| Message ID | 20241007-dcd-type2-upstream-v4-17-c261ee6eeded@intel.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Delegated to: | Ira Weiny |
| Headers | show |
| Series | DCD: Add support for Dynamic Capacity Devices (DCD) | expand |
On Mon, 07 Oct 2024 18:16:23 -0500 Ira Weiny <ira.weiny@intel.com> wrote: > Dynamic Capacity Devices (DCD) require event interrupts to process > memory addition or removal. BIOS may have control over non-DCD event > processing. DCD interrupt configuration needs to be separate from > memory event interrupt configuration. > > Split cxl_event_config_msgnums() from irq setup in preparation for > separate DCD interrupts configuration. > > Signed-off-by: Ira Weiny <ira.weiny@intel.com> Trivial comment inline Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > --- > drivers/cxl/pci.c | 24 ++++++++++++------------ > 1 file changed, 12 insertions(+), 12 deletions(-) > > diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c > index fc5ab74448cc..29a863331bec 100644 > --- a/drivers/cxl/pci.c > +++ b/drivers/cxl/pci.c > @@ -702,35 +702,31 @@ static int cxl_event_config_msgnums(struct cxl_memdev_state *mds, > return cxl_event_get_int_policy(mds, policy); > } > > -static int cxl_event_irqsetup(struct cxl_memdev_state *mds) > +static int cxl_event_irqsetup(struct cxl_memdev_state *mds, > + struct cxl_event_interrupt_policy *policy) > { > struct cxl_dev_state *cxlds = &mds->cxlds; > - struct cxl_event_interrupt_policy policy; > int rc; > > - rc = cxl_event_config_msgnums(mds, &policy); > - if (rc) > - return rc; > - > - rc = cxl_event_req_irq(cxlds, policy.info_settings); > + rc = cxl_event_req_irq(cxlds, policy->info_settings); > if (rc) { > dev_err(cxlds->dev, "Failed to get interrupt for event Info log\n"); > return rc; At somepoint maybe dev_err_probe() is appropriate in here. > } > > - rc = cxl_event_req_irq(cxlds, policy.warn_settings); > + rc = cxl_event_req_irq(cxlds, policy->warn_settings); > if (rc) { > dev_err(cxlds->dev, "Failed to get interrupt for event Warn log\n"); > return rc; > } > > - rc = cxl_event_req_irq(cxlds, policy.failure_settings); > + rc = cxl_event_req_irq(cxlds, policy->failure_settings); > if (rc) { > dev_err(cxlds->dev, "Failed to get interrupt for event Failure log\n"); > return rc; > } > > - rc = cxl_event_req_irq(cxlds, policy.fatal_settings); > + rc = cxl_event_req_irq(cxlds, policy->fatal_settings); > if (rc) { > dev_err(cxlds->dev, "Failed to get interrupt for event Fatal log\n"); > return rc; > @@ -749,7 +745,7 @@ static bool cxl_event_int_is_fw(u8 setting) > static int cxl_event_config(struct pci_host_bridge *host_bridge, > struct cxl_memdev_state *mds, bool irq_avail) > { > - struct cxl_event_interrupt_policy policy; > + struct cxl_event_interrupt_policy policy = { 0 }; > int rc; > > /* > @@ -777,11 +773,15 @@ static int cxl_event_config(struct pci_host_bridge *host_bridge, > return -EBUSY; > } > > + rc = cxl_event_config_msgnums(mds, &policy); > + if (rc) > + return rc; > + > rc = cxl_mem_alloc_event_buf(mds); > if (rc) > return rc; > > - rc = cxl_event_irqsetup(mds); > + rc = cxl_event_irqsetup(mds, &policy); > if (rc) > return rc; > >
