@@ -165,7 +165,9 @@ isert_create_qp(struct isert_conn *isert_conn,
* outgoing control PDU responses.
*/
attr.cap.max_send_sge = max(2, device->dev_attr.max_sge - 2);
- isert_conn->max_sge = attr.cap.max_send_sge;
+ isert_conn->max_write_sge = attr.cap.max_send_sge;
+ isert_conn->max_read_sge = min_t(u32, device->dev_attr.max_sge_rd,
+ attr.cap.max_send_sge);
attr.cap.max_recv_sge = 1;
attr.sq_sig_type = IB_SIGNAL_REQ_WR;
@@ -2392,7 +2394,7 @@ isert_put_text_rsp(struct iscsi_cmd *cmd, struct iscsi_conn *conn)
static int
isert_build_rdma_wr(struct isert_conn *isert_conn, struct isert_cmd *isert_cmd,
struct ib_sge *ib_sge, struct ib_send_wr *send_wr,
- u32 data_left, u32 offset)
+ u32 data_left, u32 offset, u32 max_sge)
{
struct iscsi_cmd *cmd = isert_cmd->iscsi_cmd;
struct scatterlist *sg_start, *tmp_sg;
@@ -2403,7 +2405,7 @@ isert_build_rdma_wr(struct isert_conn *isert_conn, struct isert_cmd *isert_cmd,
sg_off = offset / PAGE_SIZE;
sg_start = &cmd->se_cmd.t_data_sg[sg_off];
- sg_nents = min(cmd->se_cmd.t_data_nents - sg_off, isert_conn->max_sge);
+ sg_nents = min(cmd->se_cmd.t_data_nents - sg_off, max_sge);
page_off = offset % PAGE_SIZE;
send_wr->sg_list = ib_sge;
@@ -2449,8 +2451,9 @@ isert_map_rdma(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
struct isert_data_buf *data = &wr->data;
struct ib_send_wr *send_wr;
struct ib_sge *ib_sge;
- u32 offset, data_len, data_left, rdma_write_max, va_offset = 0;
+ u32 offset, data_len, data_left, rdma_max_len, va_offset = 0;
int ret = 0, i, ib_sge_cnt;
+ u32 max_sge;
isert_cmd->tx_desc.isert_cmd = isert_cmd;
@@ -2472,7 +2475,12 @@ isert_map_rdma(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
}
wr->ib_sge = ib_sge;
- wr->send_wr_num = DIV_ROUND_UP(data->nents, isert_conn->max_sge);
+ if (wr->iser_ib_op == ISER_IB_RDMA_WRITE)
+ max_sge = isert_conn->max_write_sge;
+ else
+ max_sge = isert_conn->max_read_sge;
+
+ wr->send_wr_num = DIV_ROUND_UP(data->nents, max_sge);
wr->send_wr = kzalloc(sizeof(struct ib_send_wr) * wr->send_wr_num,
GFP_KERNEL);
if (!wr->send_wr) {
@@ -2482,11 +2490,11 @@ isert_map_rdma(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
}
wr->isert_cmd = isert_cmd;
- rdma_write_max = isert_conn->max_sge * PAGE_SIZE;
+ rdma_max_len = max_sge * PAGE_SIZE;
for (i = 0; i < wr->send_wr_num; i++) {
send_wr = &isert_cmd->rdma_wr.send_wr[i];
- data_len = min(data_left, rdma_write_max);
+ data_len = min(data_left, rdma_max_len);
send_wr->send_flags = 0;
if (wr->iser_ib_op == ISER_IB_RDMA_WRITE) {
@@ -2508,7 +2516,7 @@ isert_map_rdma(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
}
ib_sge_cnt = isert_build_rdma_wr(isert_conn, isert_cmd, ib_sge,
- send_wr, data_len, offset);
+ send_wr, data_len, offset, max_sge);
ib_sge += ib_sge_cnt;
offset += data_len;
@@ -152,7 +152,8 @@ struct isert_conn {
u32 responder_resources;
u32 initiator_depth;
bool pi_support;
- u32 max_sge;
+ u32 max_write_sge;
+ u32 max_read_sge;
char *login_buf;
char *login_req_buf;
char *login_rsp_buf;
Use the device's max_sge_rd capability to compute the target's read sge depth. Save both the read and write max_sge values in the isert_conn struct, and use these when creating RDMA_WRITE/READ work requests. Signed-off-by: Steve Wise <swise@opengridcomputing.com> --- drivers/infiniband/ulp/isert/ib_isert.c | 24 ++++++++++++++++-------- drivers/infiniband/ulp/isert/ib_isert.h | 3 ++- 2 files changed, 18 insertions(+), 9 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-nfs" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html