new file mode 100644
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+
+cxl-set-partition-info(1)
+=========================
+
+NAME
+----
+cxl-set-partition-info - set the partitioning between volatile and persistent capacity on a CXL memdev
+
+SYNOPSIS
+--------
+[verse]
+'cxl set-partition-info <mem> [ [<mem1>..<memN>] [<options>]'
+
+include::partition-description.txt[]
+Partition the device on the next device reset using the volatile capacity
+requested. Using this command to change the size of the persistent capacity
+shall result in the loss of stored data.
+
+OPTIONS
+-------
+include::partition-options.txt[]
+
+SEE ALSO
+--------
+linkcxl:cxl-list[1],
+CXL-2.0 8.2.9.5.2
new file mode 100644
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+
+DESCRIPTION
+-----------
+Partition the device into volatile and persistent capacity. The change
+in partitioning will become the “next” configuration, to become active
+on the next device reset.
+
+Use "cxl list -m <memdev> -I" to examine the partitioning capabilities
+of a device. A partition_alignment_bytes value of zero means there are
+no partitionable bytes available and therefore the partitions cannot be
+changed.
+
+Using this command to change the size of the persistent capacity shall
+result in the loss of data stored.
new file mode 100644
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+
+<memory device(s)>::
+include::memdev-option.txt[]
+
+-s::
+--size=::
+ Size in bytes of the volatile partition requested.
+
+ Size must align to the devices partition_alignment_bytes.
+ Use 'cxl list -m <memdev> -I' to find partition_alignment_bytes.
+
+ Size must be less than or equal to the device's partitionable bytes.
+ Calculate partitionable bytes by subracting the volatile_only_bytes,
+ and the persistent_only_bytes, from the total_bytes.
+ Use 'cxl list -m <memdev> -I' to find the above mentioned_byte values.
+
+-v::
+ Turn on verbose debug messages in the library (if libcxl was built with
+ logging and debug enabled).
@@ -10,4 +10,5 @@ int cmd_read_labels(int argc, const char **argv, struct cxl_ctx *ctx);
int cmd_zero_labels(int argc, const char **argv, struct cxl_ctx *ctx);
int cmd_init_labels(int argc, const char **argv, struct cxl_ctx *ctx);
int cmd_check_labels(int argc, const char **argv, struct cxl_ctx *ctx);
+int cmd_set_partition_info(int argc, const char **argv, struct cxl_ctx *ctx);
#endif /* _CXL_BUILTIN_H_ */
@@ -64,6 +64,7 @@ static struct cmd_struct commands[] = {
{ "zero-labels", .c_fn = cmd_zero_labels },
{ "read-labels", .c_fn = cmd_read_labels },
{ "write-labels", .c_fn = cmd_write_labels },
+ { "set-partition-info", .c_fn = cmd_set_partition_info },
};
int main(int argc, const char **argv)
@@ -6,6 +6,7 @@
#include <unistd.h>
#include <limits.h>
#include <util/log.h>
+#include <util/size.h>
#include <cxl/libcxl.h>
#include <util/parse-options.h>
#include <ccan/minmax/minmax.h>
@@ -24,6 +25,7 @@ static struct parameters {
unsigned len;
unsigned offset;
bool verbose;
+ const char *volatile_size;
} param;
#define fail(fmt, ...) \
@@ -48,6 +50,10 @@ OPT_UINTEGER('s', "size", ¶m.len, "number of label bytes to operate"), \
OPT_UINTEGER('O', "offset", ¶m.offset, \
"offset into the label area to start operation")
+#define SET_PARTITION_OPTIONS() \
+OPT_STRING('s', "volatile_size", ¶m.volatile_size, "volatile-size", \
+ "next volatile partition size in bytes")
+
static const struct option read_options[] = {
BASE_OPTIONS(),
LABEL_OPTIONS(),
