[v3,0/3] AM57x EVM Device Tree Overlays

Message

Andrew Davis Jan. 23, 2023, 7:48 p.m. UTC

Hello all,

These is an uncontroversial (hopefully) DT Overlay to support the
TI AM57x EVM. More complex cases are staged and ready to follow but
wanted to test the water with this one.

For some reason dtbs_check does not get run on overlays, this
will need further investigation to fix in kbuild. For now I ran
it through manually but am not 100% sure it actually checked it,
so double checks here very welcome.

Thanks,
Andrew

Changes from v2:
 - Rebased on v6.2-rc5

Changes from v1:
 - Made touchscreen node name generic
 - Used proper interrupt flags

Andrew Davis (3):
  ARM: dts: ti: Add AM57xx GP EVM board support
  ARM: dts: ti: Add AM57xx GP EVM Rev A3 board support
  ARM: dts: am57xx-idk: Add IDK displays and touchscreens

 arch/arm/boot/dts/Makefile                    |   8 ++
 arch/arm/boot/dts/am571x-idk-touchscreen.dtso |  32 +++++
 arch/arm/boot/dts/am572x-idk-touchscreen.dtso |  32 +++++
 arch/arm/boot/dts/am57xx-evm.dtso             | 127 ++++++++++++++++++
 .../boot/dts/am57xx-idk-lcd-osd101t2045.dtso  |  63 +++++++++
 .../boot/dts/am57xx-idk-lcd-osd101t2587.dtso  |  66 +++++++++
 6 files changed, 328 insertions(+)
 create mode 100644 arch/arm/boot/dts/am571x-idk-touchscreen.dtso
 create mode 100644 arch/arm/boot/dts/am572x-idk-touchscreen.dtso
 create mode 100644 arch/arm/boot/dts/am57xx-evm.dtso
 create mode 100644 arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso
 create mode 100644 arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso