Message ID | 20240716031045.1781332-4-kris.van.hees@oracle.com (mailing list archive) |
---|---|
State | Handled Elsewhere |
Headers | show |
Series | Generate address range data for built-in modules | expand |
Hmm, does this handle my concern from the last patch. That is, if the previous script is broken by some change, this will catch it? If so, should there be a way to run this always? As it looks to be only used for manual tests. On Mon, 15 Jul 2024 23:10:44 -0400 Kris Van Hees <kris.van.hees@oracle.com> wrote: > The modules.builtin.ranges offset range data for builtin modules is > generated at compile time based on the list of built-in modules and > the vmlinux.map and vmlinux.o.map linker maps. This data can be used ^^ As my daughter keeps reminding me, nobody uses double spaces after a period anymore ;-) > to determine whether a symbol at a particular address belongs to > module code that was configured to be compiled into the kernel proper > as a built-in module (rather than as a standalone module). > > This patch adds a script that uses the generated modules.builtin.ranges > data to annotate the symbols in the System.map with module names if > their address falls within a range that belongs to one or mre built-in "more" ? > modules. > > It then processes the vmlinux.map (and if needed, vmlinux.o.map) to > verify the annotation: > > - For each top-level section: > - For each object in the section: > - Determine whether the object is part of a built-in module > (using modules.builtin and the .*.cmd file used to compile > the object as suggested in [0]) > - For each symbol in that object, verify that the built-in > module association (or lack thereof) matches the annotation > given to the symbol. > > Signed-off-by: Kris Van Hees <kris.van.hees@oracle.com> > Reviewed-by: Nick Alcock <nick.alcock@oracle.com> > Reviewed-by: Alan Maguire <alan.maguire@oracle.com> After running this, I do get a lot of messages: uncore_pmu_event_start in intel_uncore (should NOT be) uncore_pcibus_to_dieid in intel_uncore (should NOT be) uncore_die_to_segment in intel_uncore (should NOT be) uncore_device_to_die in intel_uncore (should NOT be) __find_pci2phy_map in intel_uncore (should NOT be) uncore_event_show in intel_uncore (should NOT be) uncore_pmu_to_box in intel_uncore (should NOT be) uncore_msr_read_counter in intel_uncore (should NOT be) uncore_mmio_exit_box in intel_uncore (should NOT be) uncore_mmio_read_counter in intel_uncore (should NOT be) uncore_get_constraint in intel_uncore (should NOT be) uncore_put_constraint in intel_uncore (should NOT be) uncore_shared_reg_config in intel_uncore (should NOT be) uncore_perf_event_update in intel_uncore (should NOT be) uncore_pmu_event_read in intel_uncore (should NOT be) uncore_pmu_event_stop in intel_uncore (should NOT be) uncore_pmu_event_add in intel_uncore (should NOT be) [..] usb_debug_root in usb_common (should NOT be) usb_hcds_loaded in usbcore (should NOT be) iTCO_vendorsupport in iTCO_vendor_support (should NOT be) snd_ecards_limit in snd (should NOT be) snd_major in snd (should NOT be) snd_oss_root in snd (should NOT be) snd_seq_root in snd (should NOT be) ip6_min_hopcount in ipv6 (should NOT be) ip6_ra_chain in ipv6 (should NOT be) raw_v6_hashinfo in ipv6 (should NOT be) Verification of /work/build/nobackup/debiantesting-x86-64/modules.builtin.ranges: Correct matches: 24962 (75% of total) Module matches: 0 (0% of matches) Mismatches: 8262 (24% of total) Missing: 0 (0% of total) What does this mean? -- Steve > --- > > Notes: > Changes since v4: > - New patch in the series > > scripts/verify_builtin_ranges.awk | 348 ++++++++++++++++++++++++++++++ > 1 file changed, 348 insertions(+) > create mode 100755 scripts/verify_builtin_ranges.awk > > diff --git a/scripts/verify_builtin_ranges.awk b/scripts/verify_builtin_ranges.awk > new file mode 100755 > index 000000000000..a2475a38ba50 > --- /dev/null > +++ b/scripts/verify_builtin_ranges.awk > @@ -0,0 +1,348 @@ > +#!/usr/bin/gawk -f > +# SPDX-License-Identifier: GPL-2.0 > +# verify_builtin_ranges.awk: Verify address range data for builtin modules > +# Written by Kris Van Hees <kris.van.hees@oracle.com> > +# > +# Usage: verify_builtin_ranges.awk modules.builtin.ranges System.map \ > +# modules.builtin vmlinux.map vmlinux.o.map > +# > + > +# Return the module name(s) (if any) associated with the given object. > +# > +# If we have seen this object before, return information from the cache. > +# Otherwise, retrieve it from the corresponding .cmd file. > +#
On Wed, Aug 14, 2024 at 03:19:45PM -0400, Steven Rostedt wrote: > > Hmm, does this handle my concern from the last patch. That is, if the > previous script is broken by some change, this will catch it? > If so, should there be a way to run this always? As it looks to be only > used for manual tests. It is meant to address detecting things going wrong, yes. I hesitate to make this validation be something that is always executed because I wouldn't want to disrupt people's kernel builds with failure that are not critical to the operation of the kernel itself. I could make it a config option so it can nbe enabled for those who might want to, e.g. for release building? Does that make sense? > On Mon, 15 Jul 2024 23:10:44 -0400 > Kris Van Hees <kris.van.hees@oracle.com> wrote: > > > The modules.builtin.ranges offset range data for builtin modules is > > generated at compile time based on the list of built-in modules and > > the vmlinux.map and vmlinux.o.map linker maps. This data can be used > ^^ > As my daughter keeps reminding me, nobody uses double spaces after a period > anymore ;-) I am old-fashion :) > > to determine whether a symbol at a particular address belongs to > > module code that was configured to be compiled into the kernel proper > > as a built-in module (rather than as a standalone module). > > > > This patch adds a script that uses the generated modules.builtin.ranges > > data to annotate the symbols in the System.map with module names if > > their address falls within a range that belongs to one or mre built-in > "more" ? Oops, yes, thanks. > > modules. > > > > It then processes the vmlinux.map (and if needed, vmlinux.o.map) to > > verify the annotation: > > > > - For each top-level section: > > - For each object in the section: > > - Determine whether the object is part of a built-in module > > (using modules.builtin and the .*.cmd file used to compile > > the object as suggested in [0]) > > - For each symbol in that object, verify that the built-in > > module association (or lack thereof) matches the annotation > > given to the symbol. > > > > Signed-off-by: Kris Van Hees <kris.van.hees@oracle.com> > > Reviewed-by: Nick Alcock <nick.alcock@oracle.com> > > Reviewed-by: Alan Maguire <alan.maguire@oracle.com> > > After running this, I do get a lot of messages: > > uncore_pmu_event_start in intel_uncore (should NOT be) > uncore_pcibus_to_dieid in intel_uncore (should NOT be) > uncore_die_to_segment in intel_uncore (should NOT be) > uncore_device_to_die in intel_uncore (should NOT be) > __find_pci2phy_map in intel_uncore (should NOT be) > uncore_event_show in intel_uncore (should NOT be) > uncore_pmu_to_box in intel_uncore (should NOT be) > uncore_msr_read_counter in intel_uncore (should NOT be) > uncore_mmio_exit_box in intel_uncore (should NOT be) > uncore_mmio_read_counter in intel_uncore (should NOT be) > uncore_get_constraint in intel_uncore (should NOT be) > uncore_put_constraint in intel_uncore (should NOT be) > uncore_shared_reg_config in intel_uncore (should NOT be) > uncore_perf_event_update in intel_uncore (should NOT be) > uncore_pmu_event_read in intel_uncore (should NOT be) > uncore_pmu_event_stop in intel_uncore (should NOT be) > uncore_pmu_event_add in intel_uncore (should NOT be) > [..] > usb_debug_root in usb_common (should NOT be) > usb_hcds_loaded in usbcore (should NOT be) > iTCO_vendorsupport in iTCO_vendor_support (should NOT be) > snd_ecards_limit in snd (should NOT be) > snd_major in snd (should NOT be) > snd_oss_root in snd (should NOT be) > snd_seq_root in snd (should NOT be) > ip6_min_hopcount in ipv6 (should NOT be) > ip6_ra_chain in ipv6 (should NOT be) > raw_v6_hashinfo in ipv6 (should NOT be) > Verification of /work/build/nobackup/debiantesting-x86-64/modules.builtin.ranges: > Correct matches: 24962 (75% of total) > Module matches: 0 (0% of matches) > Mismatches: 8262 (24% of total) > Missing: 0 (0% of total) > > > What does this mean? Hm, this is certainly why