| Message ID | 20210126124004.52550-1-tony@atomide.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Update dra7 devicetree files to probe with genpd | expand |
On 26/01/21 6:09 pm, Tony Lindgren wrote: > Hi all, > > Here's v2 series to update dra7 to probe with ti-sysc and genpd like we've > already done for am3 and 4. > > These patches are against v5.11-rc1, and depend on the following commits > in my fixes branch: > > 7078a5ba7a58 ("soc: ti: omap-prm: Fix boot time errors for rst_map_012 bits 0 and 1") > 2a39af3870e9 ("ARM: OMAP2+: Fix booting for am335x after moving to simple-pm-bus") > > These patches also depend on the series: > > [PATCH 0/3] Few ti-sysc changes for v5.12 merge window > > Please review and test, I've also pushed out a temporary testing branch to > make testing easier to [0][1]. Looks good to me and didn't observe any issues in my testing. Tested-by: Kishon Vijay Abraham I <kishon@ti.com> > > Regards, > > Tony > > Changes since v1: > > - Split the series into two parts, looks like most of the emails did not > make it to the lists > > - Dropped Balaji from Cc as the email address bounces > > [0] git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git tmp-testing-genpd-dra7 > [1] https://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git/log/?h=omap-for-v5.12/tmp-testing-genpd-dra7 > > Tony Lindgren (15): > PCI: pci-dra7xx: Prepare for deferred probe with > module_platform_driver > ARM: dts: Update pcie ranges for dra7 > ARM: dts: Configure interconnect target module for dra7 pcie > ARM: dts: Properly configure dra7 edma sysconfig registers > ARM: dts: Move dra7 l3 noc to a separate node > ARM: dts: Configure interconnect target module for dra7 qspi > ARM: dts: Configure interconnect target module for dra7 sata > ARM: dts: Configure interconnect target module for dra7 mpu > ARM: dts: Configure interconnect target module for dra7 dmm > ARM: dts: Configure simple-pm-bus for dra7 l4_wkup > ARM: dts: Configure simple-pm-bus for dra7 l4_per1 > ARM: dts: Configure simple-pm-bus for dra7 l4_per2 > ARM: dts: Configure simple-pm-bus for dra7 l4_per3 > ARM: dts: Configure simple-pm-bus for dra7 l4_cfg > ARM: dts: Configure simple-pm-bus for dra7 l3 > > arch/arm/boot/dts/dra7-l4.dtsi | 76 ++++++--- > arch/arm/boot/dts/dra7.dtsi | 216 ++++++++++++++++-------- > drivers/pci/controller/dwc/pci-dra7xx.c | 13 +- > 3 files changed, 213 insertions(+), 92 deletions(-) >
Hi all, Here's v2 series to update dra7 to probe with ti-sysc and genpd like we've already done for am3 and 4. These patches are against v5.11-rc1, and depend on the following commits in my fixes branch: 7078a5ba7a58 ("soc: ti: omap-prm: Fix boot time errors for rst_map_012 bits 0 and 1") 2a39af3870e9 ("ARM: OMAP2+: Fix booting for am335x after moving to simple-pm-bus") These patches also depend on the series: [PATCH 0/3] Few ti-sysc changes for v5.12 merge window Please review and test, I've also pushed out a temporary testing branch to make testing easier to [0][1]. Regards, Tony Changes since v1: - Split the series into two parts, looks like most of the emails did not make it to the lists - Dropped Balaji from Cc as the email address bounces [0] git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git tmp-testing-genpd-dra7 [1] https://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git/log/?h=omap-for-v5.12/tmp-testing-genpd-dra7 Tony Lindgren (15): PCI: pci-dra7xx: Prepare for deferred probe with module_platform_driver ARM: dts: Update pcie ranges for dra7 ARM: dts: Configure interconnect target module for dra7 pcie ARM: dts: Properly configure dra7 edma sysconfig registers ARM: dts: Move dra7 l3 noc to a separate node ARM: dts: Configure interconnect target module for dra7 qspi ARM: dts: Configure interconnect target module for dra7 sata ARM: dts: Configure interconnect target module for dra7 mpu ARM: dts: Configure interconnect target module for dra7 dmm ARM: dts: Configure simple-pm-bus for dra7 l4_wkup ARM: dts: Configure simple-pm-bus for dra7 l4_per1 ARM: dts: Configure simple-pm-bus for dra7 l4_per2 ARM: dts: Configure simple-pm-bus for dra7 l4_per3 ARM: dts: Configure simple-pm-bus for dra7 l4_cfg ARM: dts: Configure simple-pm-bus for dra7 l3 arch/arm/boot/dts/dra7-l4.dtsi | 76 ++++++--- arch/arm/boot/dts/dra7.dtsi | 216 ++++++++++++++++-------- drivers/pci/controller/dwc/pci-dra7xx.c | 13 +- 3 files changed, 213 insertions(+), 92 deletions(-)