On Mon, Oct 07, 2024 at 06:16:23PM -0500, Ira Weiny wrote: > Dynamic Capacity Devices (DCD) require event interrupts to process > memory addition or removal. BIOS may have control over non-DCD event > processing. DCD interrupt configuration needs to be separate from > memory event interrupt configuration. > > Split cxl_event_config_msgnums() from irq setup in preparation for > separate DCD interrupts configuration. > > Signed-off-by: Ira Weiny <ira.weiny@intel.com> > --- One minor comment inline; otherwise Reviewed-by: Fan Ni <fan.ni@samsung.com> > drivers/cxl/pci.c | 24 ++++++++++++------------ > 1 file changed, 12 insertions(+), 12 deletions(-) > > diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c > index fc5ab74448cc..29a863331bec 100644 > --- a/drivers/cxl/pci.c > +++ b/drivers/cxl/pci.c > @@ -702,35 +702,31 @@ static int cxl_event_config_msgnums(struct cxl_memdev_state *mds, > return cxl_event_get_int_policy(mds, policy); > } > > -static int cxl_event_irqsetup(struct cxl_memdev_state *mds) > +static int cxl_event_irqsetup(struct cxl_memdev_state *mds, > + struct cxl_event_interrupt_policy *policy) > { > struct cxl_dev_state *cxlds = &mds->cxlds; > - struct cxl_event_interrupt_policy policy; > int rc; > > - rc = cxl_event_config_msgnums(mds, &policy); > - if (rc) > - return rc; > - > - rc = cxl_event_req_irq(cxlds, policy.info_settings); > + rc = cxl_event_req_irq(cxlds, policy->info_settings); > if (rc) { > dev_err(cxlds->dev, "Failed to get interrupt for event Info log\n"); > return rc; > } > > - rc = cxl_event_req_irq(cxlds, policy.warn_settings); > + rc = cxl_event_req_irq(cxlds, policy->warn_settings); > if (rc) { > dev_err(cxlds->dev, "Failed to get interrupt for event Warn log\n"); > return rc; > } > > - rc = cxl_event_req_irq(cxlds, policy.failure_settings); > + rc = cxl_event_req_irq(cxlds, policy->failure_settings); > if (rc) { > dev_err(cxlds->dev, "Failed to get interrupt for event Failure log\n"); > return rc; > } > > - rc = cxl_event_req_irq(cxlds, policy.fatal_settings); > + rc = cxl_event_req_irq(cxlds, policy->fatal_settings); > if (rc) { > dev_err(cxlds->dev, "Failed to get interrupt for event Fatal log\n"); > return rc; There is a lot of duplicate code here, can we simplify it by iteratting all setttings in cxl_event_interrrupt_policy like for setting in policy: rc = cxl_event_req_irq(cxlds, setting); if (rc) { ... } For DCD, handle the setup separately afterwards. Fan > @@ -749,7 +745,7 @@ static bool cxl_event_int_is_fw(u8 setting) > static int cxl_event_config(struct pci_host_bridge *host_bridge, > struct cxl_memdev_state *mds, bool irq_avail) > { > - struct cxl_event_interrupt_policy policy; > + struct cxl_event_interrupt_policy policy = { 0 }; > int rc; > > /* > @@ -777,11 +773,15 @@ static int cxl_event_config(struct pci_host_bridge *host_bridge, > return -EBUSY; > } > > + rc = cxl_event_config_msgnums(mds, &policy); > + if (rc) > + return rc; > + > rc = cxl_mem_alloc_event_buf(mds); > if (rc) > return rc; > > - rc = cxl_event_irqsetup(mds); > + rc = cxl_event_irqsetup(mds, &policy); > if (rc) > return rc; > > > -- > 2.46.0 >