the validation script exists. I am surprised, though not entirely because kernel changes toward the 6.10 branching and such came after I create this version. Would you be willing to send me a copy of your .config for this kernel build so I can investigate? This output is typical of a case where the script was not able to determine offse ranges correctly. Kris > > --- > > > > Notes: > > Changes since v4: > > - New patch in the series > > > > scripts/verify_builtin_ranges.awk | 348 ++++++++++++++++++++++++++++++ > > 1 file changed, 348 insertions(+) > > create mode 100755 scripts/verify_builtin_ranges.awk > > > > diff --git a/scripts/verify_builtin_ranges.awk b/scripts/verify_builtin_ranges.awk > > new file mode 100755 > > index 000000000000..a2475a38ba50 > > --- /dev/null > > +++ b/scripts/verify_builtin_ranges.awk > > @@ -0,0 +1,348 @@ > > +#!/usr/bin/gawk -f > > +# SPDX-License-Identifier: GPL-2.0 > > +# verify_builtin_ranges.awk: Verify address range data for builtin modules > > +# Written by Kris Van Hees <kris.van.hees@oracle.com> > > +# > > +# Usage: verify_builtin_ranges.awk modules.builtin.ranges System.map \ > > +# modules.builtin vmlinux.map vmlinux.o.map > > +# > > + > > +# Return the module name(s) (if any) associated with the given object. > > +# > > +# If we have seen this object before, return information from the cache. > > +# Otherwise, retrieve it from the corresponding .cmd file. > > +#
On Wed, 14 Aug 2024 15:59:58 -0400 Kris Van Hees <kris.van.hees@oracle.com> wrote: > > What does this mean? > > Hm, this is certainly why the validation script exists. I am surprised, though > not entirely because kernel changes toward the 6.10 branching and such came > after I create this version. Would you be willing to send me a copy of your > .config for this kernel build so I can investigate? This output is typical > of a case where the script was not able to determine offse ranges correctly. Attached. -- Steve
On Wed, Aug 14, 2024 at 04:16:06PM -0400, Steven Rostedt wrote: > On Wed, 14 Aug 2024 15:59:58 -0400 > Kris Van Hees <kris.van.hees@oracle.com> wrote: > > > > What does this mean? > > > > Hm, this is certainly why the validation script exists. I am surprised, though > > not entirely because kernel changes toward the 6.10 branching and such came > > after I create this version. Would you be willing to send me a copy of your > > .config for this kernel build so I can investigate? This output is typical > > of a case where the script was not able to determine offse ranges correctly. > > Attached. So, looking back at your output it seems that the problem is that I did not make it obvious that the verifier script is written to be executed from the root of the kernel build tree, i.e. where the objects are stored. I'll add support for an optional extra argument to the script so that a path to the actual object tree can be provided. That was an important oversight on my part - sorry about that. So, if your kernel is built into an object directory, the script in its current state would need to be executed with that object directory as current working directory. I.e. if the build directory is /work/build/nobackup/debiantesting-x86-64/ and the kernel source tree is in /work/source/linux, change CWD to that build directory and invoke the verifier as: /work/source/linux/scripts/verify_builtin_ranges.awk modules.builtin.ranges System.map modules.builtin vmlinux.map vmlinux.o.map Can you try that and verify that the output is correct in that case? I expect it will be. v6 of the series (which I hope to post tomorrow) will allow you to specify the path to the object tree so that this will be more user friendly. Kris
