diff mbox

[2/5] OMAP1/2/3/4: Adapt board files for cleand DEBUG_LL interface

Message ID 1250878147-10551-1-git-send-email-vikram.pandita@ti.com (mailing list archive)
State Changes Requested, archived
Delegated to: Tony Lindgren
Headers show

Commit Message

vikram pandita Aug. 21, 2009, 6:09 p.m. UTC 
This patch assigns the physical address of debug uart as defined
in menucoinfig item CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR to phys_io

The virtual address for io_pg_offset is calculated as per static
mapping

CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR is a hex value and for boards
like Zoom2, the phy address can be zero, in case debug board
is not attached.

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
---
 arch/arm/mach-omap2/board-2430sdp.c      |    4 ++--
 arch/arm/mach-omap2/board-3430sdp.c      |    4 ++--
 arch/arm/mach-omap2/board-4430sdp.c      |    4 ++--
 arch/arm/mach-omap2/board-apollon.c      |    4 ++--
 arch/arm/mach-omap2/board-generic.c      |    4 ++--
 arch/arm/mach-omap2/board-h4.c           |    4 ++--
 arch/arm/mach-omap2/board-ldp.c          |    4 ++--
 arch/arm/mach-omap2/board-n8x0.c         |   12 ++++++------
 arch/arm/mach-omap2/board-omap3beagle.c  |    4 ++--
 arch/arm/mach-omap2/board-omap3evm.c     |    4 ++--
 arch/arm/mach-omap2/board-omap3pandora.c |    4 ++--
 arch/arm/mach-omap2/board-overo.c        |    4 ++--
 arch/arm/mach-omap2/board-rx51.c         |    4 ++--
 arch/arm/mach-omap2/board-zoom2.c        |    4 ++--
 14 files changed, 32 insertions(+), 32 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index c693668..9ed2f2c 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -225,8 +225,8 @@  static void __init omap_2430sdp_map_io(void)
 
 MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.phys_io        = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR,
+	.io_pg_offst    = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_2430sdp_map_io,
 	.init_irq	= omap_2430sdp_init_irq,
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index c71417f..f085eee 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -505,8 +505,8 @@  static void __init omap_3430sdp_map_io(void)
 
 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.phys_io	= CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR,
+	.io_pg_offst	= ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_3430sdp_map_io,
 	.init_irq	= omap_3430sdp_init_irq,
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 646079f..4c1a166 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -83,8 +83,8 @@  static void __init omap_4430sdp_map_io(void)
 
 MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 	/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.phys_io        = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR,
+	.io_pg_offst    = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_4430sdp_map_io,
 	.init_irq	= omap_4430sdp_init_irq,
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index e2947fd..61da659 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -336,8 +336,8 @@  static void __init omap_apollon_map_io(void)
 
 MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
 	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.phys_io        = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR,
+	.io_pg_offst    = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_apollon_map_io,
 	.init_irq	= omap_apollon_init_irq,
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index fc9eccb..6d39eaa 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -59,8 +59,8 @@  static void __init omap_generic_map_io(void)
 
 MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
 	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.phys_io        = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR,
+	.io_pg_offst    = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR - OMAP1_IO_OFFSET) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_generic_map_io,
 	.init_irq	= omap_generic_init_irq,
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 7eda321..4ce760f 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -379,8 +379,8 @@  static void __init omap_h4_map_io(void)
 
 MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
 	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.phys_io        = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR,
+	.io_pg_offst    = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_h4_map_io,
 	.init_irq	= omap_h4_init_irq,
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 4a4b300..5f06434 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -398,8 +398,8 @@  static void __init omap_ldp_map_io(void)
 }
 
 MACHINE_START(OMAP_LDP, "OMAP LDP board")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.phys_io        = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR,
+	.io_pg_offst    = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_ldp_map_io,
 	.init_irq	= omap_ldp_init_irq,
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index af6fcee..464b432 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -125,8 +125,8 @@  static void __init n8x0_init_machine(void)
 }
 
 MACHINE_START(NOKIA_N800, "Nokia N800")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.phys_io        = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR,
+	.io_pg_offst    = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
 	.init_irq	= n8x0_init_irq,
@@ -135,8 +135,8 @@  MACHINE_START(NOKIA_N800, "Nokia N800")
 MACHINE_END
 
 MACHINE_START(NOKIA_N810, "Nokia N810")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.phys_io        = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR,
+	.io_pg_offst    = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
 	.init_irq	= n8x0_init_irq,
@@ -145,8 +145,8 @@  MACHINE_START(NOKIA_N810, "Nokia N810")
 MACHINE_END
 
 MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.phys_io        = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR,
+	.io_pg_offst    = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
 	.init_irq	= n8x0_init_irq,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 07aee90..4d30948 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -428,8 +428,8 @@  static void __init omap3_beagle_map_io(void)
 
 MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.phys_io        = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR,
+	.io_pg_offst    = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_beagle_map_io,
 	.init_irq	= omap3_beagle_init_irq,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index b3a080f..9157e3c 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -319,8 +319,8 @@  static void __init omap3_evm_map_io(void)
 
 MACHINE_START(OMAP3EVM, "OMAP3 EVM")
 	/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.phys_io        = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR,
+	.io_pg_offst    = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_evm_map_io,
 	.init_irq	= omap3_evm_init_irq,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 1991f19..05d1994 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -412,8 +412,8 @@  static void __init omap3pandora_map_io(void)
 }
 
 MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.phys_io        = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR,
+	.io_pg_offst    = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3pandora_map_io,
 	.init_irq	= omap3pandora_init_irq,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index a9d7c2e..4057a1b 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -454,8 +454,8 @@  static void __init overo_map_io(void)
 }
 
 MACHINE_START(OVERO, "Gumstix Overo")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.phys_io        = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR,
+	.io_pg_offst    = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= overo_map_io,
 	.init_irq	= overo_init_irq,
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 8a3dc61..4b97fe8 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -88,8 +88,8 @@  static void __init rx51_map_io(void)
 
 MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.phys_io        = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR,
+	.io_pg_offst    = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= rx51_map_io,
 	.init_irq	= rx51_init_irq,
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 4d295d5..58baee3 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -280,8 +280,8 @@  static void __init omap_zoom2_map_io(void)
 }
 
 MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.phys_io        = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR,
+	.io_pg_offst    = ((ZOOM2_EXT_QUART_VIRT) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_zoom2_map_io,
 	.init_irq	= omap_zoom2_init_irq,