@@ -1,7 +1,9 @@
-* Texas Instruments SoC audio setups with TLV320AIC3X Codec
+* TI SoC audio using McASP to connect to TLV320AIC3X or HDMI endcoder
Required properties:
-- compatible : "ti,da830-evm-audio" : forDM365/DA8xx/OMAPL1x/AM33xx
+- compatible: should contain one of:
+ * "ti,da830-evm-audio" for DM365/DA8xx/OMAPL1x/AM33xx with TLV320AIC3X
+ * "ti,beaglebone-black-audio" for Beaglebone-black HDMI audio
- ti,model : The user-visible name of this sound complex.
- ti,audio-codec : The phandle of the TLV320AIC3x audio codec
- ti,mcasp-controller : The phandle of the McASP controller
@@ -21,6 +21,7 @@
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
+#include <sound/pcm_params.h>
#include <asm/dma.h>
#include <asm/mach-types.h>
@@ -83,12 +84,46 @@ static int evm_hw_params(struct snd_pcm_substream *substream,
return 0;
}
+/* If changing sample format the tda998x configuration (REG_CTS_N) needs
+ to be changed. */
+#define TDA998X_SAMPLE_FORMAT SNDRV_PCM_FORMAT_S32_LE
+static int evm_tda998x_startup(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_mask *fmt = constrs_mask(&runtime->hw_constraints,
+ SNDRV_PCM_HW_PARAM_FORMAT);
+ snd_mask_none(fmt);
+ snd_mask_set(fmt, TDA998X_SAMPLE_FORMAT);
+
+ return evm_startup(substream);
+}
+
+static int evm_tda998x_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+ struct snd_soc_card *soc_card = rtd->card;
+ struct snd_soc_card_drvdata_davinci *drvdata =
+ snd_soc_card_get_drvdata(soc_card);
+
+ return snd_soc_dai_set_sysclk(cpu_dai, 0, drvdata->sysclk,
+ SND_SOC_CLOCK_IN);
+}
+
static struct snd_soc_ops evm_ops = {
.startup = evm_startup,
.shutdown = evm_shutdown,
.hw_params = evm_hw_params,
};
+
+static struct snd_soc_ops evm_tda998x_ops = {
+ .startup = evm_tda998x_startup,
+ .shutdown = evm_shutdown,
+ .hw_params = evm_tda998x_hw_params,
+};
+
/* davinci-evm machine dapm widgets */
static const struct snd_soc_dapm_widget aic3x_dapm_widgets[] = {
SND_SOC_DAPM_HP("Headphone Jack", NULL),
@@ -149,6 +184,35 @@ static int evm_aic3x_init(struct snd_soc_pcm_runtime *rtd)
return 0;
}
+static const struct snd_soc_dapm_widget tda998x_dapm_widgets[] = {
+ SND_SOC_DAPM_OUTPUT("HDMI Out"),
+};
+
+static int evm_tda998x_init(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+ struct snd_soc_dapm_context *dapm = &rtd->codec->dapm;
+ struct snd_soc_card *soc_card = rtd->card;
+ int ret;
+
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, 0, 1);
+ if (ret < 0)
+ return ret;
+
+ snd_soc_dapm_new_controls(dapm, tda998x_dapm_widgets,
+ ARRAY_SIZE(tda998x_dapm_widgets));
+
+ ret = snd_soc_of_parse_audio_routing(soc_card, "ti,audio-routing");
+
+ /* not connected */
+ snd_soc_dapm_disable_pin(dapm, "RX");
+
+ /* always connected */
+ snd_soc_dapm_enable_pin(dapm, "HDMI Out");
+
+ return 0;
+}
+
/* davinci-evm digital audio interface glue - connects codec <--> CPU */
static struct snd_soc_dai_link dm6446_evm_dai = {
.name = "TLV320AIC3X",
@@ -334,7 +398,7 @@ static struct snd_soc_card da850_snd_soc_card = {
#if defined(CONFIG_OF)
/*
- * The struct is used as place holder. It will be completely
+ * The structs are used as place holders. They will be completely
* filled with data from dt node.
*/
static struct snd_soc_dai_link evm_dai_tlv320aic3x = {
@@ -347,10 +411,24 @@ static struct snd_soc_dai_link evm_dai_tlv320aic3x = {
SND_SOC_DAIFMT_IB_NF,
};
+static struct snd_soc_dai_link evm_dai_tda998x_hdmi = {
+ .name = "NXP TDA998x HDMI Chip",
+ .stream_name = "HDMI",
+ .codec_dai_name = "hdmi-hifi",
+ .ops = &evm_tda998x_ops,
+ .init = evm_tda998x_init,
+ .dai_fmt = (SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_IB_NF),
+};
+
static const struct of_device_id davinci_evm_dt_ids[] = {
{
.compatible = "ti,da830-evm-audio",
- .data = (void *) &evm_dai_tlv320aic3x,
+ .data = &evm_dai_tlv320aic3x,
+ },
+ {
+ .compatible = "ti,beaglebone-black-audio",
+ .data = &evm_dai_tda998x_hdmi,
},
{ /* sentinel */ }
};
Add machine driver support for BeagleBone-Black HDMI audio. BBB has NXP TDA998X HDMI transmitter connected to McASP port in I2S mode. The 44100 Hz sample-rate and it's multiples can not be accurately produced on BBB. The only supported sample format is SNDRV_PCM_FORMAT_S32_LE. The 8 least significant bits are ignored. Signed-off-by: Jyri Sarha <jsarha@ti.com> --- .../bindings/sound/davinci-evm-audio.txt | 6 +- sound/soc/davinci/davinci-evm.c | 82 +++++++++++++++++++- 2 files changed, 84 insertions(+), 4 deletions(-)