diff --git a/scripts/verify_builtin_ranges.awk b/scripts/verify_builtin_ranges.awk new file mode 100755 index 000000000000..a2475a38ba50 --- /dev/null +++ b/scripts/verify_builtin_ranges.awk @@ -0,0 +1,348 @@ +#!/usr/bin/gawk -f +# SPDX-License-Identifier: GPL-2.0 +# verify_builtin_ranges.awk: Verify address range data for builtin modules +# Written by Kris Van Hees <kris.van.hees@oracle.com> +# +# Usage: verify_builtin_ranges.awk modules.builtin.ranges System.map \ +# modules.builtin vmlinux.map vmlinux.o.map +# + +# Return the module name(s) (if any) associated with the given object. +# +# If we have seen this object before, return information from the cache. +# Otherwise, retrieve it from the corresponding .cmd file. +# +function get_module_info(fn, mod, obj, mfn, s) { + if (fn in omod) + return omod[fn]; + + if (match(fn, /\/[^/]+$/) == 0) + return ""; + + obj = fn; + mod = ""; + mfn = ""; + fn = substr(fn, 1, RSTART) "." substr(fn, RSTART + 1) ".cmd"; + if (getline s <fn == 1) { + if (match(s, /DKBUILD_MODFILE=['"]+[^'"]+/) > 0) { + mfn = substr(s, RSTART + 16, RLENGTH - 16); + gsub(/['"]/, "", mfn); + + mod = mfn; + gsub(/([^/ ]*\/)+/, "", mod); + gsub(/-/, "_", mod); + } + } + close(fn); + + # A single module (common case) also reflects objects that are not part + # of a module. Some of those objects have names that are also a module + # name (e.g. core). We check the associated module file name, and if + # they do not match, the object is not part of a module. + if (mod !~ / /) { + if (!(mod in mods)) + return ""; + if (mods[mod] != mfn) + return ""; + } + + # At this point, mod is a single (valid) module name, or a list of + # module names (that do not need validation). + omod[obj] = mod; + close(fn); + + return mod; +} + +# Return a representative integer value for a given hexadecimal address. +# +# Since all kernel addresses fall within the same memory region, we can safely +# strip off the first 6 hex digits before performing the hex-to-dec conversion, +# thereby avoiding integer overflows. +# +function addr2val(val) { + sub(/^0x/, "", val); + if (length(val) == 16) + val = substr(val, 5); + return strtonum("0x" val); +} + +# (1) Load the built-in module address range data. +# +ARGIND == 1 { + ranges[FNR] = $0; + rcnt++; + next; +} + +# (2) Annotate System.map symbols with module names. +# +ARGIND == 2 { + addr = addr2val($1); + name = $3; + + while (addr >= mod_eaddr) { + if (sect_symb) { + if (sect_symb != name) + next; + + sect_base = addr - sect_off; + if (dbg) + printf "[%s] BASE (%s) %016x - %016x = %016x\n", sect_name, sect_symb, addr, sect_off, sect_base >"/dev/stderr"; + sect_symb = 0; + } + + if (++ridx > rcnt) + break; + + $0 = ranges[ridx]; + sub(/-/, " "); + if ($4 != "=") { + sub(/-/, " "); + mod_saddr = strtonum("0x" $2) + sect_base; + mod_eaddr = strtonum("0x" $3) + sect_base; + $1 = $2 = $3 = ""; + sub(/^ +/, ""); + mod_name = $0; + + if (dbg) + printf "[%s] %s from %016x to %016x\n", sect_name, mod_name, mod_saddr, mod_eaddr >"/dev/stderr"; + } else { + sect_name = $1; + sect_off = strtonum("0x" $2); + sect_symb = $5; + } + } + + idx = addr"-"name; + if (addr >= mod_saddr && addr < mod_eaddr) + sym2mod[idx] = mod_name; + + next; +} + +# Once we are done annotating the System.map, we no longer need the ranges data. +# +FNR == 1 && ARGIND == 3 { + delete ranges; +} + +# (3) Build a lookup map of built-in module names. +# +# Lines from modules.builtin will be like: +# kernel/crypto/lzo-rle.ko +# and we derive the built-in module name from this as "lzo_rle" and associate +# it with object name "crypto/lzo-rle". +# +ARGIND == 3 { + sub(/kernel\//, ""); # strip off "kernel/" prefix + sub(/\.ko$/, ""); # strip off .ko suffix + + mod = $1; + sub(/([^/]*\/)+/, "", mod); # mod = basename($1) + gsub(/-/, "_", mod); # Convert - to _ + + mods[mod] = $1; + next; +} + +# (4) Get a list of symbols (per object). +# +# Symbols by object are read from vmlinux.map, with fallback to vmlinux.o.map +# if vmlinux is found to have inked in vmlinux.o. +# + +# If we were able to get the data we need from vmlinux.map, there is no need to +# process vmlinux.o.map. +# +FNR == 1 && ARGIND == 5 && total > 0 { + if (dbg) + printf "Note: %s is not needed.\n", FILENAME >"/dev/stderr"; + exit; +} + +# First determine whether we are dealing with a GNU ld or LLVM lld linker map. +# +ARGIND >= 4 && FNR == 1 && NF == 7 && $1 == "VMA" && $7 == "Symbol" { + map_is_lld = 1; + next; +} + +# (LLD) Convert a section record fronm lld format to ld format. +# +ARGIND >= 4 && map_is_lld && NF == 5 && /[0-9] [^ ]/ { + $0 = $5 " 0x"$1 " 0x"$3 " load address 0x"$2; +} + +# (LLD) Convert an object record from lld format to ld format. +# +ARGIND >= 4 && map_is_lld && NF == 5 && $5 ~ /:\(\./ { + gsub(/\)/, ""); + sub(/:\(/, " "); + sub(/ vmlinux\.a\(/, " "); + $0 = " "$6 " 0x"$1 " 0x"$3 " " $5; +} + +# (LLD) Convert a symbol record from lld format to ld format. +# +ARGIND >= 4 && map_is_lld && NF == 5 && $5 ~ /^[A-Za-z_][A-Za-z0-9_]*$/ { + $0 = " 0x" $1 " " $5; +} + +# (LLD) We do not need any other ldd linker map records. +# +ARGIND >= 4 && map_is_lld && /^[0-9a-f]{16} / { + next; +} + +# Handle section records with long section names (spilling onto a 2nd line). +# +ARGIND >= 4 && !map_is_lld && NF == 1 && /^[^ ]/ { + s = $0; + getline; + $0 = s " " $0; +} + +# Next section - previous one is done. +# +ARGIND >= 4 && /^[^ ]/ { + sect = 0; +} + +# Get the (top level) section name. +# +ARGIND >= 4 && /^[^ ]/ && $2 ~ /^0x/ && $3 ~ /^0x/ { + # Empty section or per-CPU section - ignore. + if (NF < 3 || $1 ~ /\.percpu/) { + sect = 0; + next; + } + + sect = $1; + + next; +} + +# If we are not currently in a section we care about, ignore records. +# +!sect { + next; +} + +# Handle object records with long section names (spilling onto a 2nd line). +# +ARGIND >= 4 && /^ [^ \*]/ && NF == 1 { + # If the section name is long, the remainder of the entry is found on + # the next line. + s = $0; + getline; + $0 = s " " $0; +} + +# If the object is vmlinux.o, we need to consult vmlinux.o.map for per-object +# symbol information +# +ARGIND == 4 && /^ [^ ]/ && NF == 4 { + idx = sect":"$1; + if (!(idx in sect_addend)) { + sect_addend[idx] = addr2val($2); + if (dbg) + printf "ADDEND %s = %016x\n", idx, sect_addend[idx] >"/dev/stderr"; + } + if ($4 == "vmlinux.o") { + need_o_map = 1; + next; + } +} + +# If data from vmlinux.o.map is needed, we only process section and object +# records from vmlinux.map to determine which section we need to pay attention +# to in vmlinux.o.map. So skip everything else from vmlinux.map. +# +ARGIND == 4 && need_o_map { + next; +} + +# Get module information for the current object. +# +ARGIND >= 4 && /^ [^ ]/ && NF == 4 { + msect = $1; + mod_name = get_module_info($4); + mod_eaddr = addr2val($2) + addr2val($3); + + next; +} + +# Process a symbol record. +# +# Evaluate the module information obtained from vmlinux.map (or vmlinux.o.map) +# as follows: +# - For all symbols in a given object: +# - If the symbol is annotated with the same module name(s) that the object +# belongs to, count it as a match. +# - Otherwise: +# - If the symbol is known to have duplicates of which at least one is +# in a built-in module, disregard it. +# - If the symbol us not annotated with any module name(s) AND the +# object belongs to built-in modules, count it as missing. +# - Otherwise, count it as a mismatch. +# +ARGIND >= 4 && /^ / && NF == 2 && $1 ~ /^0x/ { + idx = sect":"msect; + if (!(idx in sect_addend)) + next; + + addr = addr2val($1); + + # Handle the rare but annoying case where a 0-size symbol is placed at + # the byte *after* the module range. Based on vmlinux.map it will be + # considered part of the current object, but it falls just beyond the + # module address range. Unfortunately, its address could be at the + # start of another built-in module, so the only safe thing to do is to + # ignore it. + if (mod_name && addr == mod_eaddr) + next; + + # If we are processing vmlinux.o.map, we need to apply the base address + # of the section to the relative address on the record. + # + if (ARGIND == 5) + addr += sect_addend[idx]; + + idx = addr"-"$2; + mod = ""; + if (idx in sym2mod) { + mod = sym2mod[idx]; + if (sym2mod[idx] == mod_name) { + mod_matches++; + matches++; + } else if (mod_name == "") { + print $2 " in " sym2mod[idx] " (should NOT be)"; + mismatches++; + } else { + print $2 " in " sym2mod[idx] " (should be " mod_name ")"; + mismatches++; + } + } else if (mod_name != "") { + print $2 " should be in " mod_name; + missing++; + } else + matches++; + + total++; + + next; +} + +# Issue the comparison report. +# +END { + if (total == 0) + total = 1; + + printf "Verification of %s:\n", ARGV[1]; + printf " Correct matches: %6d (%d%% of total)\n", matches, 100 * matches / total; + printf " Module matches: %6d (%d%% of matches)\n", mod_matches, 100 * mod_matches / matches; + printf " Mismatches: %6d (%d%% of total)\n", mismatches, 100 * mismatches / total; + printf " Missing: %6d (%d%% of total)\n", missing, 100 * missing / total; +}