mbox series

[0/3] regulator: twl6030: Fix the VMMC reset behavior

Message ID 20190725094542.16547-1-gregory.clement@bootlin.com (mailing list archive)
Headers show
Series regulator: twl6030: Fix the VMMC reset behavior | expand

Message

Gregory CLEMENT July 25, 2019, 9:45 a.m. UTC 
Hello,

With the TWL6030 PMIC, during reset the VMMC regulator doesn't reach
0V and only drops to 1.8V, furthermore the pulse width is under 200us
whereas the SD specification expect 1ms.

Fortunately, the WR_S bit allows the TWL6030 to no reset at all the
VMMC during warm reset and keep the current voltage. Thanks to this
workaround the SD card doesn't reach a undefined reset stage.

The first patch describes the new property needed for this "feature".

The second one is just a small cleanup done while I wrote the last
patch, but as it was not really related to the feature itself, I made
a separate patch for it.

The last patch adds the feature in the driver.

Gregory

Gregory CLEMENT (3):
  dt-bindings: regulator: twl6030: Add retain-on-reset property
  regulator: twl6030: use variable for device node
  regulator: twl6030: workaround the VMMC reset behavior

 .../bindings/regulator/twl-regulator.txt      |  7 +++++++
 drivers/regulator/twl6030-regulator.c         | 21 +++++++++++++++----
 2 files changed, 24 insertions(+), 4 deletions(-)