[v4,0/5] clk: ti: add am33xx spread spectrum clock support

Message

Dario Binacchi April 1, 2021, 7:37 p.m. UTC

As reported by the TI spruh73x/spruhl7x RM, MPU and LCD modules support
spread spectrum clocking (SSC) on their output clocks. SSC is used to
spread the spectral peaking of the clock to reduce any electromagnetic
interference (EMI) that may be caused due to the clock’s fundamental
or any of its harmonics.
The series allows you to enable and adjust the spread spectrum clocking
for all am33xx/am43xx PLLs for which it is supported. All these issues
have been fixed.

Previous versions of the series did not supported SSC for am43xx SOCs,
causing clock registration failure for DPLLs. Furthermore, for am33xx
SOCs, clock registration failed for DPLLs for which SSC is not supported.

Changes in v4:
- Add Stephen Boyd review tag.
- Add Rob Herring review tag.
- Add SSC registers for CORE, DDR and PER PLLs.
- Update commit message.
- Update commit message.

Changes in v3:
- Add '-hz' suffix to "ti,ssc-modfreq" binding.
- Add Tony Lindgren acked tag.
- Use "ti,ssc-modfreq-hz" binding instead of "ti,ssc-modfreq".

Changes in v2:
- Remove SSC registers from dpll_core_ck@490 node (SSC is not supported)
- Add SSC registers to dpll_mpu_ck@488 node.
- Move the DT changes to the previous patch in the series.

Dario Binacchi (5):
  clk: ti: fix typo in routine description
  dt-bindings: ti: dpll: add spread spectrum support
  ARM: dts: am33xx-clocks: add spread spectrum support
  ARM: dts: am43xx-clocks: add spread spectrum support
  clk: ti: add am33xx/am43xx spread spectrum clock support

 .../devicetree/bindings/clock/ti/dpll.txt     | 20 +++++
 arch/arm/boot/dts/am33xx-clocks.dtsi          | 10 +--
 arch/arm/boot/dts/am43xx-clocks.dtsi          | 12 +--
 drivers/clk/ti/dpll.c                         | 42 +++++++++
 drivers/clk/ti/dpll3xxx.c                     | 87 ++++++++++++++++++-
 include/linux/clk/ti.h                        | 24 +++++
 6 files changed, 183 insertions(+), 12 deletions(-)