@@ -29,7 +29,105 @@
#include <linux/clk.h>
#include <linux/gpio.h>
-#include "ehci-omap.h"
+/* FIXME remove platform-specific code */
+#include <mach/hardware.h>
+#include "../../../arch/arm/mach-omap2/cm.h"
+#include "../../../arch/arm/mach-omap2/cm-regbits-34xx.h"
+
+/*
+ * OMAP USBHOST Register addresses: PHYSICAL ADDRESSES
+ * Use omap_readl()/omap_writel() functions
+ */
+
+/* USBHOST: TLL, UUH, OHCI, EHCI */
+#define OMAP_USBHOST_BASE (L4_34XX_BASE + 0x60000)
+
+/* TLL Register Set */
+#define OMAP_USBHOST_TLL_BASE (OMAP_USBHOST_BASE + 0x2000)
+#define OMAP_USBTLL_REVISION (OMAP_USBHOST_TLL_BASE + 0x00)
+#define OMAP_USBTLL_SYSCONFIG (OMAP_USBHOST_TLL_BASE + 0x10)
+ #define OMAP_USBTLL_SYSCONFIG_CACTIVITY_SHIFT 8
+ #define OMAP_USBTLL_SYSCONFIG_SIDLEMODE_SHIFT 3
+ #define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP_SHIFT 2
+ #define OMAP_USBTLL_SYSCONFIG_SOFTRESET_SHIFT 1
+ #define OMAP_USBTLL_SYSCONFIG_AUTOIDLE_SHIFT 0
+#define OMAP_USBTLL_SYSSTATUS (OMAP_USBHOST_TLL_BASE + 0x14)
+ #define OMAP_USBTLL_SYSSTATUS_RESETDONE_SHIFT 0
+#define OMAP_USBTLL_IRQSTATUS (OMAP_USBHOST_TLL_BASE + 0x18)
+#define OMAP_USBTLL_IRQENABLE (OMAP_USBHOST_TLL_BASE + 0x1C)
+
+#define OMAP_TLL_SHARED_CONF (OMAP_USBHOST_TLL_BASE + 0x30)
+ #define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN_SHFT 6
+ #define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN_SHIFT 5
+ #define OMAP_TLL_SHARED_CONF_USB_DIVRATION_SHIFT 2
+ #define OMAP_TLL_SHARED_CONF_FCLK_REQ_SHIFT 1
+ #define OMAP_TLL_SHARED_CONF_FCLK_IS_ON_SHIFT 0
+
+#define OMAP_TLL_CHANNEL_CONF(num)\
+ (OMAP_USBHOST_TLL_BASE + (0x040 + 0x004 * num))
+ #define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF_SHIFT 11
+ #define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE_SHIFT 10
+ #define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE_SHIFT 9
+ #define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE_SHIFT 8
+ #define OMAP_TLL_CHANNEL_CONF_CHANEN_SHIFT 0
+
+#define OMAP_TLL_ULPI_FUNCTION_CTRL(num)\
+ (OMAP_USBHOST_TLL_BASE + (0x804 + 0x100 * num))
+#define OMAP_TLL_ULPI_INTERFACE_CTRL(num)\
+ (OMAP_USBHOST_TLL_BASE + (0x807 + 0x100 * num))
+#define OMAP_TLL_ULPI_OTG_CTRL(num)\
+ (OMAP_USBHOST_TLL_BASE + (0x80A + 0x100 * num))
+#define OMAP_TLL_ULPI_INT_EN_RISE(num)\
+ (OMAP_USBHOST_TLL_BASE + (0x80D + 0x100 * num))
+#define OMAP_TLL_ULPI_INT_EN_FALL(num)\
+ (OMAP_USBHOST_TLL_BASE + (0x810 + 0x100 * num))
+#define OMAP_TLL_ULPI_INT_STATUS(num)\
+ (OMAP_USBHOST_TLL_BASE + (0x813 + 0x100 * num))
+#define OMAP_TLL_ULPI_INT_LATCH(num)\
+ (OMAP_USBHOST_TLL_BASE + (0x814 + 0x100 * num))
+#define OMAP_TLL_ULPI_DEBUG(num)\
+ (OMAP_USBHOST_TLL_BASE + (0x815 + 0x100 * num))
+#define OMAP_TLL_ULPI_SCRATCH_REGISTER(num)\
+ (OMAP_USBHOST_TLL_BASE + (0x816 + 0x100 * num))
+
+#define OMAP_TLL_CHANNEL_COUNT 3
+ #define OMAP_TLL_CHANNEL_1_EN_MASK 1
+ #define OMAP_TLL_CHANNEL_2_EN_MASK 2
+ #define OMAP_TLL_CHANNEL_3_EN_MASK 4
+
+/* UHH Register Set */
+#define OMAP_USBHOST_UHH_BASE (OMAP_USBHOST_BASE + 0x4000)
+#define OMAP_UHH_REVISION (OMAP_USBHOST_UHH_BASE + 0x00)
+#define OMAP_UHH_SYSCONFIG (OMAP_USBHOST_UHH_BASE + 0x10)
+ #define OMAP_UHH_SYSCONFIG_MIDLEMODE_SHIFT 12
+ #define OMAP_UHH_SYSCONFIG_CACTIVITY_SHIFT 8