@@ -68,6 +74,12 @@ static const struct option zero_options[] = {
OPT_END(),
};
+static const struct option set_partition_options[] = {
+ BASE_OPTIONS(),
+ SET_PARTITION_OPTIONS(),
+ OPT_END(),
+};
+
static int action_zero(struct cxl_memdev *memdev, struct action_context *actx)
{
size_t size;
@@ -175,6 +187,80 @@ out:
return rc;
}
+static int validate_partition(struct cxl_memdev *memdev,
+ unsigned long long volatile_request)
+{
+ unsigned long long total_cap, volatile_only, persistent_only;
+ unsigned long long partitionable_bytes, partition_align_bytes;
+ const char *devname = cxl_memdev_get_devname(memdev);
+ struct cxl_cmd *cmd;
+ int rc;
+
+ cmd = cxl_cmd_new_identify(memdev);
+ if (!cmd)
+ return -ENXIO;
+ rc = cxl_cmd_submit(cmd);
+ if (rc < 0)
+ goto err;
+ rc = cxl_cmd_get_mbox_status(cmd);
+ if (rc != 0)
+ goto err;
+
+ partition_align_bytes = cxl_cmd_identify_get_partition_align_bytes(cmd);
+ if (partition_align_bytes == 0) {
+ fprintf(stderr, "%s: no partitionable capacity\n", devname);
+ rc = -EINVAL;
+ goto err;
+ }
+
+ total_cap = cxl_cmd_identify_get_total_bytes(cmd);
+ volatile_only = cxl_cmd_identify_get_volatile_only_bytes(cmd);
+ persistent_only = cxl_cmd_identify_get_persistent_only_bytes(cmd);
+
+ partitionable_bytes = total_cap - volatile_only - persistent_only;
+
+ if (volatile_request > partitionable_bytes) {
+ fprintf(stderr, "%s: volatile size %lld exceeds partitionable capacity %lld\n",
+ devname, volatile_request, partitionable_bytes);
+ rc = -EINVAL;
+ goto err;
+ }
+ if (!IS_ALIGNED(volatile_request, partition_align_bytes)) {
+ fprintf(stderr, "%s: volatile size %lld is not partition aligned %lld\n",
+ devname, volatile_request, partition_align_bytes);
+ rc = -EINVAL;
+ }
+err:
+ cxl_cmd_unref(cmd);
+ return rc;
+}
+
+static int action_set_partition(struct cxl_memdev *memdev,
+ struct action_context *actx)
+{
+ const char *devname = cxl_memdev_get_devname(memdev);
+ unsigned long long volatile_request;
+ int rc;
+
+ volatile_request = parse_size64(param.volatile_size);
+ if (volatile_request == ULLONG_MAX) {
+ fprintf(stderr, "%s: failed to parse volatile size '%s'\n",
+ devname, param.volatile_size);
+ return -EINVAL;
+ }
+
+ rc = validate_partition(memdev, volatile_request);
+ if (rc)
+ return rc;
+
+ rc = cxl_memdev_set_partition_info(memdev, volatile_request,
+ !cxl_cmd_partition_info_flag_immediate());
+ if (rc)
+ fprintf(stderr, "%s error: %s\n", devname, strerror(-rc));
+
+ return rc;
+}
+
static int memdev_action(int argc, const char **argv, struct cxl_ctx *ctx,
int (*action)(struct cxl_memdev *memdev, struct action_context *actx),
const struct option *options, const char *usage)
@@ -235,6 +321,11 @@ static int memdev_action(int argc, const char **argv, struct cxl_ctx *ctx,
}
}
+ if (action == action_set_partition && !param.volatile_size) {
+ usage_with_options(u, options);
+ return -EINVAL;
+ }
+
if (param.verbose)
cxl_set_log_priority(ctx, LOG_DEBUG);
@@ -323,3 +414,13 @@ int cmd_zero_labels(int argc, const char **argv, struct cxl_ctx *ctx)
count > 1 ? "s" : "");
return count >= 0 ? 0 : EXIT_FAILURE;
}
+
+int cmd_set_partition_info(int argc, const char **argv, struct cxl_ctx *ctx)
+{
+ int count = memdev_action(argc, argv, ctx, action_set_partition,
+ set_partition_options,
+ "cxl set-partition-info <mem0> [<mem1>..<memN>] [<options>]");
+ fprintf(stderr, "set_partition %d mem%s\n", count >= 0 ? count : 0,
+ count > 1 ? "s" : "");
+ return count >= 0 ? 0 : EXIT_FAILURE;
+}