@@ -31,7 +31,6 @@
#include "ehci-omap.h"
-
#ifdef CONFIG_OMAP_EHCI_PHY_MODE
/* EHCI connected to External PHY */
@@ -80,7 +79,6 @@ struct ehci_omap_clock_defs {
#define USBHOST_TLL_FCLK "usbtll_fck"
/*-------------------------------------------------------------------------*/
-
#ifndef CONFIG_OMAP_EHCI_PHY_MODE
static void omap_usb_utmi_init(struct usb_hcd *hcd, u8 tll_channel_mask)
@@ -89,17 +87,17 @@ static void omap_usb_utmi_init(struct usb_hcd *hcd, u8 tll_channel_mask)
/* Use UTMI Ports of TLL */
omap_writel((1 << OMAP_UHH_HOSTCONFIG_ULPI_BYPASS_SHIFT)|
- (1<<OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN_SHIFT)|
- (1<<OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN_SHIFT)|
- (1<<OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN_SHIFT)|
- (0<<OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN_SHIFT),
+ (1 << OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN_SHIFT)|
+ (1 << OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN_SHIFT)|
+ (1 << OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN_SHIFT)|
+ (0 << OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN_SHIFT),
OMAP_UHH_HOSTCONFIG);
/* Enusre bit is set */
while (!(omap_readl(OMAP_UHH_HOSTCONFIG)
& (1 << OMAP_UHH_HOSTCONFIG_ULPI_BYPASS_SHIFT)))
cpu_relax();
- dev_dbg(hcd->self.controller, "\nEntered UTMI MODE: success\n");
+ dev_dbg(hcd->self.controller, "Entered UTMI MODE: success\n");
/* Program the 3 TLL channels upfront */
@@ -107,15 +105,15 @@ static void omap_usb_utmi_init(struct usb_hcd *hcd, u8 tll_channel_mask)
/* Disable AutoIdle */
omap_writel(omap_readl(OMAP_TLL_CHANNEL_CONF(i)) &
- ~(1<<OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE_SHIFT),
+ ~(1 << OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE_SHIFT),
OMAP_TLL_CHANNEL_CONF(i));
/* Disable BitStuffing */
omap_writel(omap_readl(OMAP_TLL_CHANNEL_CONF(i)) &
- ~(1<<OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF_SHIFT),
+ ~(1 << OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF_SHIFT),
OMAP_TLL_CHANNEL_CONF(i));
/* SDR Mode */
omap_writel(omap_readl(OMAP_TLL_CHANNEL_CONF(i)) &
- ~(1<<OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE_SHIFT),
+ ~(1 << OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE_SHIFT),
OMAP_TLL_CHANNEL_CONF(i));
}
@@ -135,11 +133,11 @@ static void omap_usb_utmi_init(struct usb_hcd *hcd, u8 tll_channel_mask)
continue;
omap_writel(omap_readl(OMAP_TLL_CHANNEL_CONF(i)) |
- (1<<OMAP_TLL_CHANNEL_CONF_CHANEN_SHIFT),
+ (1 << OMAP_TLL_CHANNEL_CONF_CHANEN_SHIFT),
OMAP_TLL_CHANNEL_CONF(i));
omap_writeb(0xBE, OMAP_TLL_ULPI_SCRATCH_REGISTER(i));
- dev_dbg(hcd->self.controller, "\nULPI_SCRATCH_REG[ch=%d]"
+ dev_dbg(hcd->self.controller, "ULPI_SCRATCH_REG[ch=%d]"
"= 0x%02x\n",
i+1, omap_readb(OMAP_TLL_ULPI_SCRATCH_REGISTER(i)));
}
@@ -209,7 +207,6 @@ static int omap_start_ehc(struct platform_device *dev, struct usb_hcd *hcd)
return PTR_ERR(ehci_clocks->usbhost_ick_clk);
clk_enable(ehci_clocks->usbhost_ick_clk);
-
ehci_clocks->usbhost2_120m_fck_clk = clk_get(&dev->dev,
USBHOST_120M_FCLK);
if (IS_ERR(ehci_clocks->usbhost2_120m_fck_clk))
@@ -281,10 +278,10 @@ static int omap_start_ehc(struct platform_device *dev, struct usb_hcd *hcd)
#ifdef CONFIG_OMAP_EHCI_PHY_MODE
/* Bypass the TLL module for PHY mode operation */