Fan Ni wrote: > On Mon, Oct 07, 2024 at 06:16:23PM -0500, Ira Weiny wrote: > > Dynamic Capacity Devices (DCD) require event interrupts to process > > memory addition or removal. BIOS may have control over non-DCD event > > processing. DCD interrupt configuration needs to be separate from > > memory event interrupt configuration. > > > > Split cxl_event_config_msgnums() from irq setup in preparation for > > separate DCD interrupts configuration. > > > > Signed-off-by: Ira Weiny <ira.weiny@intel.com> > > --- > One minor comment inline; otherwise > > Reviewed-by: Fan Ni <fan.ni@samsung.com> > [snip] > > > > - rc = cxl_event_req_irq(cxlds, policy.fatal_settings); > > + rc = cxl_event_req_irq(cxlds, policy->fatal_settings); > > if (rc) { > > dev_err(cxlds->dev, "Failed to get interrupt for event Fatal log\n"); > > return rc; > > There is a lot of duplicate code here, can we simplify it by > iteratting all setttings in cxl_event_interrrupt_policy like > > for setting in policy: > rc = cxl_event_req_irq(cxlds, setting); > if (rc) { > ... > } > Do you mean by treating struct cxl_event_interrupt_policy as an u8 array? I'm not sure that is super beneficial. Ira > > For DCD, handle the setup separately afterwards. > > Fan [snip]
diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c index fc5ab74448cc..29a863331bec 100644 --- a/drivers/cxl/pci.c +++ b/drivers/cxl/pci.c @@ -702,35 +702,31 @@ static int cxl_event_config_msgnums(struct cxl_memdev_state *mds, return cxl_event_get_int_policy(mds, policy); } -static int cxl_event_irqsetup(struct cxl_memdev_state *mds) +static int cxl_event_irqsetup(struct cxl_memdev_state *mds, + struct cxl_event_interrupt_policy *policy) { struct cxl_dev_state *cxlds = &mds->cxlds; - struct cxl_event_interrupt_policy policy; int rc; - rc = cxl_event_config_msgnums(mds, &policy); - if (rc) - return rc; - - rc = cxl_event_req_irq(cxlds, policy.info_settings); + rc = cxl_event_req_irq(cxlds, policy->info_settings); if (rc) { dev_err(cxlds->dev, "Failed to get interrupt for event Info log\n"); return rc; } - rc = cxl_event_req_irq(cxlds, policy.warn_settings); + rc = cxl_event_req_irq(cxlds, policy->warn_settings); if (rc) { dev_err(cxlds->dev, "Failed to get interrupt for event Warn log\n"); return rc; } - rc = cxl_event_req_irq(cxlds, policy.failure_settings); + rc = cxl_event_req_irq(cxlds, policy->failure_settings); if (rc) { dev_err(cxlds->dev, "Failed to get interrupt for event Failure log\n"); return rc; } - rc = cxl_event_req_irq(cxlds, policy.fatal_settings); + rc = cxl_event_req_irq(cxlds, policy->fatal_settings); if (rc) { dev_err(cxlds->dev, "Failed to get interrupt for event Fatal log\n"); return rc; @@ -749,7 +745,7 @@ static bool cxl_event_int_is_fw(u8 setting) static int cxl_event_config(struct pci_host_bridge *host_bridge, struct cxl_memdev_state *mds, bool irq_avail) { - struct cxl_event_interrupt_policy policy; + struct cxl_event_interrupt_policy policy = { 0 }; int rc; /* @@ -777,11 +773,15 @@ static int cxl_event_config(struct pci_host_bridge *host_bridge, return -EBUSY; } + rc = cxl_event_config_msgnums(mds, &policy); + if (rc) + return rc; + rc = cxl_mem_alloc_event_buf(mds); if (rc) return rc; - rc = cxl_event_irqsetup(mds); + rc = cxl_event_irqsetup(mds, &policy); if (rc) return rc;
Dynamic Capacity Devices (DCD) require event interrupts to process memory addition or removal. BIOS may have control over non-DCD event processing. DCD interrupt configuration needs to be separate from memory event interrupt configuration. Split cxl_event_config_msgnums() from irq setup in preparation for separate DCD interrupts configuration. Signed-off-by: Ira Weiny <ira.weiny@intel.com> --- drivers/cxl/pci.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)