+ #define OMAP_UHH_SYSCONFIG_SIDLEMODE_SHIFT 3
+ #define OMAP_UHH_SYSCONFIG_ENAWAKEUP_SHIFT 2
+ #define OMAP_UHH_SYSCONFIG_SOFTRESET_SHIFT 1
+ #define OMAP_UHH_SYSCONFIG_AUTOIDLE_SHIFT 0
+
+#define OMAP_UHH_SYSSTATUS (OMAP_USBHOST_UHH_BASE + 0x14)
+#define OMAP_UHH_HOSTCONFIG (OMAP_USBHOST_UHH_BASE + 0x40)
+ #define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS_SHIFT 0
+ #define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN_SHIFT 2
+ #define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN_SHIFT 3
+ #define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN_SHIFT 4
+ #define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN_SHIFT 5
+
+#define OMAP_UHH_DEBUG_CSR (OMAP_USBHOST_UHH_BASE + 0x44)
+
+/* EHCI Register Set */
+#define OMAP_USBHOST_EHCI_BASE (OMAP_USBHOST_BASE + 0x4800)
+#define EHCI_INSNREG05_ULPI (OMAP_USBHOST_EHCI_BASE + 0xA4)
+ #define EHCI_INSNREG05_ULPI_CONTROL_SHIFT 31
+ #define EHCI_INSNREG05_ULPI_PORTSEL_SHIFT 24
+ #define EHCI_INSNREG05_ULPI_OPSEL_SHIFT 22
+ #define EHCI_INSNREG05_ULPI_REGADD_SHIFT 16
+ #define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8
+ #define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0
+
+/* OHCI Register Set */
+#define OMAP_USBHOST_OHCI_BASE (OMAP_USBHOST_BASE + 0x4400)
#ifdef CONFIG_OMAP_EHCI_PHY_MODE
/* EHCI connected to External PHY */
deleted file mode 100644
@@ -1,125 +0,0 @@
-/*
- * ehci-omap.h - register definitions for USBHOST in OMAP 34xx
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Author: Vikram Pandita <vikram.pandita@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __EHCI_OMAP_H
-#define __EHCI_OMAP_H
-
-#include <mach/hardware.h>
-#include "../../../arch/arm/mach-omap2/cm.h"
-#include "../../../arch/arm/mach-omap2/cm-regbits-34xx.h"
-
-/*
- * OMAP USBHOST Register addresses: PHYSICAL ADDRESSES
- * Use omap_readl()/omap_writel() functions
- */
-
-/* USBHOST: TLL, UUH, OHCI, EHCI */
-#define OMAP_USBHOST_BASE (L4_34XX_BASE + 0x60000)
-
-/* TLL Register Set */
-#define OMAP_USBHOST_TLL_BASE (OMAP_USBHOST_BASE + 0x2000)
-#define OMAP_USBTLL_REVISION (OMAP_USBHOST_TLL_BASE + 0x00)
-#define OMAP_USBTLL_SYSCONFIG (OMAP_USBHOST_TLL_BASE + 0x10)
- #define OMAP_USBTLL_SYSCONFIG_CACTIVITY_SHIFT 8
- #define OMAP_USBTLL_SYSCONFIG_SIDLEMODE_SHIFT 3
- #define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP_SHIFT 2
- #define OMAP_USBTLL_SYSCONFIG_SOFTRESET_SHIFT 1
- #define OMAP_USBTLL_SYSCONFIG_AUTOIDLE_SHIFT 0
-#define OMAP_USBTLL_SYSSTATUS (OMAP_USBHOST_TLL_BASE + 0x14)
- #define OMAP_USBTLL_SYSSTATUS_RESETDONE_SHIFT 0
-#define OMAP_USBTLL_IRQSTATUS (OMAP_USBHOST_TLL_BASE + 0x18)
-#define OMAP_USBTLL_IRQENABLE (OMAP_USBHOST_TLL_BASE + 0x1C)
-
-#define OMAP_TLL_SHARED_CONF (OMAP_USBHOST_TLL_BASE + 0x30)
- #define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN_SHFT 6
- #define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN_SHIFT 5
- #define OMAP_TLL_SHARED_CONF_USB_DIVRATION_SHIFT 2
- #define OMAP_TLL_SHARED_CONF_FCLK_REQ_SHIFT 1
- #define OMAP_TLL_SHARED_CONF_FCLK_IS_ON_SHIFT 0
-
-#define OMAP_TLL_CHANNEL_CONF(num)\
- (OMAP_USBHOST_TLL_BASE + (0x040 + 0x004 * num))
- #define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF_SHIFT 11