omap_writel((0 << OMAP_UHH_HOSTCONFIG_ULPI_BYPASS_SHIFT)|
- (1<<OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN_SHIFT)|
- (1<<OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN_SHIFT)|
- (1<<OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN_SHIFT)|
- (0<<OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN_SHIFT),
+ (1 << OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN_SHIFT)|
+ (1 << OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN_SHIFT)|
+ (1 << OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN_SHIFT)|
+ (0 << OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN_SHIFT),
OMAP_UHH_HOSTCONFIG);
/* Ensure that BYPASS is set */
while (omap_readl(OMAP_UHH_HOSTCONFIG)
@@ -325,7 +322,7 @@ static int omap_start_ehc(struct platform_device *dev, struct usb_hcd *hcd)
EHCI_INSNREG05_ULPI);
while (!(omap_readl(EHCI_INSNREG05_ULPI)
- & (1<<EHCI_INSNREG05_ULPI_CONTROL_SHIFT)))
+ & (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT)))
cpu_relax();
#endif
@@ -345,19 +342,19 @@ static void omap_stop_ehc(struct platform_device *dev, struct usb_hcd *hcd)
dev_dbg(hcd->self.controller, "stopping TI EHCI USB Controller\n");
/* Reset OMAP modules for insmod/rmmod to work */
- omap_writel((1<<1), OMAP_UHH_SYSCONFIG);
- while (!(omap_readl(OMAP_UHH_SYSSTATUS) & (1<<0)))
+ omap_writel((1 << 1), OMAP_UHH_SYSCONFIG);
+ while (!(omap_readl(OMAP_UHH_SYSSTATUS) & (1 << 0)))
cpu_relax();
- while (!(omap_readl(OMAP_UHH_SYSSTATUS) & (1<<1)))
+ while (!(omap_readl(OMAP_UHH_SYSSTATUS) & (1 << 1)))
cpu_relax();
- while (!(omap_readl(OMAP_UHH_SYSSTATUS) & (1<<2)))
+ while (!(omap_readl(OMAP_UHH_SYSSTATUS) & (1 << 2)))
cpu_relax();
dev_dbg(hcd->self.controller,
"UHH RESET DONE OMAP_UHH_SYSSTATUS %x !!\n",
omap_readl(OMAP_UHH_SYSSTATUS));
- omap_writel((1<<1), OMAP_USBTLL_SYSCONFIG);
- while (!(omap_readl(OMAP_USBTLL_SYSSTATUS) & (1<<0)))
+ omap_writel((1 << 1), OMAP_USBTLL_SYSCONFIG);
+ while (!(omap_readl(OMAP_USBTLL_SYSSTATUS) & (1 << 0)))
cpu_relax();
dev_dbg(hcd->self.controller, "TLL RESET DONE\n");
@@ -391,7 +388,6 @@ static void omap_stop_ehc(struct platform_device *dev, struct usb_hcd *hcd)
ehci_clocks->usbtll_ick_clk = NULL;
}
-
#ifdef EXTERNAL_PHY_RESET
gpio_free(EXT_PHY_RESET_GPIO_PORT1);
gpio_free(EXT_PHY_RESET_GPIO_PORT2);
@@ -461,7 +457,7 @@ static int ehci_hcd_omap_drv_probe(struct platform_device *dev)
ehci->hcs_params = readl(&ehci->caps->hcs_params);
/* SET 1 micro-frame Interrupt interval */
- writel(readl(&ehci->regs->command) | (1<<16), &ehci->regs->command);
+ writel(readl(&ehci->regs->command) | (1 << 16), &ehci->regs->command);
retval = usb_add_hcd(hcd, dev->resource[1].start,
IRQF_DISABLED | IRQF_SHARED);
@@ -562,8 +558,8 @@ static const struct hc_driver ehci_omap_hc_driver = {
#endif
};
-/*-------------------------------------------------------------------------*/
MODULE_ALIAS("platform:omap-ehci");
+
static struct platform_driver ehci_hcd_omap_driver = {
.probe = ehci_hcd_omap_drv_probe,
.remove = ehci_hcd_omap_drv_remove,
Trivial cleanup patch, no functional changes. Just adding a few spaces here and there. Signed-off-by: Felipe Balbi <me@felipebalbi.com> --- drivers/usb/host/ehci-omap.c | 50 +++++++++++++++++++---------------------- 1 files changed, 23 insertions(+), 27 deletions(-)