.lib
+
+modthickbuiltin-subdirs := $(patsubst %,%/modules_thick.builtin, $(subdir-ym))
+modthickbuiltin-target := $(obj)/modules_thick.builtin
+
+__modbuiltin: $(obj)/$(builtin-file) $(subdir-ym)
+ @:
+
+$(modthickbuiltin-target): $(subdir-ym) FORCE
+ $(Q) rm -f $@
+ $(Q) $(foreach mod-o, $(filter %.o,$(obj-Y)),\
+ printf "%s:" $(addprefix $(obj)/,$(mod-o)) >> $@; \
+ printf " %s" $(sort $(strip $(addprefix $(obj)/,$($(mod-o:.o=-objs)) \
+ $($(mod-o:.o=-y)) $($(mod-o:.o=-Y))))) >> $@; \
+ printf "\n" >> $@; ) \
+ cat /dev/null $(modthickbuiltin-subdirs) >> $@;
+
+PHONY += FORCE
+
+FORCE:
+
+# Descending
+# ---------------------------------------------------------------------------
+
+PHONY += $(subdir-ym)
+$(subdir-ym):
+ $(Q)$(MAKE) $(modbuiltin)=$@ builtin-file=$(builtin-file)
+
+.PHONY: $(PHONY)
new file mode 100644
@@ -0,0 +1,200 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * A simple modules_thick reader.
+ *
+ * (C) 2014, 2021 Oracle, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <errno.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include "modules_thick.h"
+
+/*
+ * Read a modules_thick.builtin file and translate it into a stream of
+ * name / module-name pairs.
+ */
+
+/*
+ * Construct a modules_thick.builtin iterator.
+ */
+struct modules_thick_iter *
+modules_thick_iter_new(const char *modules_thick_file)
+{
+ struct modules_thick_iter *i;
+
+ i = calloc(1, sizeof(struct modules_thick_iter));
+ if (i == NULL)
+ return NULL;
+
+ i->f = fopen(modules_thick_file, "r");
+
+ if (i->f == NULL) {
+ fprintf(stderr, "Cannot open builtin module file %s: %s\n",
+ modules_thick_file, strerror(errno));
+ return NULL;
+ }
+
+ return i;
+}
+
+/*
+ * Iterate, returning a new null-terminated array of object file names, and a
+ * new dynamically-allocated module name. (The module name passed in is freed.)
+ *
+ * The array of object file names should be freed by the caller: the strings it
+ * points to are owned by the iterator, and should not be freed.
+ */
+
+char ** __attribute__((__nonnull__))
+modules_thick_iter_next(struct modules_thick_iter *i, char **module_name)
+{
+ size_t npaths = 1;
+ char **module_paths;
+ char *last_slash;
+ char *last_dot;
+ char *trailing_linefeed;
+ char *object_name = i->line;
+ char *dash;
+ int composite = 0;
+
+ /*
+ * Read in all module entries, computing the suffixless, pathless name
+ * of the module and building the next arrayful of object file names for
+ * return.
+ *
+ * Modules can consist of multiple files: in this case, the portion
+ * before the colon is the path to the module (as before): the portion
+ * after the colon is a space-separated list of files that should be
+ * considered part of this module. In this case, the portion before the
+ * name is an "object file" that does not actually exist: it is merged
+ * into built-in.a without ever being written out.
+ *
+ * All module names have - translated to _, to match what is done to the
+ * names of the same things when built as modules.
+ */
+
+ /*
+ * Reinvocation of exhausted iterator. Return NULL, once.
+ */
+retry:
+ if (getline(&i->line, &i->line_size, i->f) < 0) {
+ if (ferror(i->f)) {
+ fprintf(stderr, "Error reading from modules_thick file:"
+ " %s\n", strerror(errno));
+ exit(1);
+ }
+ rewind(i->f);
+ return NULL;
+ }
+
+ if (i->line[0] == '\0')
+ goto retry;
+
+ /*
+ * Slice the line in two at the colon, if any. If there is anything
+ * past the ': ', this is a composite module. (We allow for no colon
+ * for robustness, even though one should always be present.)
+ */
+ if (strchr(i->line, ':') != NULL) {
+ char *name_start;
+
+ object_name = strchr(i->line, ':');
+ *object_name = '\0';
+ object_name++;
+ name_start = object_name + strspn(object_name, " \n");
+ if (*name_start != '\0') {
+ composite = 1;
+ object_name = name_start;
+ }
+ }
+
+ /*
+ * Figure out the module name.
+ */
+ last_slash = strrchr(i->line, '/');
+ last_slash = (!last_slash) ? i->line :
+ last_slash + 1;
+ free(*module_name);
+ *module_name = strdup(last_slash);
+ dash = *module_name;
+
+ while (dash != NULL) {
+ dash = strchr(dash, '-');
+ if (dash != NULL)
+ *dash = '_';
+ }
+
+ last_dot = strrchr(*module_name, '.');
+ if (last_dot != NULL)
+ *last_dot = '\0';
+
+ trailing_linefeed = strchr(object_name, '\n');
+ if (trailing_linefeed != NULL)
+ *trailing_linefeed = '\0';
+
+ /*
+ * Multifile separator? Object file names explicitly stated:
+ * slice them up and shuffle them in.
+ *
+ * The array size may be an overestimate if any object file
+ * names start or end with spaces (very unlikely) but cannot be
+ * an underestimate. (Check for it anyway.)
+ */
+ if (composite) {
+ char *one_object;
+
+ for (npaths = 0, one_object = object_name;
+ one_object != NULL;
+ npaths++, one_object = strchr(one_object + 1, ' '));
+ }
+
+ module_paths = malloc((npaths + 1) * sizeof(char *));
+ if (!module_paths) {
+ fprintf(stderr, "%s: out of memory on module %s\n", __func__,
+ *module_name);
+ exit(1);
+ }
+
+ if (composite) {
+ char *one_object;
+ size_t i = 0;
+
+ while ((one_object = strsep(&object_name, " ")) != NULL) {
+ if (i >= npaths) {
+ fprintf(stderr, "%s: num_objs overflow on module "
+ "%s: this is a bug.\n", __func__,
+ *module_name);
+ exit(1);
+ }
+
+ module_paths[i++] = one_object;
+ }
+ } else
+ module_paths[0] = i->line; /* untransformed module name */
+
+ module_paths[npaths] = NULL;
+
+ return module_paths;
+}
+
+/*
+ * Free an iterator. Can be called while iteration is underway, so even
+ * state that is freed at the end of iteration must be freed here too.
+ */
+void
+modules_thick_iter_free(struct modules_thick_iter *i)
+{
+ if (i == NULL)
+ return;
+ fclose(i->f);
+ free(i->line);
+ free(i);
+}
new file mode 100644
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * A simple modules_thick reader.
+ *
+ * (C) 2014, 2021 Oracle, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _LINUX_MODULES_THICK_H
+#define _LINUX_MODULES_THICK_H
+
+#include <stdio.h>
+#include <stddef.h>
+
+/*
+ * modules_thick.builtin iteration state.
+ */
+struct modules_thick_iter {
+ FILE *f;
+ char *line;
+ size_t line_size;
+};
+
+/*
+ * Construct a modules_thick.builtin iterator.
+ */
+struct modules_thick_iter *
+modules_thick_iter_new(const char *modules_thick_file);
+
+/*
+ * Iterate, returning a new null-terminated array of object file names, and a
+ * new dynamically-allocated module name. (The module name passed in is freed.)
+ *
+ * The array of object file names should be freed by the caller: the strings it
+ * points to are owned by the iterator, and should not be freed.
+ */
+
+char ** __attribute__((__nonnull__))
+modules_thick_iter_next(struct modules_thick_iter *i, char **module_name);
+
+void
+modules_thick_iter_free(struct modules_thick_iter *i);
+
+#endif
This is similar to modules.builtin, and constructed in a similar way to the way that used to be built before commit 8b41fc4454e36fbfdbb23f940d023d4dece2de29, via tristate.conf inclusion and recursive concatenation up the tree. Unlike modules.builtin, modules_thick.builtin givs the names of the object files that make up modules that are comprised of more than one object file, using a syntax similar to that of makefiles, e.g.: crypto/crypto.o: crypto/api.o crypto/cipher.o crypto/compress.o crypto/memneq.o crypto/crypto_algapi.o: crypto/algapi.o crypto/proc.o crypto/scatterwalk.o crypto/aead.o: crypto/geniv.o: (where the latter two are single-file modules). An upcoming commit will use this mapping to populate /proc/kallmodsyms. A parser is included that yields a stram of (module, objfile name[]) mappings: it's a bit baroque, but then parsing text files in C is quite painful, and I'd rather put the complexity in here than in its callers. The parser is not built in this commit, nor does it have any callers yet; nor is any rule added that causes modules_thick.builtin to actually be constructed. (Again, see a later commit for that.) I am not wedded to the approach used to construct this file, but I don't see any other way to do it despite spending a week or so trying to tie it into Kbuild without using a separate Makefile.modbuiltin: unlike the names of builtin modules (which are also recorded in the source files themseves via MODULE_*() macros) the mapping from object file name to built-in module name is not recorded anywhere but in the makefiles themselves, so we have to at least reparse them with something to indicate the builtin-ness of each module (i.e., tristate.conf) if we are to figure out which modules are built-in and which are not. Signed-off-by: Nick Alcock <nick.alcock@oracle.com> --- .gitignore | 1 + Documentation/dontdiff | 1 + Makefile | 19 +++- scripts/Kbuild.include | 6 ++ scripts/Makefile.modbuiltin | 56 ++++++++++ scripts/modules_thick.c | 200 ++++++++++++++++++++++++++++++++++++ scripts/modules_thick.h | 48 +++++++++ 7 files changed, 330 insertions(+), 1 deletion(-) create mode 100644 scripts/Makefile.modbuiltin create mode 100644 scripts/modules_thick.c create mode 100644 scripts/modules_thick.h