- #define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE_SHIFT 10
- #define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE_SHIFT 9
- #define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE_SHIFT 8
- #define OMAP_TLL_CHANNEL_CONF_CHANEN_SHIFT 0
-
-#define OMAP_TLL_ULPI_FUNCTION_CTRL(num)\
- (OMAP_USBHOST_TLL_BASE + (0x804 + 0x100 * num))
-#define OMAP_TLL_ULPI_INTERFACE_CTRL(num)\
- (OMAP_USBHOST_TLL_BASE + (0x807 + 0x100 * num))
-#define OMAP_TLL_ULPI_OTG_CTRL(num)\
- (OMAP_USBHOST_TLL_BASE + (0x80A + 0x100 * num))
-#define OMAP_TLL_ULPI_INT_EN_RISE(num)\
- (OMAP_USBHOST_TLL_BASE + (0x80D + 0x100 * num))
-#define OMAP_TLL_ULPI_INT_EN_FALL(num)\
- (OMAP_USBHOST_TLL_BASE + (0x810 + 0x100 * num))
-#define OMAP_TLL_ULPI_INT_STATUS(num)\
- (OMAP_USBHOST_TLL_BASE + (0x813 + 0x100 * num))
-#define OMAP_TLL_ULPI_INT_LATCH(num)\
- (OMAP_USBHOST_TLL_BASE + (0x814 + 0x100 * num))
-#define OMAP_TLL_ULPI_DEBUG(num)\
- (OMAP_USBHOST_TLL_BASE + (0x815 + 0x100 * num))
-#define OMAP_TLL_ULPI_SCRATCH_REGISTER(num)\
- (OMAP_USBHOST_TLL_BASE + (0x816 + 0x100 * num))
-
-#define OMAP_TLL_CHANNEL_COUNT 3
- #define OMAP_TLL_CHANNEL_1_EN_MASK 1
- #define OMAP_TLL_CHANNEL_2_EN_MASK 2
- #define OMAP_TLL_CHANNEL_3_EN_MASK 4
-
-/* UHH Register Set */
-#define OMAP_USBHOST_UHH_BASE (OMAP_USBHOST_BASE + 0x4000)
-#define OMAP_UHH_REVISION (OMAP_USBHOST_UHH_BASE + 0x00)
-#define OMAP_UHH_SYSCONFIG (OMAP_USBHOST_UHH_BASE + 0x10)
- #define OMAP_UHH_SYSCONFIG_MIDLEMODE_SHIFT 12
- #define OMAP_UHH_SYSCONFIG_CACTIVITY_SHIFT 8
- #define OMAP_UHH_SYSCONFIG_SIDLEMODE_SHIFT 3
- #define OMAP_UHH_SYSCONFIG_ENAWAKEUP_SHIFT 2
- #define OMAP_UHH_SYSCONFIG_SOFTRESET_SHIFT 1
- #define OMAP_UHH_SYSCONFIG_AUTOIDLE_SHIFT 0
-
-#define OMAP_UHH_SYSSTATUS (OMAP_USBHOST_UHH_BASE + 0x14)
-#define OMAP_UHH_HOSTCONFIG (OMAP_USBHOST_UHH_BASE + 0x40)
- #define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS_SHIFT 0
- #define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN_SHIFT 2
- #define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN_SHIFT 3
- #define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN_SHIFT 4
- #define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN_SHIFT 5
-
-#define OMAP_UHH_DEBUG_CSR (OMAP_USBHOST_UHH_BASE + 0x44)
-
-/* EHCI Register Set */
-#define OMAP_USBHOST_EHCI_BASE (OMAP_USBHOST_BASE + 0x4800)
-#define EHCI_INSNREG05_ULPI (OMAP_USBHOST_EHCI_BASE + 0xA4)
- #define EHCI_INSNREG05_ULPI_CONTROL_SHIFT 31
- #define EHCI_INSNREG05_ULPI_PORTSEL_SHIFT 24
- #define EHCI_INSNREG05_ULPI_OPSEL_SHIFT 22
- #define EHCI_INSNREG05_ULPI_REGADD_SHIFT 16
- #define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8
- #define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0
-
-/* OHCI Register Set */
-#define OMAP_USBHOST_OHCI_BASE (OMAP_USBHOST_BASE + 0x4400)
-
-#endif/* __EHCI_OMAP_H*/
That header is only used by ehci-omap.c for register definitions and indirectly include some other headers. Signed-off-by: Felipe Balbi <me@felipebalbi.com> --- drivers/usb/host/ehci-omap.c | 100 +++++++++++++++++++++++++++++++++- drivers/usb/host/ehci-omap.h | 125 ------------------------------------------ 2 files changed, 99 insertions(+), 126 deletions(-) delete mode 100644 drivers/usb/host/ehci-omap.h